View unanswered posts    View active topics

All times are UTC - 6 hours





Post new topic Reply to topic  [ 4 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
PostPosted: Thu Mar 31, 2005 1:09 pm 
Offline
Joined: Mon Dec 06, 2004 3:20 pm
Posts: 55
Location: Sacramento, Ca
I recently put together a second mythtbox with the intention of using it as a frontend end only. I put a Kworld BTTV capture card in it to see if I could get the remote to work. Turns out the Kworld card and remote work very well.

So now I am thinking I would not mind using the Kworld box to record also, this way I have 2 tuners (but in different rooms) to record with. So both my mythboxes have full installs of mythtv (not just frontend on the kworld box)

So I am thinking about putting the Kworld box in the bedroom with my main pvr250 box in the living room with the enternainment center. I only intend on using the Bedroom Kworld box when the wife and kids run me out of the living room. So it will be turned off when not actively in use.

Here is my question: Can I set these two Mythboxes up to share their TV directories? In other words, when I boot up the Kworld box in the bedroom, I would like the recorded files on the Kworld box AND the recordings on the PVR250 box downstairds both to show up (using nfs to share the directories over my netowrk).

I see that NFS shares and mounts directories on different linux boxes on the network, but I am unsure about the database stuff in Mythtv. Is this something the database stuff can handle or do I need to put the two tuners in one box and run just a frontend upstairs in the bedroom?

_________________
SIS K7S5A mb R4V5
Amd 2000 + cpu Atheros chipset wireless NIC
GF4 ti4200 Video onboard ALSA sound card
768 meg sdram partial install on Nuv2disc
120 g maxtor HD
PVR 250 Video Capture card


Top
 Profile  
 
 Post subject:
PostPosted: Thu Mar 31, 2005 4:22 pm 
Offline
Joined: Mon Nov 17, 2003 8:59 am
Posts: 206
Location: Michigan
You don't set up nfs shares in a case like that, you configure as master be/ slave be. I can't tell you how to do it, but maybe that gives you a little more info to use in search boxes on the myth sites.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Mar 31, 2005 4:35 pm 
Offline
Joined: Fri Sep 19, 2003 7:05 pm
Posts: 5088
Location: Fontana, Ca
http://mysettopbox.tv/linhes.html

_________________
cesman

When the source is open, the possibilities are endless!


Top
 Profile  
 
 Post subject:
PostPosted: Thu Mar 31, 2005 5:51 pm 
Offline
Joined: Mon Dec 06, 2004 3:20 pm
Posts: 55
Location: Sacramento, Ca
Thanks Cesman

That looks like exactly the info I was looking for. I wasn't sure if I explained myself clearly or not.

I am not sure my SBE will be able to record video to the MBE via my 54g wireless setup. Currenty my daughters winbox can stream video from my myth MBE, so maybe my new SBE mythbox will work well too. I can always run some cat5 if needed.

Thanks again.

_________________
SIS K7S5A mb R4V5
Amd 2000 + cpu Atheros chipset wireless NIC
GF4 ti4200 Video onboard ALSA sound card
768 meg sdram partial install on Nuv2disc
120 g maxtor HD
PVR 250 Video Capture card


Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 


All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 29 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu