I seem a LOT of threads like this, but no one seems to have a problem like I do, and when they do, they already fixed it doing the things I've done.

My remote is very unreliable. It will randomly stop working for a minute, then be perfectly fine for another minute or so, then go back to not working. I have the Hauppauge silver dog bone remote. So far, I have done the following

1.) Commented out the saa1734-dvb file from KnoppMyth-tv
2.) Renamed the ir-kbd-i2c.ko file so the module doesn't start
3.) Did a cold reboot (half an hour, unplugged)
4.) Went through the lircd file (I believe) and change the /dev/lirc/0 to /dev/lirc0 and added the space in that other line
5.) Ran lirc-configure.sh and tried a few other remotes
6.) Installed the latest IVTV drivers and the latest firmware (cold reboot afterwards)

And absolutely nothing has changed the way it responds. Anyone have any ideas?

_________________
KnoppMyth R5F1
2.8GHz Pentium D
ASUS P5LP-LE Motherboard
512MB Kingston DDR2-667
GeForce 7100 GS
Sound Blaster Live! 5.1
Hauppauge PVR-150
160GB WD HDD
12X NEC DVD-RW

Change your batteries?

_________________
KnoppMyth Folding@home
How to setup F@H
F@H Stats Page

Brand new batteries, maybe 4 days old. And I have changed them just for shits and giggles anyways.

_________________
KnoppMyth R5F1
2.8GHz Pentium D
ASUS P5LP-LE Motherboard
512MB Kingston DDR2-667
GeForce 7100 GS
Sound Blaster Live! 5.1
Hauppauge PVR-150
160GB WD HDD
12X NEC DVD-RW

Do you know anyone who is using a similar card/remote? If so, try out the other IR receiver then the remote, to see if everything is OK.

Bruce S.

_________________
Updated 2019/10/26: AthlonII X2 265 Gigabyte GA-970A-DS3P
16Gb PC 1866 DDR3, 500GB+2TB+4TB SATA HDD,
SATA DVD-RW Asus DRW-24D5MT , NVIDIA GeForce GT1080
Hauppauage Nova-T 500, Nova-T LinHes R8.6.1

I agree with Bruce. I usually go to a terminal and enter the command

# irw

and then press buttons on the remote to see if anything is actually coming through the hardware.