| LinHES Forums http://forum.linhes.org/ |
|
| R5F27 Upgrade : Slow Response from PVR250 Remote Now http://forum.linhes.org/viewtopic.php?f=6&t=16403 |
Page 1 of 2 |
| Author: | quaffapint [ Mon Sep 10, 2007 12:45 pm ] |
| Post subject: | R5F27 Upgrade : Slow Response from PVR250 Remote Now |
Just upgraded to R5F27. I have a Haupauge PVR250 w/ grey remote. After the system is up for more than a few minutes, the remote is very sluggish to respond. It takes multiple clicks to get anything done. It's really not usable. I've changed batteries, double-checked cords, all seems fine. The system processor utilization is very low. Any ideas what could be going wrong or what to check? I never had a response issue with with R5E50. Thanks for any help. Matt |
|
| Author: | cecil [ Mon Sep 10, 2007 12:48 pm ] |
| Post subject: | |
Code: vi /etc/init.d/KnoppMyth-tv Comment the modprobe of saa7134-dvb. Reboot. Results?
|
|
| Author: | quaffapint [ Mon Sep 10, 2007 1:11 pm ] |
| Post subject: | |
Appreciate the reply Cecil... I just commented out the module and rebooted. So far it's perfectly responsive. I'll let it sit for awhile and try again - I'll let you know if it becomes sluggish at some point. Again, appreciate the help. Matt |
|
| Author: | evdogg [ Mon Sep 10, 2007 1:31 pm ] |
| Post subject: | |
cecil wrote: Code: vi /etc/init.d/KnoppMyth-tv Comment the modprobe of saa7134-dvb. Reboot. Results?I just wanted to say that I was experiencing the same problem, and that fixed it for me. Thanks! |
|
| Author: | ryscar [ Mon Sep 10, 2007 1:48 pm ] |
| Post subject: | |
cecil, I know that problem has existed for a while and it prevents me from running my HD cards in the same box as my SD cards. From what I remember, the HD cards require that module. I know that it is not a "Knoppmyth" problem, I was wondering if you knew of a work around? SD cards= PVR-250 x4 HD cards= HD-3000 x2 Thanks! |
|
| Author: | tjc [ Mon Sep 10, 2007 6:08 pm ] |
| Post subject: | |
See my response in this thread http://mysettopbox.tv/phpBB2/viewtopic.php?t=16400 This effectively the answer I'll have in the R5F27 Hints when I get done editing. |
|
| Author: | ryscar [ Mon Sep 10, 2007 10:11 pm ] |
| Post subject: | |
Thanks for posting that. As I am already doing #1, I will look into #2 . Thanks again! |
|
| Author: | Heem [ Tue Sep 11, 2007 8:19 am ] |
| Post subject: | |
Wow, ryscar, thats alot of cards, where would you even find a motherboard with that much space on it? Anyway.. on topic.. I'm having the same issue on a fresh install with a PVR-350 card. Will try that fix tonight when I get home. Thanks! |
|
| Author: | ryscar [ Tue Sep 11, 2007 8:51 am ] |
| Post subject: | |
Let me know how it goes. I haven't quite decided if I will attempt putting everything back into one box again. It may be more trouble then it's worth at this time. Everything works now and with my luck I will do something lame like delete the database some how. As for all the cards, I was going to get rid of a couple of the 250's in favor of the HD3000's. I also have a PVR-500 laying aroung that I was going to put in. |
|
| Author: | snaef999 [ Tue Sep 11, 2007 7:27 pm ] |
| Post subject: | |
I have 2 PVR-250 cards, one is an OEM (no remote) and one is from Circuit City (with remote). Ever since I went to R5Fx and now F27 the gray remote has been sluggish as quaffapint reports. I tried the fix posted by cecil but that cause my remote to not work at all. I have not read the other thread by tjc, but will try that tonight. Is there something else I can try?? I would not be against going to another remote setup to get more buttons. Is there an easy solution for this? USB IR receiver and RS remote? Thank you! Scott |
|
| Author: | snaef999 [ Tue Sep 11, 2007 7:44 pm ] |
| Post subject: | |
Well, I removed the kernel module as posted by tjc here: http://mysettopbox.tv/phpBB2/viewtopic.php?t=16400 ... and it worked! Thank you cecil and tjc for the suggestions in this post. |
|
| Author: | ChapmanI [ Tue Sep 11, 2007 7:50 pm ] |
| Post subject: | |
ryscar wrote: SD cards= PVR-250 x4 HD cards= HD-3000 x2 Heem wrote: Wow, ryscar, thats alot of cards, where would you even find a motherboard with that much space on it?
I wonder where ryscar finds the time to watch the amount of TV that six cards would record! 
|
|
| Author: | ryscar [ Tue Sep 11, 2007 8:29 pm ] |
| Post subject: | |
Quote: I wonder where ryscar finds the time to watch the amount of TV that six cards would record!
Thats the beauty of Knoppmyth... Any time I want!! |
|
| Author: | Heem [ Wed Sep 12, 2007 3:44 am ] |
| Post subject: | |
Quote: TV that six cards would record!
I dont even think I like 6 different TV shows 
|
|
| Author: | kmkittre [ Wed Sep 12, 2007 8:18 pm ] |
| Post subject: | |
I think 4 cards is ideal: 2 SD and 2 HD. I rarely run into 3 shows at the same time I want to record... |
|
| Page 1 of 2 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|