| LinHES Forums http://forum.linhes.org/ |
|
| 99 99 99....after upgrade http://forum.linhes.org/viewtopic.php?f=6&t=17660 |
Page 1 of 1 |
| Author: | ed3120 [ Thu Jan 17, 2008 7:43 pm ] |
| Post subject: | 99 99 99....after upgrade |
My motherboard died, so I just replaced it with another brand. Myth booted OK after the replacement, but I figured I should rerun the R5F27 upgrade CD to let it re-detect the drivers and everything. I did the upgrade and it through some I/O errors during the install. Now when I boot I get a series of: 99 99 99 99 99...etc What happened? Is there anything that I can do to recover? (Unfortunately, I don't have a recovery diskette.) |
|
| Author: | tjc [ Thu Jan 17, 2008 7:52 pm ] |
| Post subject: | |
Start here: http://www.knoppmythwiki.org/index.php?page=WillNotBoot And here: http://www.knoppmythwiki.org/index.php?page=BlackScreenAfterInstall These include instructions on how to use the CD as a rescue disk... I thought we had a page specifically on that, but it didn't turn up after a quick search... |
|
| Author: | ed3120 [ Thu Jan 17, 2008 8:06 pm ] |
| Post subject: | |
Thanks TJC. Shockingly, I just fixed it by putting both my master and slave drives on the same IDE cable. I had them on the same cable with my old motherboard and when I put the new motherboard in I put them on different cables because I had the room to. I ended up putting them back on the primary IDE, rerunning the R5F27 upgrade and it worked. I guess that's a lesson for everyone...don't go changing drive cables around during an upgrade. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|