Hello forum,
after a while I try again to get R5.5 working on my VIA Epia ME6000 Mainboard.
Again, I did a clean Auto Install and again I face similar problems like above.
When I start "watching TV" I see a black screen for a few seconds, then Mythfrontend crashes.
My settings in Mythfrontend configuration TV playback:
I added a new output profile with only one setting for all resolutions:
Code:
Decoder: VIA XvMC #this sounds suitable for VIA CLE266 decoder#
Video Renderer: xvmc-blit #nothing else selectable#
When I run Mythfrontend in a terminal, I receive those messages:
Code:
[...]
2011-11-03 21:56:29.871 Connecting to backend server: 127.0.0.1:6543 (try 1 of 5)
2011-11-03 21:56:29.876 Using protocol version 40
2011-11-03 21:56:29.899 TV: Attempting to change from None to WatchingLiveTV
2011-11-03 21:56:29.902 Using protocol version 40
2011-11-03 21:56:33.264 New DB connection, total: 3
2011-11-03 21:56:33.266 Connected to database 'mythconverg' at host: 127.0.0.1
2011-11-03 21:56:33.372 NVP: Disabling Audio, params(-1,2,44100)
2011-11-03 21:56:33.811 VideoOutputXv: Desired video renderer 'xvmc-blit' not available.
codec 'None' makes 'opengl,xv-blit,xshm,xlib,' available, using 'opengl' instead.
2011-11-03 21:56:34.480 GLVid, Error: Fatal error
here some lines of my xorg.conf (generated during installation):
Code:
[....]
Section "Device"
### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
#Option "sw_cursor"
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
Identifier "Card0"
# The following line is auto-generated by KNOPPIX mkxf86config
Driver "openchrome"
VendorName "All"
BoardName "All"
# BusID "PCI:1:0:0"
EndSection
[...]
$lsmod | grep via
Code:
via 43520 2
drm 75668 3 via
snd_via82xx 26776 0
gameport 15240 1 snd_via82xx
snd_ac97_codec 99620 1 snd_via82xx
snd_pcm 70916 3 snd_via82xx,snd_ac97_codec,snd_pcm_oss
snd_page_alloc 11912 2 snd_via82xx,snd_pcm
snd_mpu401_uart 10880 1 snd_via82xx
i2c_viapro 11412 0
via_agp 12160 1
via_ircc 23572 0
agpgart 30808 2 drm,via_agp
i2c_core 23680 4 i2c_viapro,mt352,stv0299,b2c2_flexcop
snd 52644 12 snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_mpu401_uart,snd_seq_dummy,snd_seq_oss,snd_seq,snd_timer,snd_rawmidi,snd_seq_device
irda 122552 1 via_ircc
I have a fine playback of
DVD with low CPU load using
xine -V
xxmc dvd://
So HW acceleration through CLE266 seems to work.
here
http://ubuntuforums.org/showpost.php?p= ... stcount=14 I found a posting with a similar problem. May I try this?
What else may I do?