LinHES Forums
http://forum.linhes.org/

R26 Upgrade Mythburn Segmentation Fault at line 768
http://forum.linhes.org/viewtopic.php?f=6&t=7209		 Page 1 of 1
Author:  simonf [ Sun Dec 04, 2005 8:33 am ]
Post subject:  R26 Upgrade Mythburn Segmentation Fault at line 768
Hi

Yesterday i spent 8 hours backing all my content to dvd's and then moved up to R26 from R22. at first i got no picture, in watch tv mode, so at 2:30am gave up and went to bed. This morning watch tv mode seems to work and the backend no longer seems to lock up if i tune to a channel which is off air, it used to in R22. :P

The reason for the upgrade was because i wanted to use the mythboxes' frontend, at the present the mythbox lives in the office and i schedule recordings using mythweb. we either watch recordings on the laptop using mplayer or on a dbox2 STB, this will play back DVB-t.nuv files no problems other than the filenames are a bit hard to find for the girlfriend. I just got a plasma tv with a vga input and i thought now was the time to move the box into the living room. after installing R26 the remote on my jetway dvb-t works to a fashion the number butons seem to be the arrows but i think i could manage to edit the lirc file to fix this. :P I will post the lirc file when done.

The problem I am having is with mythburn, i got mythburn to work on R22 by changing the ownership of hdc to www-data and it burned DVDs fine, although other posts since sugest beter ways of getting it to work. I Upgraded to the latest rel of myth burn on cvs and it stoped working with the same fault i am about to describe. Now i am on R26 mythwebburn comes up with

....mythburn.sh line:768 xxxx Segmentation fault nice dvdauthor

sorry cant post exact message as ive not set up a share yet so i can get to the log. I have seen this error described before on this forum but no solution anyone got any ideas ?

Or does anyone know a way of downgrading mythwebburn to the old r22 which worked for me[/b]
Author:  simonf [ Mon Dec 05, 2005 1:19 pm ]
Post subject: 
Hi

got my webmin and samba working

so heres the error ive been getting



Code:
INFO: MPEG version: mpeg2
INFO: TV standard: pal
INFO: Aspect ratio: 4:3
INFO: Resolution: 720x576
INFO: Audio ch 0 format: mp2/2ch, 48khz 20bps
INFO: Audio ch 1 format: mp2/2ch, 48khz 20bps

/myth/mythburn/mythtvburn.sh: line 768:  6547 Segmentation fault      nice dvdauthor -o ${dvddir} -x $myxml
***********************************
MythTV BurnDVD stopped due to error
***********************************
Sent UDP/XML packet to IP 255.255.255.255 and port: 6948


dosnt matter how many titles or size of title wont go :(
Author:  iscraigh [ Mon Dec 05, 2005 4:02 pm ]
Post subject: 
similar problem my error is


.old: No such file or directory
pipe:: Unknown format
rm: cannot remove `.old': No such file or directory
mplex -o /myth/mythburn/temp/1013_20051006200000_20051006203000.nuv -f 8 1013_20051006200000_20051006203000.m2v ffmpeg version 0.4.9-pre1, build 4718, Copyright (c) 2000-2004 Fabrice Bellard built on Oct 18 2005 17:26:48, gcc: 3.3.5 (Debian 1:3.3.5-12)
***********************************
MythTV BurnDVD stopped due to error
***********************************
Sent UDP/XML packet to IP 255.255.255.255 and port: 6948


Command line:nice /myth/mythburn/mythtvburn.sh 'ntsc' 'mythtv-logo.png' 'funky1.mp2' 'yes' 'no' 'yes' 'barbwire.png' 'no' 'no' 'yes' '1013_20051006200000_20051006203000.nuv' 'nocut' > /myth/mythburn/temp/mythburn.log 2>&1 &

Warning at Unknown, line 0:
Unknown(): Your script possibly relies on a session side-effect which existed until PHP 4.2.3. Please be advised that the session extension does not consider global variables as a source of data, unless register_globals is enabled. You can disable this functionality and this warning by setting session.bug_compat_42 or session.bug_compat_warn to off, respectively.



R5a26
Author:  simonf [ Tue Dec 06, 2005 7:14 am ]
Post subject: 
I got past the mplex stage and into the dvdauthor stage.
Author:  simonf [ Wed Dec 21, 2005 4:15 pm ]
Post subject:  Problem solved
The fix for me for this was to
update dvdauthor
and
reload mythburn from cvs

I dont know which fixed it as i did both at once sorry
Author:  nigelpearson [ Sun Jan 08, 2006 4:04 am ]
Post subject: 
Had the same problem today on R5A30:
Code:
INFO: Audio ch 1 format: ac3/2ch, 48khz drc

/myth/mythburn/mythtvburn.sh: line 768: 17230 Segmentation fault      nice dvdauthor -o ${dvddir} -x $myxml


Manually ran the command and found that it got about 85% of the way through the data before it died. Upgraded dvdauthor from the current 0.6.10 to 0.6.11:
Code:
# apt-get install dvdauthor
and it now all is well
Author:  simonf [ Sun Jan 08, 2006 9:59 am ]
Post subject:  R5A30 Definitely Broke
Yep upgraded to R5A30 last night and the segmentation fault came back seems mythweb burn requires latest version of dvdauthor.


My fix for the newbies like me is

log in as root

Code:
apt-get update
apt-get install dvdauthor


now i have to reedit all the scripts again to allow me to turn off tcrequadrent from the web interface :roll:
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/