| LinHES Forums http://forum.linhes.org/ |
|
| Widescreen HD playback crops about 30% off of the sides-RA22 http://forum.linhes.org/viewtopic.php?f=6&t=6690 |
Page 1 of 1 |
| Author: | hotspoons [ Sun Oct 30, 2005 11:16 pm ] |
| Post subject: | Widescreen HD playback crops about 30% off of the sides-RA22 |
I just got my new master backend/frontend loaded today (Athlon 64 3200 venice, 1 gig of RAM, geforce 5200 ultra, DCT6200/firewire, etc.), and when I watch anything that is HD widescreen, the sides of the video are cropped off about 15% to the left and right of the screen. I am using a 33" Princeton SVGA monitor (800x600) as my display, and no matter what I do, I can not get widescreen HD video to fit on the screen at all. Cycling through the various aspect ratios and overrides with the W key will never fit the entire image on the screen (it is always cropped on the sides), and using the manual zoom mode produces more interesting issues, like when zooming out, instead of shrinking the entire video image, it just does a growing 4 sided letterbox portal that moves in relation to the video image. It seems like it is shrinking 1920x1080 video to fit on a 1024x768 screen, and I am looking at that shrunken image through an 800x600 portal. I have every setting overridden with 800x600 any place I could find it in the various settings for myth, but nothing seems to happen. I had used it at 1024x768 with all default settings before I reduced the resolution to fit on my SVGA monitor, but I couldn't think of a setting, except maybe one buried deep in the database that would have stuck or affected this. Any ideas? Thanks. -Rich |
|
| Author: | cesman [ Sun Oct 30, 2005 11:50 pm ] |
| Post subject: | |
You can use 'W' to cycle thru and correct this.... |
|
| Author: | hotspoons [ Mon Oct 31, 2005 2:25 pm ] |
| Post subject: | |
cesman wrote: You can use 'W' to cycle thru and correct this....
That's what I meant by "Cycling through the various aspect ratios and overrides with the W key" and it didn't fix the cropping, neither did zooming manually. It seems its drawing the video to a frame larger than 800x600, but my viewport is only 800x600...akin to sticking a 4x6 picture into a 3x5 picture frame. -Rich |
|
| Author: | jakep_82 [ Mon Oct 31, 2005 5:54 pm ] |
| Post subject: | |
Have you edited your XFree86-4 file? |
|
| Author: | hotspoons [ Tue Nov 01, 2005 12:56 am ] |
| Post subject: | |
jakep_82 wrote: Have you edited your XFree86-4 file?
Yes I did...I had to take out any line that my SVGA monitor wouldn't handle (anything > 800x600x60Hz) - Code: InputDevice "Keyboard0" "CoreKeyboard"
# PS/2 Mouse using /dev/input/mice in Kernel 2.6 # Serial Mouse not detected InputDevice "USB Mouse" "CorePointer" EndSection Section "ServerFlags" Option "AllowMouseOpenFail" "true" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" ModulePath "/usr/X11R6/lib/modules" FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/misc" FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/75dpi" FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi" FontPath "/usr/X11R6/lib/X11/fonts/Speedo" FontPath "/usr/X11R6/lib/X11/fonts/PEX" # Additional fonts: Locale, Gimp, TTF... FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" # FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi" # FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi" # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig! FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/share/fonts/ttf/western" FontPath "/usr/share/fonts/ttf/decoratives" FontPath "/usr/share/fonts/truetype" FontPath "/usr/share/fonts/truetype/openoffice" FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera" FontPath "/usr/share/fonts/latex-ttf-fonts" FontPath "/usr/X11R6/lib/X11/fonts/defoma/CID" FontPath "/usr/X11R6/lib/X11/fonts/defoma/TrueType" EndSection Section "Module" Load "ddc" # ddc probing of monitor # Load "GLcore" Load "dbe" # Load "dri" Load "extmod" Load "glx" Load "bitmap" # bitmap-fonts Load "speedo" Load "type1" Load "freetype" Load "record" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "CoreKeyboard" Option "XkbRules" "xfree86" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Serial Mouse" Driver "mouse" Option "Protocol" "Microsoft" Option "Device" "/dev/ttyS0" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" EndSection Section "InputDevice" Identifier "PS/2 Mouse" Driver "mouse" Option "Protocol" "auto" Option "ZAxisMapping" "4 5" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" EndSection Section "InputDevice" Identifier "USB Mouse" Driver "mouse" Option "Device" "/dev/input/mice" Option "SendCoreEvents" "true" Option "Protocol" "IMPS/2" Option "ZAxisMapping" "4 5" Option "Buttons" "5" EndSection # Auto-generated by KNOPPIX mkxf86config Section "Monitor" Identifier "Monitor0" Option "DPMS" "true" VendorName "STC" ModelName "STC02ce" HorizSync 30 - 72 # DDC-probed VertRefresh 50 - 85 # DDC-probed # These are the DDC-probed settings reported by your monitor. # 1024x768, 85.0Hz; hfreq=68.68, vfreq=85.00 #ModeLine "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync # 1024x768, 75.0Hz; hfreq=60.02, vfreq=75.03 #ModeLine "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync # 800x600, 85.0Hz; hfreq=53.67, vfreq=85.06 #ModeLine "800x600" 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync # 800x600, 75.0Hz; hfreq=46.88, vfreq=75.00 #ModeLine "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync # 800x600, 60.0Hz; hfreq=37.88, vfreq=60.32 ModeLine "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync # 640x480, 85.0Hz; hfreq=43.27, vfreq=85.01 ModeLine "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync # 640x480, 75.0Hz; hfreq=37.50, vfreq=75.00 ModeLine "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync # 640x480, 60.0Hz; hfreq=31.47, vfreq=59.94 ModeLine "640x480" 25.17 640 648 744 784 480 482 484 509 -hsync -vsync EndSection Section "Device" ### Available Driver options are:- # sw_cursor is needed for some ati and radeon cards #Option "sw_cursor" #Option "hw_cursor" #Option "NoAccel" #Option "ShowCache" #Option "ShadowFB" #Option "UseFBDev" #Option "Rotate" Identifier "Card0" # The following line is auto-generated by KNOPPIX mkxf86config Driver "nvidia" VendorName "All" BoardName "All" # BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultColorDepth 24 SubSection "Display" Depth 1 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 32 Modes "800x600" "640x480" EndSubSection EndSection Section "DRI" Mode 0666 EndSection |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|