I have two PVR-150 cards in my backend. I am getting an HD cable box tonight to hook to my tv and I am going to dedicate the current box I have for one of the 150 cards. I am going to need to use the IR blaster function of the 150 to control the box. I found this on the KMwiki http://www.knoppmythwiki.org/index.php?page=PVR150withSetTopBox
and was just hoping that this was still a good guide with the new version of KM. Id hate to mess my box up.

That worked for me except for one change I noted here:
http://mysettopbox.tv/phpBB2/viewtopic.php?t=16568&highlight=

Of course I did an upgrade, but that is what I used to configure my PVR-150's and the Satellite boxes they control.

Do remember that those codes listed are for a Dish Network Satellite Box.
You will need to choose a different set out of the lircd.conf for your Cable settopbox.

A bit of searching may turn up the Codes necessary for your new Cable Box.

I am currently on R5F27 with 2 PVR-150's in two separate boxes running that way.

_________________
KnoppMyth R5.5
MBE: AMD64 3400+, K8N Neo4 Plat., 1Gig, Asus Extreme N6200, 320G pata, 2x320Gsata, 750Gsata, PVR-150 Retail w/Blaster
SBE: AMD XP2000, GA 7ZMMH, 1 Gig, XFX 256M 6200, 20 Gig, PVR-150 Retail w/Blaster
SBE: AMD Dur1800, 512M, PVR500