LinHES Forums http://forum.linhes.org/ |
|
Dont know where to start about Screen Resolutions + Pics http://forum.linhes.org/viewtopic.php?f=6&t=14169 |
Page 1 of 1 |
Author: | goudiemark [ Tue Feb 13, 2007 10:39 pm ] |
Post subject: | Dont know where to start about Screen Resolutions + Pics |
Im not quite sure where to ask this question or how. Im hoping someone can point me in the right direction. I am runing R5E50. My system specs are
Asus P5800SE 1 Gb Ram (2) Pvr-150 MCE Integrated Audio Geforce 5200 MCE Remote v2 The system is connected to a tv via a svideo to rca cable. The image quality isnt that bad. There is no monitor connected currently. When in the mythtv gui the screen size was automaticly detected and working great. The tuners are set to record at 720x480 as a forum post claimed that was the best resolution for the pvr-150 to capture at. When watching tv or a recorded show the screen is fully shown but does not occupy the entire Tv. I can see a blue bar on the top and left. I tried to changed the video aspect while watching Tv to 4:3 zoom but that puts part of the screen outside the bounds of the Tv. At the end I listed my xorg.conf If the pics below dont show up here is a link to my google pic album. http://picasaweb.google.com/mark.goudie/Myth Gui - Screen takes up entire TV Playback of a recording. You can see the blue bars on the top and left. Code: Section "ServerLayout"
Identifier "XFree86 Configured" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" # PS/2 Mouse not detected # Serial Mouse not detected InputDevice "USB Mouse" "CorePointer" EndSection Section "ServerFlags" Option "AllowMouseOpenFail" "true" EndSection Section "Files" RgbPath "/usr/share/X11/rgb" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc:unscaled" FontPath "/usr/share/fonts/X11/75dpi:unscaled" FontPath "/usr/share/fonts/X11/100dpi:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/Speedo" FontPath "/usr/share/fonts/X11/PEX" # Additional fonts: Locale, Gimp, TTF... FontPath "/usr/share/fonts/X11/cyrillic" # FontPath "/usr/share/fonts/X11/latin2/75dpi" # FontPath "/usr/share/fonts/X11/latin2/100dpi" # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig! FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "/usr/share/fonts/truetype" FontPath "/usr/share/fonts/latex-ttf-fonts" EndSection Section "Module" # Comments: see http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=346408 Load "dbe" # Double Buffering Extension, very important. # Load "dri" # This shouldn't be available choice if user has selected driver vga, vesa or nv. Load "glx" # GLX Extension. Load "freetype" # Freetype fonts. Load "type1" # Type 1 fonts Load "record" # Developer extension, usually not needed # Load "extmod" # This is okay, but if you look into "man xorg.conf" you'll find option NOT to include DGA extension with extmod, and for a good reason.. DGA causes instability as it access videoram without consulting X about it. SubSection "extmod" Option "omit xfree86-dga" EndSubSection # Load "speedo" # Speedo fonts, this module doesn't exist in Xorg 7.0.17 # The following are deprecated/unstable/unneeded in Xorg 7.0 # Load "ddc" # ddc probing of monitor, this should be never present, as it gets automatically loaded. # Load "GLcore" # This should be never present, as it gets automatically loaded. # Load "bitmap" # Should be never present, as it gets automatically loaded. This is a font module, and loading it in xorg.conf makes X try to load it twice. EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Serial Mouse" Driver "mouse" Option "Protocol" "Microsoft" Option "Device" "/dev/ttyS0" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" EndSection Section "InputDevice" Identifier "PS/2 Mouse" Driver "mouse" Option "Protocol" "auto" Option "ZAxisMapping" "4 5" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" EndSection Section "InputDevice" Identifier "USB Mouse" Driver "mouse" Option "Device" "/dev/input/mice" Option "SendCoreEvents" "true" Option "Protocol" "IMPS/2" Option "ZAxisMapping" "4 5" Option "Buttons" "5" EndSection # Auto-generated by KNOPPIX mkxf86config Section "Monitor" Identifier "Monitor0" Option "DPMS" "true" Option "UseEdidDpi" "FALSE" Option "DPI" "100 x 100" # HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors VertRefresh 50.0 - 75.0 # Very conservative. May flicker. # VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default. # Default modes distilled from # "VESA and Industry Standards and Guide for Computer Display Monitor # Timing", version 1.0, revision 0.8, adopted September 17, 1998. # $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $ # 640x350 @ 85Hz (VESA) hsync: 37.9kHz ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync # 640x400 @ 85Hz (VESA) hsync: 37.9kHz ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync # 720x400 @ 85Hz (VESA) hsync: 37.9kHz ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync # 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync # 640x480 @ 72Hz (VESA) hsync: 37.9kHz ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync # 640x480 @ 75Hz (VESA) hsync: 37.5kHz ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync # 640x480 @ 85Hz (VESA) hsync: 43.3kHz ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync # 800x600 @ 56Hz (VESA) hsync: 35.2kHz ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync # 800x600 @ 60Hz (VESA) hsync: 37.9kHz ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync # 800x600 @ 72Hz (VESA) hsync: 48.1kHz ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync # 800x600 @ 75Hz (VESA) hsync: 46.9kHz ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync # 800x600 @ 85Hz (VESA) hsync: 53.7kHz ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync # 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace # 1024x768 @ 60Hz (VESA) hsync: 48.4kHz ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync # 1024x768 @ 70Hz (VESA) hsync: 56.5kHz ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync # 1024x768 @ 75Hz (VESA) hsync: 60.0kHz ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync # 1024x768 @ 85Hz (VESA) hsync: 68.7kHz ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync # 1152x864 @ 75Hz (VESA) hsync: 67.5kHz ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync # 1280x960 @ 60Hz (VESA) hsync: 60.0kHz ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync # 1280x960 @ 85Hz (VESA) hsync: 85.9kHz ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync # 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync # 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync # 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz # ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync Modeline "1280x1024" 157.50 1280 1328 1488 1728 1024 1025 1028 1072 +hsync +vsync # 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync # 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync # 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync # 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync # 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync # 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync # 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync # 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync # 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync # 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync # 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync # Additional modelines ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync # Extended modelines with GTF timings # 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync # 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync # 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync # 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync # 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync # 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync # 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync # 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync # 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync # 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync # 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync # 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync # 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync # 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync # 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync # 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync # 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync # 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync # 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync # 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync # 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync # 1920x1200 @ 60.00 Hz (GTF) hsync: 74.52; pclk: 193.16 MHz Modeline "1920x1200" 193.16 1920 2048 2256 2592 1200 1201 1204 1242 -HSync +HSync EndSection Section "Device" ### Available Driver options are:- # sw_cursor is needed for some ati and radeon cards #Option "sw_cursor" #Option "hw_cursor" #Option "NoAccel" #Option "ShowCache" #Option "ShadowFB" #Option "UseFBDev" #Option "Rotate" Identifier "Card0" # The following line is auto-generated by KNOPPIX mkxf86config Driver "nvidia" VendorName "All" BoardName "All" # BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultColorDepth 24 SubSection "Display" Depth 1 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 32 Modes "800x600" "640x480" EndSubSection EndSection Section "DRI" Mode 0666 EndSection |
Author: | tjc [ Tue Feb 13, 2007 11:18 pm ] |
Post subject: | |
Searching the forums here or the KM wiki for "blue border" should turn up directions for how to add a rule like this: Code: [startup] {xvattr -a XV_COLORKEY -v 0} to your /home/mythtv/.fluxbox/apps file. Searching for "overscan" should turn up directions on using the nvidia-settings utilty to adjust this. Amoung other things you need to add a rule like this: Code: [startup] {nvidia-settings --load-config-only}
to your /home/mythtv/.fluxbox/apps file. |
Author: | goudiemark [ Wed Feb 14, 2007 4:45 pm ] |
Post subject: | |
@ tjc Thanks so much for the help here and in all the other topics ive read your posts in. After getting rid of the blue borders, the image now using the full screen. Thanks agian! |
Author: | tjc [ Wed Feb 14, 2007 7:30 pm ] |
Post subject: | |
I still highly recommend using nvidia-settings. It's easy and there are various adjustments you can make with it which will markedly improve your picture quality. You can find a lot more infor like thsi on the troubleshooting pages: http://www.knoppmythwiki.org/index.php?page=TroubleShooting For picture qaulity tuning see: http://www.knoppmythwiki.org/index.php?page=PictureQualityIssues |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |