| LinHES Forums http://forum.linhes.org/ |
|
| Blank Screen on "Watch TV" and "Watch Recordi http://forum.linhes.org/viewtopic.php?f=6&t=2593 |
Page 1 of 2 |
| Author: | markm [ Tue Oct 05, 2004 4:22 pm ] |
| Post subject: | Blank Screen on "Watch TV" and "Watch Recordi |
Hello, I've had Mythtv running for about 3 months and managed to get everything working OK. A few weeks ago upgraded to 0.16. and followed the walk through here http://mysettopbox.tv/phpBB2/viewtopic.php?t=2495&postdays=0&postorder=asc&start=0 Since then I have been unable to watch 'Live TV' or 'Watch Recording' of any of the recorded programmes. I can watch DVDs on the Myth box and I can copy recorded programs and watch them on a networked Windows machine. So I assume the video drivers and tuner are working correctly. Once I watch live TV, I can't seem to get back into Myth and have to re-boot the box via PuTTY. I've looked at the logs Code: 2004-09-29 23:15:42 mythfrontend version: 0.16.20040906-1 www.mythtv.org
2004-09-29 23:15:42 Enabled verbose msgs : important general 2004-09-29 23:15:43 Registering Internal as a media playback plugin. 2004-09-29 23:15:43 Registering MythDVD DVD Media Handler as a media handler 2004-09-29 23:15:43 Registering MythDVD VCD Media Handler as a media handler 2004-09-29 23:15:43 Registering MythMusic Media Handler as a media handler 2004-09-29 23:15:44 Mediamonitor: Adding /dev/cdrom 2004-09-29 23:15:44 Mediamonitor: Adding /dev/dvd 2004-09-29 23:15:44 Starting media monitor. 2004-09-29 23:15:54 Connecting to backend server: 127.0.0.1:6543 (try 1 of 5) 2004-09-29 23:15:54 Using protocol version 13 2004-09-29 23:15:54 Using protocol version 13 2004-09-29 23:15:54 Using protocol version 13 2004-09-29 23:15:57 Opening OSS audio device '/dev/dsp'. 2004-09-29 23:15:57 Audio fragment size: 4096 2004-09-29 23:15:57 Using XV port 53 2004-09-29 23:15:57 Changing from None to WatchingLiveTV 2004-09-29 23:15:58 Using realtime priority. I've searched 'til I'm blue in the face and exhausted the patience of a Linux (but not Myth) guru I work with. I only use the monitor output. I'm in the UK. It's a Shuttle SN41G2 with a PVR250. If there are any pointers or help I would truly appreciate it. regards Mark. |
|
| Author: | Xsecrets [ Tue Oct 05, 2004 4:26 pm ] |
| Post subject: | |
well first you've got to find the problem. there were no errors in that log. look in the /var/log/messages file and the /var/log/mythtv/mythbackend file, and if neccesary the /var/log/syslog also you may not have to reboot if you can get in with putty. so next time run mythfrontend from a terminal, and if it locks up get in with putty and do killall mythfrontend which should kill the myth interface and leave you with an xterm with some erros in it. |
|
| Author: | markm [ Tue Oct 05, 2004 4:49 pm ] |
| Post subject: | |
Thank you for the quick reply and at the risk of trying to take advantage of this here's the Mythbackend log file Code: 2004-10-05 07:29:42 Found changes in the todo list. 2004-10-05 07:29:42 Scheduled 2 items in 0.016099 seconds. 2004-10-05 13:24:54 MainServer::HandleAnnounce Playback 2004-10-05 13:24:54 adding: mythtv as a client (events: 0) 2004-10-05 13:34:38 Found changes in the todo list. 2004-10-05 13:34:38 Scheduled 2 items in 0.015096 seconds. 2004-10-05 13:41:20 MainServer::HandleAnnounce Playback 2004-10-05 13:41:20 adding: mythtv as a client (events: 0) 2004-10-05 13:41:26 MainServer::HandleAnnounce Playback 2004-10-05 13:41:26 adding: mythtv as a client (events: 0) 2004-10-05 13:41:33 MainServer::HandleAnnounce Playback 2004-10-05 13:41:33 adding: mythtv as a client (events: 0) 2004-10-05 13:45:57 Found changes in the todo list. 2004-10-05 13:45:57 Scheduled 4 items in 0.016008 seconds. 2004-10-05 14:00:08 MainServer::HandleAnnounce Playback 2004-10-05 14:00:08 adding: mythtv as a client (events: 0) 2004-10-05 14:00:19 MainServer::HandleAnnounce Playback 2004-10-05 14:00:19 adding: mythtv as a client (events: 0) 2004-10-05 14:00:33 MainServer::HandleAnnounce Playback 2004-10-05 14:00:33 adding: mythtv as a client (events: 0) 2004-10-05 23:33:13 MainServer::HandleAnnounce Playback 2004-10-05 23:33:13 adding: mythtv as a client (events: 0) 2004-10-05 23:33:13 MainServer::HandleAnnounce Playback 2004-10-05 23:33:13 adding: mythtv as a client (events: 0) 2004-10-05 23:33:13 adding: mythtv as a remote ringbuffer 2004-10-05 23:33:13 Changing from None to WatchingLiveTV and here's the messages log Code: Oct 5 23:33:13 mythtv kernel: saa7115[0]: decoder set size Oct 5 23:33:13 mythtv kernel: Hpsc: 0x00001, Hfsc: 0x00600 Oct 5 23:33:13 mythtv kernel: Vsrc: 576, Vscy: 0x004cc Oct 5 23:33:16 mythtv kernel: NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6111 Tue Jul 27 07:55:38 PDT 2004 and the syslog Code: Oct 5 23:30:01 mythtv /USR/SBIN/CRON[6433]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
Oct 5 23:33:13 mythtv kernel: saa7115[0]: decoder set picture bright=140 contrast=55 saturation=44 hue=-25 Oct 5 23:33:13 mythtv last message repeated 3 times Oct 5 23:33:13 mythtv kernel: saa7115[0]: decoder set size Oct 5 23:33:13 mythtv kernel: Hpsc: 0x00001, Hfsc: 0x00600 Oct 5 23:33:13 mythtv kernel: Vsrc: 576, Vscy: 0x004cc Oct 5 23:33:13 mythtv kernel: saa7115[0]: decoder disable output Oct 5 23:33:14 mythtv kernel: saa7115[0]: decoder enable output Oct 5 23:33:16 mythtv kernel: NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6111 Tue Jul 27 07:55:38 PDT 2004 Oct 5 23:33:16 mythtv insmod: Warning: loading /lib/modules/2.4.25-chw/kernel/drivers/video/nvidia.o will taint the kernel: non-GPL license - NVIDIA Oct 5 23:33:16 mythtv insmod: See http://www.tux.org/lkml/#export-tainted for information about tainted modules Oct 5 23:33:16 mythtv insmod: Module nvidia loaded, with warnings Oct 5 23:35:01 mythtv /USR/SBIN/CRON[6452]: (root) CMD (nice -n 19 /usr/local/bin/mythlink.sh) Oct 5 23:40:01 mythtv /USR/SBIN/CRON[6459]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck) Oct 5 23:43:28 mythtv kernel: saa7115[0]: decoder set input (0) Oct 5 23:43:28 mythtv kernel: saa7115[0]: now setting Composite input Oct 5 23:43:28 mythtv kernel: saa7115[0]: decoder set norm PAL Oct 5 23:43:28 mythtv kernel: saa7115[0] set audio: 0x02 Oct 5 23:43:28 mythtv kernel: saa7115[0]: decoder set input (4) Oct 5 23:43:28 mythtv kernel: saa7115[0]: now setting Composite input Oct 5 23:43:29 mythtv kernel: saa7115[0]: decoder set norm PAL Oct 5 23:43:29 mythtv kernel: saa7115[0] set audio: 0x02 Oct 5 23:43:29 mythtv kernel: saa7115[0]: decoder set picture bright=140 contrast=55 saturation=44 hue=-25 Oct 5 23:43:29 mythtv last message repeated 3 times Thank you again for the help. Mark |
|
| Author: | Xsecrets [ Tue Oct 05, 2004 5:09 pm ] |
| Post subject: | |
I still don't really see any problems could you try running the frontend from an xterm and then seeing what kind of errors show up there? |
|
| Author: | turpie [ Wed Oct 06, 2004 1:29 am ] |
| Post subject: | |
I seem to be having the same problem as markm. When I tried running the FE from an xterm I got the following: Quote: Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0". 2004-10-06 17:23:21 mythfrontend version: 0.16.20040906-1 www.mythtv.org 2004-10-06 17:23:21 Enabled verbose msgs : important general 2004-10-06 17:23:22 Registering Internal as a media playback plugin. 2004-10-06 17:23:22 Registering MythDVD DVD Media Handler as a media handler 2004-10-06 17:23:22 Registering MythDVD VCD Media Handler as a media handler 2004-10-06 17:23:22 Registering MythMusic Media Handler as a media handler 2004-10-06 17:23:30 All Programs 2004-10-06 17:23:31 Connecting to backend server: 172.16.1.240:6543 (try 1 of 5) 2004-10-06 17:23:31 Using protocol version 13 2004-10-06 17:23:31 Using protocol version 13 2004-10-06 17:23:38 Opening OSS audio device '/dev/dsp'. 2004-10-06 17:23:38 Audio fragment size: 4096 2004-10-06 17:23:38 Using XV port 53 2004-10-06 17:23:39 Changing from None to WatchingPreRecorded pthread_setschedparam: Operation not permitted 2004-10-06 17:23:39 Running as SUID root would allow some threads to run with re altime priority, improving video smoothness. waiting for free video buffers timed out waiting for free video buffers timed out waiting for free video buffers timed out ... Could it be something to do with the nvidia drivers that we are both using? |
|
| Author: | Xsecrets [ Wed Oct 06, 2004 6:39 am ] |
| Post subject: | |
well you are not the only ones using those nvidia drivers. Are either or both of you using xvmc, because that may be causing problems since mythtv was compiled with the library from the older nvidia drivers. Otherwise I'm just not seeing the error. |
|
| Author: | markm [ Wed Oct 06, 2004 3:11 pm ] |
| Post subject: | |
I think my problem may be different. If I run killall mythfrontend from PuTTY the monitor does not revert back to the grey KnoppMyth background with an Xterm window. Instead it remains as a black screen. At this point I ran top Code: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ Command
629 root 20 -10 70088 19m 12m R 99.9 9.1 5:50.47 XFree86 1 root 8 0 76 76 48 S 0.0 0.0 0:04.75 init 2 root 9 0 0 0 0 S 0.0 0.0 0:00.01 keventd 3 root 19 19 0 0 0 S 0.0 0.0 0:00.01 ksoftirqd_CPU0 4 root 9 0 0 0 0 S 0.0 0.0 0:00.00 kswapd 5 root 9 0 0 0 0 S 0.0 0.0 0:00.00 bdflush 6 root 9 0 0 0 0 S 0.0 0.0 0:00.01 kupdated 8 root 9 0 0 0 0 S 0.0 0.0 0:00.13 kjournald 86 root 9 0 0 0 0 S 0.0 0.0 0:00.00 khubd 130 root 9 0 0 0 0 S 0.0 0.0 0:00.00 pagebufd 131 root 9 0 0 0 0 S 0.0 0.0 0:00.00 xfslogd/0 132 root 9 0 0 0 0 S 0.0 0.0 0:00.00 xfsdatad/0 198 root 9 0 0 0 0 S 0.0 0.0 0:00.00 kjournald 261 root 9 0 748 744 632 S 0.0 0.3 0:00.01 pump 271 daemon 9 0 420 420 352 S 0.0 0.2 0:00.00 portmap 374 root 9 0 612 612 516 S 0.0 0.3 0:00.01 syslogd 383 root 9 0 1240 1240 476 S 0.0 0.6 0:00.05 klogd Does this offer any clues? regards and more thanks Mark. |
|
| Author: | sootzoo [ Wed Oct 06, 2004 3:29 pm ] |
| Post subject: | |
No, that's not particularly insightful, sorry. What we need to see, as mentioned before, is dmesg or syslog or /var/log/messages output when you start / kill the frontend / backend. Top doesn't even give you a full process list, `ps ax` would be more helpful, but I'd rather see a timeline with the timestamped logfiles to go along with it. It'll take you some time and some editing to pull together, but there are too many variables here and nothing obvious that's jumping out at me. Sorry. |
|
| Author: | markm [ Wed Oct 06, 2004 4:14 pm ] |
| Post subject: | |
OK, sorry if I missed the point. Here's the log as I started mythfrontend Code: 2004-10-06 22:44:22 mythfrontend version: 0.16.20040906-1 www.mythtv.org 2004-10-06 22:44:22 Enabled verbose msgs : important general 2004-10-06 22:44:23 Registering Internal as a media playback plugin. 2004-10-06 22:44:23 Registering MythDVD DVD Media Handler as a media handler 2004-10-06 22:44:23 Registering MythDVD VCD Media Handler as a media handler 2004-10-06 22:44:23 Registering MythMusic Media Handler as a media handler 2004-10-06 22:44:24 Mediamonitor: Adding /dev/cdrom 2004-10-06 22:44:24 Mediamonitor: Adding /dev/dvd 2004-10-06 22:44:24 Starting media monitor. and here's the dmesg file Code: Linux version 2.4.25-chw (root@km_dev.mysettopbox.tv) (gcc version 3.3.2 20030812 (Debian prerelease)) #1 Sat Apr 10 15:46:31 PDT 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000dff0000 (usable) BIOS-e820: 000000000dff0000 - 000000000dff3000 (ACPI NVS) BIOS-e820: 000000000dff3000 - 000000000e000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 223MB LOWMEM available. On node 0 totalpages: 57328 zone(0): 4096 pages. zone(1): 53232 pages. zone(2): 0 pages. Kernel command line: auto BOOT_IMAGE=Linux ro root=301 hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi hdg=scsi hdh=scsi apm=power-off nomce ide_setup: hda=scsi ide_setup: hdb=scsi ide_setup: hdc=scsi ide_setup: hdd=scsi ide_setup: hde=scsi ide_setup: hdf=scsi ide_setup: hdg=scsi ide_setup: hdh=scsi Initializing CPU#0 Detected 1830.036 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3643.80 BogoMIPS Memory: 223820k/229312k available (1363k kernel code, 5104k reserved, 490k data, 116k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000 CPU: AMD Athlon(tm) XP 2500+ stepping 00 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb760, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router default [10de/01e0] at 00:00.0 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Disk quotas vdquot_6.5.1 pty: 256 Unix98 ptys configured FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE2: IDE controller at PCI slot 00:09.0 NFORCE2: chipset revision 162 NFORCE2: not 100% native mode: will probe irqs later AMD_IDE: Bios didn't set cable bits corectly. Enabling workaround. AMD_IDE: nVidia Corporation nForce2 IDE (rev a2) UDMA100 controller on pci00:09.0 ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA hda: ST3160023A, ATA DISK drive hdc: SONY DVD RW DRU-500A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 312581808 sectors (160042 MB) w/8192KiB Cache, CHS=19457/255/63 ide-cd: passing drive hdc to ide-scsi emulation. hdc: attached ide-scsi driver. Partition check: hda: hda1 hda2 hda3 hda4 ide: late registration of driver. Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found Highpoint HPT370 Softwareraid driver for linux version 0.02 Guestimating sector 312560384 for superblock driver for Silicon Image(tm) Medley(tm) hardware version 0.0.1: No raid array found SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: SONY Model: DVD RW DRU-500A Rev: 2.0f Type: CD-ROM ANSI SCSI revision: 02 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 31x/31x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 150k freed VFS: Mounted root (ext2 filesystem). Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 116k freed Adding Swap: 835372k swap-space (priority -1) EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal Real Time Clock Driver v1.10f usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Setting latency timer of device 00:02.0 to 64 usb-ohci.c: USB OHCI at membase 0xce8ae000, IRQ 11 usb-ohci.c: usb-00:02.0, nVidia Corporation nForce2 USB Controller usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 3 ports detected PCI: Setting latency timer of device 00:02.1 to 64 usb-ohci.c: USB OHCI at membase 0xce8b0000, IRQ 3 usb-ohci.c: usb-00:02.1, nVidia Corporation nForce2 USB Controller (#2) usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 3 ports detected Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.23. PCI: Setting latency timer of device 00:04.0 to 64 eth0: forcedeth.c: subsystem: 01297:f541 bound to 00:04.0 Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 176M agpgart: Detected NVIDIA nForce2 chipset agpgart: AGP aperture is 64M @ 0xd0000000 PCI: Setting latency timer of device 00:06.0 to 64 intel8x0: clocking to 47459 SGI XFS with realtime, no debug enabled SGI XFS Quota Management subsystem NTFS driver v1.1.22 [Flags: R/W MODULE] EFS: 1.0a - http://aeschi.ch.eu.org/efs/ ttyS1: LSR safety check engaged! ttyS1: LSR safety check engaged! kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,4), internal journal EXT3-fs: mounted filesystem with ordered data mode. smbfs: mount_data version 1919251317 is not supported here's the messages before it crashed Code: Oct 6 22:37:31 mythtv kernel: Kernel logging (proc) stopped. Oct 6 22:37:31 mythtv kernel: Kernel log daemon terminating. Oct 6 22:37:31 mythtv exiting on signal 15 Oct 6 22:39:03 mythtv syslogd 1.4.1#10: restart. Oct 6 22:39:03 mythtv kernel: klogd 1.4.1#10, log source = /proc/kmsg started. Oct 6 22:39:03 mythtv kernel: Inspecting /boot/System.map-2.4.25-chw Oct 6 22:39:03 mythtv kernel: Loaded 18648 symbols from /boot/System.map-2.4.25-chw. Oct 6 22:39:03 mythtv kernel: Symbols match kernel version 2.4.25. Oct 6 22:39:03 mythtv kernel: Loaded 1357 symbols from 29 modules. Oct 6 22:39:03 mythtv kernel: Linux version 2.4.25-chw (root@km_dev.mysettopbox.tv) (gcc version 3.3.2 20030812 (Debian prerelease)) #1 Sat Apr 10 15:46:31 PDT 2004 Oct 6 22:39:03 mythtv kernel: BIOS-provided physical RAM map: Oct 6 22:39:03 mythtv kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) Oct 6 22:39:03 mythtv kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Oct 6 22:39:03 mythtv kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Oct 6 22:39:03 mythtv kernel: BIOS-e820: 0000000000100000 - 000000000dff0000 (usable) Oct 6 22:39:03 mythtv kernel: BIOS-e820: 000000000dff0000 - 000000000dff3000 (ACPI NVS) Oct 6 22:39:03 mythtv kernel: BIOS-e820: 000000000dff3000 - 000000000e000000 (ACPI data) Oct 6 22:39:03 mythtv kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Oct 6 22:39:03 mythtv kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Oct 6 22:39:03 mythtv kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Oct 6 22:39:03 mythtv kernel: 0MB HIGHMEM available. Oct 6 22:39:03 mythtv kernel: 223MB LOWMEM available. Oct 6 22:39:03 mythtv kernel: On node 0 totalpages: 57328 Oct 6 22:39:03 mythtv kernel: zone(0): 4096 pages. Oct 6 22:39:03 mythtv kernel: zone(1): 53232 pages. Oct 6 22:39:03 mythtv kernel: zone(2): 0 pages. Oct 6 22:39:03 mythtv kernel: Kernel command line: auto BOOT_IMAGE=Linux ro root=301 hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi hdg=scsi hdh=scsi apm=power-off nomce Oct 6 22:39:03 mythtv kernel: ide_setup: hda=scsi Oct 6 22:39:03 mythtv kernel: ide_setup: hdb=scsi Oct 6 22:39:03 mythtv kernel: ide_setup: hdc=scsi Oct 6 22:39:03 mythtv kernel: ide_setup: hdd=scsi Oct 6 22:39:03 mythtv kernel: ide_setup: hde=scsi Oct 6 22:39:03 mythtv kernel: ide_setup: hdf=scsi Oct 6 22:39:03 mythtv kernel: ide_setup: hdg=scsi Oct 6 22:39:03 mythtv kernel: ide_setup: hdh=scsi Oct 6 22:39:03 mythtv kernel: Initializing CPU#0 Oct 6 22:39:03 mythtv kernel: Detected 1830.036 MHz processor. Oct 6 22:39:03 mythtv kernel: Console: colour VGA+ 80x25 Oct 6 22:39:03 mythtv kernel: Calibrating delay loop... 3643.80 BogoMIPS Oct 6 22:39:03 mythtv kernel: Memory: 223820k/229312k available (1363k kernel code, 5104k reserved, 490k data, 116k init, 0k highmem) Oct 6 22:39:03 mythtv kernel: Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Oct 6 22:39:03 mythtv kernel: Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Oct 6 22:39:03 mythtv kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes) Oct 6 22:39:03 mythtv kernel: Buffer cache hash table entries: 16384 (order: 4, 65536 bytes) Oct 6 22:39:03 mythtv kernel: Page-cache hash table entries: 65536 (order: 6, 262144 bytes) Oct 6 22:39:03 mythtv kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Oct 6 22:39:03 mythtv kernel: CPU: L2 Cache: 512K (64 bytes/line) Oct 6 22:39:03 mythtv kernel: CPU: AMD Athlon(tm) XP 2500+ stepping 00 Oct 6 22:39:03 mythtv kernel: Enabling fast FPU save and restore... done. Oct 6 22:39:03 mythtv kernel: Enabling unmasked SIMD FPU exception support... done. Oct 6 22:39:03 mythtv kernel: Checking 'hlt' instruction... OK. Oct 6 22:39:03 mythtv kernel: POSIX conformance testing by UNIFIX Oct 6 22:39:03 mythtv kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) Oct 6 22:39:03 mythtv kernel: mtrr: detected mtrr type: Intel Oct 6 22:39:03 mythtv kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb760, last bus=2 Oct 6 22:39:03 mythtv kernel: PCI: Using configuration type 1 Oct 6 22:39:03 mythtv kernel: PCI: Probing PCI hardware Oct 6 22:39:03 mythtv kernel: PCI: Probing PCI hardware (bus 00) Oct 6 22:39:03 mythtv kernel: PCI: Using IRQ router default [10de/01e0] at 00:00.0 Oct 6 22:39:03 mythtv kernel: isapnp: Scanning for PnP cards... Oct 6 22:39:03 mythtv kernel: isapnp: No Plug & Play device found Oct 6 22:39:03 mythtv kernel: Linux NET4.0 for Linux 2.4 Oct 6 22:39:03 mythtv kernel: Based upon Swansea University Computer Society NET3.039 Oct 6 22:39:03 mythtv kernel: Initializing RT netlink socket Oct 6 22:39:03 mythtv kernel: Starting kswapd Oct 6 22:39:03 mythtv kernel: VFS: Disk quotas vdquot_6.5.1 Oct 6 22:39:03 mythtv kernel: pty: 256 Unix98 ptys configured Oct 6 22:39:03 mythtv kernel: FDC 0 is a post-1991 82077 Oct 6 22:39:03 mythtv kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Oct 6 22:39:03 mythtv kernel: loop: loaded (max 8 devices) Oct 6 22:39:03 mythtv kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 Oct 6 22:39:03 mythtv kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Oct 6 22:39:03 mythtv kernel: NFORCE2: IDE controller at PCI slot 00:09.0 Oct 6 22:39:03 mythtv kernel: NFORCE2: chipset revision 162 Oct 6 22:39:03 mythtv kernel: NFORCE2: not 100%% native mode: will probe irqs later Oct 6 22:39:03 mythtv kernel: AMD_IDE: Bios didn't set cable bits corectly. Enabling workaround. Oct 6 22:39:03 mythtv kernel: AMD_IDE: nVidia Corporation nForce2 IDE (rev a2) UDMA100 controller on pci00:09.0 Oct 6 22:39:03 mythtv kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA Oct 6 22:39:03 mythtv kernel: ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Oct 6 22:39:03 mythtv kernel: hda: ST3160023A, ATA DISK drive Oct 6 22:39:03 mythtv kernel: hdc: SONY DVD RW DRU-500A, ATAPI CD/DVD-ROM drive Oct 6 22:39:03 mythtv kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Oct 6 22:39:03 mythtv kernel: ide1 at 0x170-0x177,0x376 on irq 15 Oct 6 22:39:03 mythtv kernel: hda: attached ide-disk driver. Oct 6 22:39:03 mythtv kernel: hda: host protected area => 1 Oct 6 22:39:03 mythtv kernel: hda: 312581808 sectors (160042 MB) w/8192KiB Cache, CHS=19457/255/63 Oct 6 22:39:03 mythtv kernel: ide-cd: passing drive hdc to ide-scsi emulation. Oct 6 22:39:03 mythtv kernel: hdc: attached ide-scsi driver. Oct 6 22:39:03 mythtv kernel: Partition check: Oct 6 22:39:03 mythtv kernel: hda: hda1 hda2 hda3 hda4 Oct 6 22:39:03 mythtv kernel: Highpoint HPT370 Softwareraid driver for linux version 0.02 Oct 6 22:39:03 mythtv kernel: Guestimating sector 312560384 for superblock Oct 6 22:39:03 mythtv kernel: SCSI subsystem driver Revision: 1.00 Oct 6 22:39:03 mythtv kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices Oct 6 22:39:03 mythtv kernel: Vendor: SONY Model: DVD RW DRU-500A Rev: 2.0f Oct 6 22:39:03 mythtv kernel: Type: CD-ROM ANSI SCSI revision: 02 Oct 6 22:39:03 mythtv kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Oct 6 22:39:03 mythtv kernel: sr0: scsi3-mmc drive: 31x/31x writer cd/rw xa/form2 cdda tray Oct 6 22:39:03 mythtv kernel: Uniform CD-ROM driver Revision: 3.12 Oct 6 22:39:03 mythtv kernel: Initializing Cryptographic API Oct 6 22:39:03 mythtv kernel: NET4: Linux TCP/IP 1.0 for NET4.0 Oct 6 22:39:03 mythtv kernel: IP Protocols: ICMP, UDP, TCP, IGMP Oct 6 22:39:03 mythtv kernel: IP: routing cache hash table of 2048 buckets, 16Kbytes Oct 6 22:39:03 mythtv kernel: TCP: Hash tables configured (established 16384 bind 32768) Oct 6 22:39:03 mythtv kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Oct 6 22:39:03 mythtv kernel: RAMDISK: Compressed image found at block 0 Oct 6 22:39:03 mythtv kernel: Freeing initrd memory: 150k freed Oct 6 22:39:03 mythtv kernel: VFS: Mounted root (ext2 filesystem). Oct 6 22:39:03 mythtv kernel: Journalled Block Device driver loaded Oct 6 22:39:03 mythtv kernel: kjournald starting. Commit interval 5 seconds Oct 6 22:39:03 mythtv kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal Oct 6 22:39:03 mythtv kernel: EXT3-fs: mounted filesystem with ordered data mode. Oct 6 22:39:03 mythtv kernel: Freeing unused kernel memory: 116k freed Oct 6 22:39:03 mythtv kernel: Adding Swap: 835372k swap-space (priority -1) Oct 6 22:39:03 mythtv kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal Oct 6 22:39:03 mythtv kernel: Real Time Clock Driver v1.10f Oct 6 22:39:03 mythtv kernel: usb.c: registered new driver usbdevfs Oct 6 22:39:03 mythtv kernel: usb.c: registered new driver hub Oct 6 22:39:03 mythtv kernel: usb-ohci.c: USB OHCI at membase 0xce8ae000, IRQ 11 Oct 6 22:39:03 mythtv kernel: usb-ohci.c: usb-00:02.0, nVidia Corporation nForce2 USB Controller Oct 6 22:39:03 mythtv kernel: usb.c: new USB bus registered, assigned bus number 1 Oct 6 22:39:03 mythtv kernel: hub.c: USB hub found Oct 6 22:39:03 mythtv kernel: hub.c: 3 ports detected Oct 6 22:39:03 mythtv kernel: usb-ohci.c: USB OHCI at membase 0xce8b0000, IRQ 3 Oct 6 22:39:03 mythtv kernel: usb-ohci.c: usb-00:02.1, nVidia Corporation nForce2 USB Controller (#2) Oct 6 22:39:03 mythtv kernel: usb.c: new USB bus registered, assigned bus number 2 Oct 6 22:39:03 mythtv kernel: hub.c: USB hub found Oct 6 22:39:03 mythtv kernel: hub.c: 3 ports detected Oct 6 22:39:03 mythtv kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled Oct 6 22:39:03 mythtv kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A Oct 6 22:39:03 mythtv kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.23. Oct 6 22:39:03 mythtv kernel: eth0: forcedeth.c: subsystem: 01297:f541 bound to 00:04.0 Oct 6 22:39:03 mythtv kernel: Linux agpgart interface v0.99 (c) Jeff Hartmann Oct 6 22:39:03 mythtv kernel: agpgart: Maximum main memory to use for agp memory: 176M Oct 6 22:39:03 mythtv kernel: agpgart: Detected NVIDIA nForce2 chipset Oct 6 22:39:03 mythtv kernel: agpgart: AGP aperture is 64M @ 0xd0000000 Oct 6 22:39:03 mythtv kernel: intel8x0: clocking to 47459 Oct 6 22:39:03 mythtv kernel: SGI XFS with realtime, no debug enabled Oct 6 22:39:03 mythtv kernel: SGI XFS Quota Management subsystem Oct 6 22:39:03 mythtv kernel: NTFS driver v1.1.22 [Flags: R/W MODULE] Oct 6 22:39:03 mythtv kernel: EFS: 1.0a - http://aeschi.ch.eu.org/efs/ Oct 6 22:39:03 mythtv kernel: ttyS1: LSR safety check engaged! Oct 6 22:39:03 mythtv kernel: ttyS1: LSR safety check engaged! Oct 6 22:39:03 mythtv kernel: kjournald starting. Commit interval 5 seconds Oct 6 22:39:03 mythtv kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,4), internal journal Oct 6 22:39:03 mythtv kernel: EXT3-fs: mounted filesystem with ordered data mode. Oct 6 22:39:03 mythtv kernel: blk: queue c0316080, I/O limit 4095Mb (mask 0xffffffff) Oct 6 22:39:06 mythtv kernel: Linux video capture interface: v1.00 Oct 6 22:39:06 mythtv kernel: i2c-core.o: i2c core module version 2.6.1 (20010830) Oct 6 22:39:06 mythtv kernel: i2c-algo-bit.o: i2c bit algorithm module Oct 6 22:39:06 mythtv kernel: ivtv: version 0.1.9 (0.1.10pre1) loading Oct 6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #0 Oct 6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #1 Oct 6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #2 Oct 6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #3 Oct 6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #4 Oct 6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #5 Oct 6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #6 Oct 6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #7 Oct 6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #8 Oct 6 22:39:06 mythtv kernel: ivtv: SGarray_size = 420, DSGarray_size = 16 Oct 6 22:39:06 mythtv kernel: ivtv: Found an iTVC16 based chip Oct 6 22:39:06 mythtv kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 Oct 6 22:39:06 mythtv kernel: saa7114.c: starting probe for adapter ivtv i2c driver #0 (0x10005) Oct 6 22:39:06 mythtv kernel: saa7114.c: detecting saa7114 client on address 0x42 Oct 6 22:39:06 mythtv kernel: saa7115.c: writing init values Oct 6 22:39:08 mythtv kernel: status: (1E) 0x08, (1F) 0xc0 Oct 6 22:39:08 mythtv kernel: msp34xx: init: chip=MSP3415G-B8, has NICAM support Oct 6 22:39:08 mythtv kernel: msp3410: daemon started Oct 6 22:39:11 mythtv kernel: ivtv: Encoder revision: 0x02040011 Oct 6 22:39:11 mythtv kernel: tuner: type set to 18 (Temic PAL_I (4066 FY5)) by ivtv i2c driver #0 Oct 6 22:39:11 mythtv kernel: ivtv: Registered v4l2 device, minor 0 Oct 6 22:39:11 mythtv kernel: ivtv: Registered v4l2 device, minor 32 Oct 6 22:39:11 mythtv kernel: ivtv: Registered v4l2 device, minor 224 Oct 6 22:39:11 mythtv kernel: ivtv: Registered v4l2 device, minor 24 Oct 6 22:39:11 mythtv kernel: ivtv: loaded Oct 6 22:39:11 mythtv kernel: lirc_dev: IR Remote Control driver registered, at major 61 Oct 6 22:39:11 mythtv kernel: bttv: driver version 0.9.15 loaded Oct 6 22:39:11 mythtv kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture Oct 6 22:39:11 mythtv kernel: lirc_i2c: chip found @ 0x18 (Hauppauge IR) Oct 6 22:39:11 mythtv kernel: lirc_dev: lirc_register_plugin:sample_rate: 10 Oct 6 22:39:11 mythtv kernel: saa7115[0]: decoder set size Oct 6 22:39:11 mythtv kernel: Setting full PAL width Oct 6 22:39:11 mythtv kernel: Vsrc: 576, Vscy: 0x004cc Oct 6 22:39:16 mythtv kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) with the addition of this after crashing Code: Oct 6 22:39:16 mythtv kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) Oct 6 22:52:41 mythtv kernel: saa7115[0]: decoder set size Oct 6 22:52:41 mythtv kernel: Hpsc: 0x00001, Hfsc: 0x00600 Oct 6 22:52:41 mythtv kernel: Vsrc: 576, Vscy: 0x004cc Oct 6 22:52:43 mythtv kernel: NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6111 Tue Jul 27 07:55:38 PDT 2004 similarly with syslog. Before Code: Oct 6 22:30:02 mythtv /USR/SBIN/CRON[940]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck) Oct 6 22:35:01 mythtv /USR/SBIN/CRON[948]: (root) CMD (nice -n 19 /usr/local/bin/mythlink.sh) Oct 6 22:37:25 mythtv init: Switching to runlevel: 6 Oct 6 22:37:31 mythtv kernel: Kernel logging (proc) stopped. Oct 6 22:37:31 mythtv kernel: Kernel log daemon terminating. Oct 6 22:37:31 mythtv exiting on signal 15 Oct 6 22:39:03 mythtv syslogd 1.4.1#10: restart. Oct 6 22:39:03 mythtv kernel: klogd 1.4.1#10, log source = /proc/kmsg started. Oct 6 22:39:03 mythtv kernel: Inspecting /boot/System.map-2.4.25-chw Oct 6 22:39:03 mythtv kernel: Loaded 18648 symbols from /boot/System.map-2.4.25-chw. Oct 6 22:39:03 mythtv kernel: Symbols match kernel version 2.4.25. Oct 6 22:39:03 mythtv kernel: Loaded 1357 symbols from 29 modules. Oct 6 22:39:03 mythtv kernel: Linux version 2.4.25-chw (root@km_dev.mysettopbox.tv) (gcc version 3.3.2 20030812 (Debian prerelease)) #1 Sat Apr 10 15:46:31 PDT 2004 Oct 6 22:39:03 mythtv kernel: BIOS-provided physical RAM map: Oct 6 22:39:03 mythtv kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) Oct 6 22:39:03 mythtv kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Oct 6 22:39:03 mythtv kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Oct 6 22:39:03 mythtv kernel: BIOS-e820: 0000000000100000 - 000000000dff0000 (usable) Oct 6 22:39:03 mythtv kernel: BIOS-e820: 000000000dff0000 - 000000000dff3000 (ACPI NVS) Oct 6 22:39:03 mythtv kernel: BIOS-e820: 000000000dff3000 - 000000000e000000 (ACPI data) Oct 6 22:39:03 mythtv kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Oct 6 22:39:03 mythtv kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Oct 6 22:39:03 mythtv kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Oct 6 22:39:03 mythtv kernel: 0MB HIGHMEM available. Oct 6 22:39:03 mythtv kernel: 223MB LOWMEM available. Oct 6 22:39:03 mythtv kernel: On node 0 totalpages: 57328 Oct 6 22:39:03 mythtv kernel: zone(0): 4096 pages. Oct 6 22:39:03 mythtv kernel: zone(1): 53232 pages. Oct 6 22:39:03 mythtv kernel: zone(2): 0 pages. Oct 6 22:39:03 mythtv kernel: Kernel command line: auto BOOT_IMAGE=Linux ro root=301 hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi hdg=scsi hdh=scsi apm=power-off nomce Oct 6 22:39:03 mythtv kernel: ide_setup: hda=scsi Oct 6 22:39:03 mythtv kernel: ide_setup: hdb=scsi Oct 6 22:39:03 mythtv kernel: ide_setup: hdc=scsi Oct 6 22:39:03 mythtv kernel: ide_setup: hdd=scsi Oct 6 22:39:03 mythtv kernel: ide_setup: hde=scsi Oct 6 22:39:03 mythtv kernel: ide_setup: hdf=scsi Oct 6 22:39:03 mythtv kernel: ide_setup: hdg=scsi Oct 6 22:39:03 mythtv kernel: ide_setup: hdh=scsi Oct 6 22:39:03 mythtv kernel: Initializing CPU#0 Oct 6 22:39:03 mythtv kernel: Detected 1830.036 MHz processor. Oct 6 22:39:03 mythtv kernel: Console: colour VGA+ 80x25 Oct 6 22:39:03 mythtv kernel: Calibrating delay loop... 3643.80 BogoMIPS Oct 6 22:39:03 mythtv kernel: Memory: 223820k/229312k available (1363k kernel code, 5104k reserved, 490k data, 116k init, 0k highmem) Oct 6 22:39:03 mythtv kernel: Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Oct 6 22:39:03 mythtv kernel: Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Oct 6 22:39:03 mythtv kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes) Oct 6 22:39:03 mythtv kernel: Buffer cache hash table entries: 16384 (order: 4, 65536 bytes) Oct 6 22:39:03 mythtv kernel: Page-cache hash table entries: 65536 (order: 6, 262144 bytes) Oct 6 22:39:03 mythtv kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Oct 6 22:39:03 mythtv kernel: CPU: L2 Cache: 512K (64 bytes/line) Oct 6 22:39:03 mythtv kernel: CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000 Oct 6 22:39:03 mythtv kernel: CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000 Oct 6 22:39:03 mythtv kernel: CPU: AMD Athlon(tm) XP 2500+ stepping 00 Oct 6 22:39:03 mythtv kernel: Enabling fast FPU save and restore... done. Oct 6 22:39:03 mythtv kernel: Enabling unmasked SIMD FPU exception support... done. Oct 6 22:39:03 mythtv kernel: Checking 'hlt' instruction... OK. Oct 6 22:39:03 mythtv kernel: POSIX conformance testing by UNIFIX Oct 6 22:39:03 mythtv kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) Oct 6 22:39:03 mythtv kernel: mtrr: detected mtrr type: Intel Oct 6 22:39:03 mythtv kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb760, last bus=2 Oct 6 22:39:03 mythtv kernel: PCI: Using configuration type 1 Oct 6 22:39:03 mythtv kernel: PCI: Probing PCI hardware Oct 6 22:39:03 mythtv kernel: PCI: Probing PCI hardware (bus 00) Oct 6 22:39:03 mythtv kernel: PCI: Using IRQ router default [10de/01e0] at 00:00.0 Oct 6 22:39:03 mythtv kernel: isapnp: Scanning for PnP cards... Oct 6 22:39:03 mythtv kernel: isapnp: No Plug & Play device found Oct 6 22:39:03 mythtv kernel: Linux NET4.0 for Linux 2.4 Oct 6 22:39:03 mythtv kernel: Based upon Swansea University Computer Society NET3.039 Oct 6 22:39:03 mythtv kernel: Initializing RT netlink socket Oct 6 22:39:03 mythtv kernel: Starting kswapd Oct 6 22:39:03 mythtv kernel: VFS: Disk quotas vdquot_6.5.1 Oct 6 22:39:03 mythtv kernel: pty: 256 Unix98 ptys configured Oct 6 22:39:03 mythtv kernel: FDC 0 is a post-1991 82077 Oct 6 22:39:03 mythtv kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Oct 6 22:39:03 mythtv kernel: loop: loaded (max 8 devices) Oct 6 22:39:03 mythtv kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 Oct 6 22:39:03 mythtv kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Oct 6 22:39:03 mythtv kernel: NFORCE2: IDE controller at PCI slot 00:09.0 Oct 6 22:39:03 mythtv kernel: NFORCE2: chipset revision 162 Oct 6 22:39:03 mythtv kernel: NFORCE2: not 100%% native mode: will probe irqs later Oct 6 22:39:03 mythtv kernel: AMD_IDE: Bios didn't set cable bits corectly. Enabling workaround. Oct 6 22:39:03 mythtv kernel: AMD_IDE: nVidia Corporation nForce2 IDE (rev a2) UDMA100 controller on pci00:09.0 Oct 6 22:39:03 mythtv kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA Oct 6 22:39:03 mythtv kernel: ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Oct 6 22:39:03 mythtv kernel: hda: ST3160023A, ATA DISK drive Oct 6 22:39:03 mythtv kernel: hdc: SONY DVD RW DRU-500A, ATAPI CD/DVD-ROM drive Oct 6 22:39:03 mythtv kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Oct 6 22:39:03 mythtv kernel: ide1 at 0x170-0x177,0x376 on irq 15 Oct 6 22:39:03 mythtv kernel: hda: attached ide-disk driver. Oct 6 22:39:03 mythtv kernel: hda: host protected area => 1 Oct 6 22:39:03 mythtv kernel: hda: 312581808 sectors (160042 MB) w/8192KiB Cache, CHS=19457/255/63 Oct 6 22:39:03 mythtv kernel: ide-cd: passing drive hdc to ide-scsi emulation. Oct 6 22:39:03 mythtv kernel: hdc: attached ide-scsi driver. Oct 6 22:39:03 mythtv kernel: Partition check: Oct 6 22:39:03 mythtv kernel: hda: hda1 hda2 hda3 hda4 Oct 6 22:39:03 mythtv kernel: ide: late registration of driver. Oct 6 22:39:03 mythtv kernel: Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found Oct 6 22:39:03 mythtv kernel: Highpoint HPT370 Softwareraid driver for linux version 0.02 Oct 6 22:39:03 mythtv kernel: Guestimating sector 312560384 for superblock Oct 6 22:39:03 mythtv kernel: driver for Silicon Image(tm) Medley(tm) hardware version 0.0.1: No raid array found Oct 6 22:39:03 mythtv kernel: SCSI subsystem driver Revision: 1.00 Oct 6 22:39:03 mythtv kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices Oct 6 22:39:03 mythtv kernel: Vendor: SONY Model: DVD RW DRU-500A Rev: 2.0f Oct 6 22:39:03 mythtv kernel: Type: CD-ROM ANSI SCSI revision: 02 Oct 6 22:39:03 mythtv kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Oct 6 22:39:03 mythtv kernel: sr0: scsi3-mmc drive: 31x/31x writer cd/rw xa/form2 cdda tray Oct 6 22:39:03 mythtv kernel: Uniform CD-ROM driver Revision: 3.12 Oct 6 22:39:03 mythtv kernel: Initializing Cryptographic API Oct 6 22:39:03 mythtv kernel: NET4: Linux TCP/IP 1.0 for NET4.0 Oct 6 22:39:03 mythtv kernel: IP Protocols: ICMP, UDP, TCP, IGMP Oct 6 22:39:03 mythtv kernel: IP: routing cache hash table of 2048 buckets, 16Kbytes Oct 6 22:39:03 mythtv kernel: TCP: Hash tables configured (established 16384 bind 32768) Oct 6 22:39:03 mythtv kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Oct 6 22:39:03 mythtv kernel: RAMDISK: Compressed image found at block 0 Oct 6 22:39:03 mythtv kernel: Freeing initrd memory: 150k freed Oct 6 22:39:03 mythtv kernel: VFS: Mounted root (ext2 filesystem). Oct 6 22:39:03 mythtv kernel: Journalled Block Device driver loaded Oct 6 22:39:03 mythtv kernel: kjournald starting. Commit interval 5 seconds Oct 6 22:39:03 mythtv kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal Oct 6 22:39:03 mythtv kernel: EXT3-fs: mounted filesystem with ordered data mode. Oct 6 22:39:03 mythtv kernel: Freeing unused kernel memory: 116k freed Oct 6 22:39:03 mythtv kernel: Adding Swap: 835372k swap-space (priority -1) Oct 6 22:39:03 mythtv kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal Oct 6 22:39:03 mythtv kernel: Real Time Clock Driver v1.10f Oct 6 22:39:03 mythtv kernel: usb.c: registered new driver usbdevfs Oct 6 22:39:03 mythtv kernel: usb.c: registered new driver hub Oct 6 22:39:03 mythtv kernel: PCI: Setting latency timer of device 00:02.0 to 64 Oct 6 22:39:03 mythtv kernel: usb-ohci.c: USB OHCI at membase 0xce8ae000, IRQ 11 Oct 6 22:39:03 mythtv kernel: usb-ohci.c: usb-00:02.0, nVidia Corporation nForce2 USB Controller Oct 6 22:39:03 mythtv kernel: usb.c: new USB bus registered, assigned bus number 1 Oct 6 22:39:03 mythtv kernel: hub.c: USB hub found Oct 6 22:39:03 mythtv kernel: hub.c: 3 ports detected Oct 6 22:39:03 mythtv kernel: PCI: Setting latency timer of device 00:02.1 to 64 Oct 6 22:39:03 mythtv kernel: usb-ohci.c: USB OHCI at membase 0xce8b0000, IRQ 3 Oct 6 22:39:03 mythtv kernel: usb-ohci.c: usb-00:02.1, nVidia Corporation nForce2 USB Controller (#2) Oct 6 22:39:03 mythtv kernel: usb.c: new USB bus registered, assigned bus number 2 Oct 6 22:39:03 mythtv kernel: hub.c: USB hub found Oct 6 22:39:03 mythtv kernel: hub.c: 3 ports detected Oct 6 22:39:03 mythtv kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled Oct 6 22:39:03 mythtv kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A Oct 6 22:39:03 mythtv kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.23. Oct 6 22:39:03 mythtv kernel: PCI: Setting latency timer of device 00:04.0 to 64 Oct 6 22:39:03 mythtv kernel: eth0: forcedeth.c: subsystem: 01297:f541 bound to 00:04.0 Oct 6 22:39:03 mythtv kernel: Linux agpgart interface v0.99 (c) Jeff Hartmann Oct 6 22:39:03 mythtv kernel: agpgart: Maximum main memory to use for agp memory: 176M Oct 6 22:39:03 mythtv kernel: agpgart: Detected NVIDIA nForce2 chipset Oct 6 22:39:03 mythtv kernel: agpgart: AGP aperture is 64M @ 0xd0000000 Oct 6 22:39:03 mythtv kernel: PCI: Setting latency timer of device 00:06.0 to 64 Oct 6 22:39:03 mythtv kernel: intel8x0: clocking to 47459 Oct 6 22:39:03 mythtv kernel: SGI XFS with realtime, no debug enabled Oct 6 22:39:03 mythtv kernel: SGI XFS Quota Management subsystem Oct 6 22:39:03 mythtv kernel: NTFS driver v1.1.22 [Flags: R/W MODULE] Oct 6 22:39:03 mythtv kernel: EFS: 1.0a - http://aeschi.ch.eu.org/efs/ Oct 6 22:39:03 mythtv kernel: ttyS1: LSR safety check engaged! Oct 6 22:39:03 mythtv kernel: ttyS1: LSR safety check engaged! Oct 6 22:39:03 mythtv kernel: kjournald starting. Commit interval 5 seconds Oct 6 22:39:03 mythtv kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,4), internal journal Oct 6 22:39:03 mythtv kernel: EXT3-fs: mounted filesystem with ordered data mode. Oct 6 22:39:03 mythtv kernel: smbfs: mount_data version 1919251317 is not supported Oct 6 22:39:03 mythtv kernel: blk: queue c0316080, I/O limit 4095Mb (mask 0xffffffff) Oct 6 22:39:06 mythtv kernel: Linux video capture interface: v1.00 Oct 6 22:39:06 mythtv kernel: i2c-core.o: i2c core module version 2.6.1 (20010830) Oct 6 22:39:06 mythtv kernel: i2c-algo-bit.o: i2c bit algorithm module Oct 6 22:39:06 mythtv kernel: i2c-core.o: driver i2c TV tuner driver registered. Oct 6 22:39:06 mythtv kernel: i2c-core.o: driver saa7115 registered. Oct 6 22:39:06 mythtv kernel: i2c-core.o: driver i2c msp3400 driver registered. Oct 6 22:39:06 mythtv kernel: ivtv: version 0.1.9 (0.1.10pre1) loading Oct 6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #0 Oct 6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #1 Oct 6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #2 Oct 6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #3 Oct 6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #4 Oct 6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #5 Oct 6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #6 Oct 6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #7 Oct 6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #8 Oct 6 22:39:06 mythtv kernel: ivtv: SGarray_size = 420, DSGarray_size = 16 Oct 6 22:39:06 mythtv kernel: ivtv: Found an iTVC16 based chip Oct 6 22:39:06 mythtv kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 Oct 6 22:39:06 mythtv kernel: i2c-core.o: client [(tuner unset)] registered to adapter [ivtv i2c driver #0](pos. 0). Oct 6 22:39:06 mythtv kernel: saa7114.c: starting probe for adapter ivtv i2c driver #0 (0x10005) Oct 6 22:39:06 mythtv kernel: saa7114.c: detecting saa7114 client on address 0x42 Oct 6 22:39:06 mythtv kernel: saa7115.c: writing init values Oct 6 22:39:08 mythtv kernel: status: (1E) 0x08, (1F) 0xc0 Oct 6 22:39:08 mythtv kernel: i2c-core.o: client [saa7115[0]] registered to adapter [ivtv i2c driver #0](pos. 1). Oct 6 22:39:08 mythtv kernel: msp34xx: init: chip=MSP3415G-B8, has NICAM support Oct 6 22:39:08 mythtv kernel: msp3410: daemon started Oct 6 22:39:08 mythtv kernel: i2c-core.o: client [MSP3415G-B8] registered to adapter [ivtv i2c driver #0](pos. 2). Oct 6 22:39:08 mythtv kernel: i2c-core.o: adapter ivtv i2c driver #0 registered as adapter 0. Oct 6 22:39:11 mythtv kernel: ivtv: Encoder revision: 0x02040011 Oct 6 22:39:11 mythtv kernel: tuner: type set to 18 (Temic PAL_I (4066 FY5)) by ivtv i2c driver #0 Oct 6 22:39:11 mythtv kernel: ivtv: Registered v4l2 device, minor 0 Oct 6 22:39:11 mythtv kernel: ivtv: Registered v4l2 device, minor 32 Oct 6 22:39:11 mythtv kernel: ivtv: Registered v4l2 device, minor 224 Oct 6 22:39:11 mythtv kernel: ivtv: Registered v4l2 device, minor 24 Oct 6 22:39:11 mythtv kernel: ivtv: loaded Oct 6 22:39:11 mythtv kernel: lirc_dev: IR Remote Control driver registered, at major 61 Oct 6 22:39:11 mythtv kernel: bttv: driver version 0.9.15 loaded Oct 6 22:39:11 mythtv kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture Oct 6 22:39:11 mythtv insmod: /lib/modules/2.4.25-chw/kernel/drivers/media/video/bttv.o: init_module: No such device Oct 6 22:39:11 mythtv insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg Oct 6 22:39:11 mythtv insmod: /lib/modules/2.4.25-chw/kernel/drivers/media/video/bttv.o: insmod bttv failed Oct 6 22:39:11 mythtv modprobe: modprobe: Can't locate module rivatv Oct 6 22:39:11 mythtv kernel: i2c-core.o: driver i2c ir driver registered. Oct 6 22:39:11 mythtv kernel: lirc_i2c: chip found @ 0x18 (Hauppauge IR) Oct 6 22:39:11 mythtv kernel: i2c-core.o: client [Hauppauge IR] registered to adapter [ivtv i2c driver #0](pos. 3). Oct 6 22:39:11 mythtv kernel: lirc_dev: lirc_register_plugin:sample_rate: 10 Oct 6 22:39:11 mythtv kernel: saa7115[0]: decoder set