| LinHES Forums http://forum.linhes.org/ |
|
| Audio burst of static http://forum.linhes.org/viewtopic.php?f=6&t=17066 |
Page 1 of 1 |
| Author: | L0o0ky [ Tue Oct 23, 2007 12:49 pm ] |
| Post subject: | Audio burst of static |
Hello All, Spec's below. Since I upgraded to R5f1 I've been getting random bursts of audio static. This did not happen with any previous version of Knoppmyth (previous 5 versions). It happens on every channel, and about 4 or 5 times per half-hour. I have the video set as the timebase and the aggressive sound buffering enabled. Master volume is set to about 80%. Any suggestions for how to solve this one? Any more info required? thanks, L0o0ky, The specs: P4 3.0GHZ (prescott) 1GB RAM ASUS P4P800 MB PVR-500 300GB & 500GB drives in LVM Onboard sound 3com 3c905B (gigabit port died) |
|
| Author: | bigbro [ Tue Oct 23, 2007 3:30 pm ] |
| Post subject: | |
I was noticing a couple of issue similar to this. I even noticed a few cases where my video would be blotchy for a second and then return to normal. When I looked around at some of my Log files, I found Application not reading fast enough. which seemed to coincide with the time these issues showed up. I followed the instructions in this post http://mysettopbox.tv/phpBB2/viewtopic.php?p=100940 Increasing the size of my Mpeg buffers. I don't know if this exaclty fixed it but captures now are great. I noticed immediately that my log erros went away but more importantly I am not seeing the video blocky issues or hearing the static burps in my captures. I also have a PVR-500 and 2 PVR-150 cards it helped on all of them. hth. |
|
| Author: | L0o0ky [ Thu Oct 25, 2007 9:22 am ] |
| Post subject: | |
bigbro wrote: I was noticing a couple of issue similar to this. I even noticed a few cases where my video would be blotchy for a second and then return to normal.
When I looked around at some of my Log files, I found Application not reading fast enough. which seemed to coincide with the time these issues showed up. I followed the instructions in this post http://mysettopbox.tv/phpBB2/viewtopic.php?p=100940 Increasing the size of my Mpeg buffers. I don't know if this exaclty fixed it but captures now are great. I noticed immediately that my log erros went away but more importantly I am not seeing the video blocky issues or hearing the static burps in my captures. I also have a PVR-500 and 2 PVR-150 cards it helped on all of them. hth. Unfortunately, I'm not seeing any errors in my log files that even remotely resemble the ones in that post--not sure I'm seeing any at all. As far as the video signal, there are no distortions during the times of the static burst of noise. --L0o0ky |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|