norm PAL Oct 6 22:39:11 mythtv kernel: saa7115[0] set audio: 0x02 Oct 6 22:39:11 mythtv kernel: saa7115[0]: decoder set input (0) Oct 6 22:39:11 mythtv kernel: saa7115[0]: now setting Composite input Oct 6 22:39:11 mythtv kernel: saa7115[0]: decoder set size Oct 6 22:39:11 mythtv kernel: Setting full PAL width Oct 6 22:39:11 mythtv kernel: Vsrc: 576, Vscy: 0x004cc Oct 6 22:39:14 mythtv /usr/sbin/cron[591]: (CRON) INFO (pidfile fd = 3) Oct 6 22:39:14 mythtv /usr/sbin/cron[592]: (CRON) STARTUP (fork ok) Oct 6 22:39:14 mythtv /usr/sbin/cron[592]: (CRON) INFO (Running @reboot jobs) Oct 6 22:39:14 mythtv kernel: saa7115[0]: decoder set norm PAL Oct 6 22:39:15 mythtv kernel: saa7115[0] set audio: 0x02 Oct 6 22:39:15 mythtv kernel: saa7115[0]: decoder set input (4) Oct 6 22:39:15 mythtv kernel: saa7115[0]: now setting Composite input Oct 6 22:39:15 mythtv kernel: saa7115[0]: decoder set norm PAL Oct 6 22:39:15 mythtv kernel: saa7115[0] set audio: 0x02 Oct 6 22:39:15 mythtv kernel: saa7115[0]: decoder set picture bright=128 contrast=55 saturation=64 hue=0 Oct 6 22:39:15 mythtv kernel: saa7115[0]: decoder set picture bright=128 contrast=55 saturation=44 hue=0 Oct 6 22:39:15 mythtv kernel: saa7115[0]: decoder set picture bright=140 contrast=55 saturation=44 hue=0 Oct 6 22:39:15 mythtv kernel: saa7115[0]: decoder set picture bright=140 contrast=55 saturation=44 hue=-25 Oct 6 22:39:16 mythtv kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) Oct 6 22:39:22 mythtv modprobe: modprobe: Can't locate module char-major-81-2 Oct 6 22:40:01 mythtv /USR/SBIN/CRON[678]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck) and this was added after Code: Oct 6 22:39:22 mythtv modprobe: modprobe: Can't locate module char-major-81-2
Oct 6 22:40:01 mythtv /USR/SBIN/CRON[678]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck) Oct 6 22:50:01 mythtv /USR/SBIN/CRON[700]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck) Oct 6 22:52:41 mythtv kernel: saa7115[0]: decoder set picture bright=140 contrast=55 saturation=44 hue=-25 Oct 6 22:52:41 mythtv last message repeated 3 times Oct 6 22:52:41 mythtv kernel: saa7115[0]: decoder set size Oct 6 22:52:41 mythtv kernel: Hpsc: 0x00001, Hfsc: 0x00600 Oct 6 22:52:41 mythtv kernel: Vsrc: 576, Vscy: 0x004cc Oct 6 22:52:41 mythtv kernel: saa7115[0]: decoder disable output Oct 6 22:52:41 mythtv kernel: saa7115[0]: decoder enable output Oct 6 22:52:43 mythtv kernel: NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6111 Tue Jul 27 07:55:38 PDT 2004 Oct 6 22:52:43 mythtv insmod: Warning: loading /lib/modules/2.4.25-chw/kernel/drivers/video/nvidia.o will taint the kernel: non-GPL license - NVIDIA Oct 6 22:52:43 mythtv insmod: See http://www.tux.org/lkml/#export-tainted for information about tainted modules Oct 6 22:52:43 mythtv insmod: Module nvidia loaded, with warnings After running killall mythfrontend there was nothing new added. A huge post I know and I hope I haven't broken any etiquette rules in doing so. thanks Mark |
|
| Author: | turpie [ Wed Oct 06, 2004 5:44 pm ] |
| Post subject: | |
How do I tell if I'm using xvmc? If I run "apt-show-versions | grep myth" The mythtv package installed is mythtv-i686-lirc 0.16-1. I also tried changing my XF86Config-4 file back to the original one which used the "nv" driver instead of the "nvidia" driver and the problem still occurs. Mark, In what way do you think our problems are different? When I try to watch a recording, the screen blanks and I can't use ESC to get back to a menu, or even ALT-F1 to get to the console. If I kill the frontend via a Putty session the XFree86 process consumes 99% of the processor. The only way to free it up is to reboot. Could you try quitting the frontend, open an xterm, and run this command "mythfrontend > errors.log 2>&1". This will log any errors the frontend process generates. Then post the resulting errors.log |
|
| Author: | sootzoo [ Wed Oct 06, 2004 7:12 pm ] |
| Post subject: | |
Here are a few interesting highlights: Code: Oct 6 22:39:11 mythtv insmod: /lib/modules/2.4.25-chw/kernel/drivers/media/video/bttv.o: init_module: No such device Oct 6 22:39:11 mythtv insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg Oct 6 22:39:11 mythtv insmod: /lib/modules/2.4.25-chw/kernel/drivers/media/video/bttv.o: insmod bttv failed Oct 6 22:39:11 mythtv modprobe: modprobe: Can't locate module rivatv And also this: Code: Oct 6 22:39:22 mythtv modprobe: modprobe: Can't locate module char-major-81-2
Your module settings are probably wrong. From what I've seen they can get very picky about the order they're loaded in, etc. Can you see the card in lspci or /proc/pci ? Are the modules loaded when you do an lsmod? |
|
| Author: | sootzoo [ Wed Oct 06, 2004 7:15 pm ] |
| Post subject: | |
Also, if you have /etc/modutils/bttv (or if the module load options are set elsewhere) this might be helpful. Good luck! |
|
| Author: | turpie [ Wed Oct 06, 2004 7:41 pm ] |
| Post subject: | |
Mark, Are you able to schedule a recording, then watch the completed recording on your Windows machine? I can't test this myself as my mythtv box is currently at work where I don't have an antenna connection. If the recording works, then the bttv modules shouldn't matter. I think it must be something to do with the way mythtv displays recorded tv, as it happen with both Live and prerecorded tv. Paul T. |
|
| Author: | tjc [ Wed Oct 06, 2004 9:17 pm ] |
| Post subject: | |
turpie wrote: I seem to be having the same problem as markm.
When I tried running the FE from an xterm I got the following: Quote: Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". ... Could it be something to do with the nvidia drivers that we are both using? Search for a post by me on how to fix the GLX thing. The Nvidia installer leaves an extra bogus libnvidia-tls around that you have to clean up. Once you've done that, uncomment the line in your XF86Config-4. |
|
| Author: | Xsecrets [ Wed Oct 06, 2004 9:18 pm ] |
| Post subject: | |
ok next time when you are trying to kill the frontend from putty use killall -9 mythfrontend if it doesn't die then it's pretty messed up. the other thing that I see in there is something about the rivatv what is that all about did you try to load some different drivers or something? |
|
| Page 1 of 2 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|