| LinHES Forums http://forum.linhes.org/ |
|
| EPIA M motherboard + PVR 250 instructions http://forum.linhes.org/viewtopic.php?f=6&t=760 |
Page 1 of 5 |
| Author: | pete-edworthy [ Thu Feb 19, 2004 4:47 am ] |
| Post subject: | EPIA M motherboard + PVR 250 instructions |
I've got R4V2 working with hardware mpeg decoding and I'm planning on posting the instructions, but would like someone with an EPIA M10000 and someone with an EPIA M60000 to test it before I post. This will hopefully save mistakes. First come first served, although please don't ask to be a tester if you don't have a couple of hours to spare as it will delay others getting to play. thanks Pete Oh btw on my EPIA M10000 I can watch live tv at 720x578 with low cpu load and 1024x768 res 
|
|
| Author: | sparky [ Sat Feb 21, 2004 10:55 am ] |
| Post subject: | PVR 350 |
I have a pvr 350 but can't get it to work on the EPIA M10000. Maybe your insturctions can help me? I think it dies on boot when it loads the ivtv drivers.. Sparky |
|
| Author: | upplepop [ Sat Feb 21, 2004 5:49 pm ] |
| Post subject: | |
I have a M10000 and a PVR250 and am having trouble with the installation, so I'm the perfect canidate! I'd be glad to test your instructions. |
|
| Author: | mceachrw [ Tue Feb 24, 2004 12:05 pm ] |
| Post subject: | m6000, pvr250/freestyle and an hour or so a night |
i am about to give up on the diskless frontend concept. i can't keep the backend, which is also my desktop, stable. so, i would like to use my m6000, pvr250/freestyle, 160 gb samsung as a frontend/backend. i will not be using lirc and do not have my dd 5.1 amp setup yet. so i can test all but those things. let me know. rusty |
|
| Author: | rmceacharn [ Tue Feb 24, 2004 1:09 pm ] |
| Post subject: | wrong email address |
in my post above, the email address for mceachrw is wrong and my account is locked. send an email to mceachrw at kingwoodcable dot net if you would like me to test your instructions. |
|
| Author: | jayb [ Fri Mar 12, 2004 3:20 am ] |
| Post subject: | |
Does anyone know if Pete has made these instructions available yet? I would be happy even to have a rough version of these instructions, anything to improve the picture quality on my M1000/PVR250 
|
|
| Author: | pete-edworthy [ Mon Mar 15, 2004 8:07 am ] |
| Post subject: | Still Working the kinks out |
As I've not posted about this for a month I think an update is needed. Sparky and Upplepop have both tried the instructions and sent through amendments as problems were found. The instructions now install for viewing, as far as I know, but I've found a problem with the alsa9 sound, it crashes myth music (I know mythmusic uses oss /dev/dsp, but I've been using the oss compt part of alsa! so I want to sort this first before releaseing them. bye Pete |
|
| Author: | mylesg [ Mon Mar 15, 2004 5:39 pm ] |
| Post subject: | EPIA M motherboard + PVR 250 instructions |
Hi Pete I have an EPIA M10000 & and I am trying various TV cards, WinTV PCI, PVR 250 & PVR350 I have been using FREEPIA with this system previously but managed to get an .ISO of KnoppMyth and i am installing it as I write this message I would be more than happy to carry out some testing if it helps as I am in the process of configuring 3 different systems as PVR's to record from 2 terrestrial feeds and 1 satelite feed The other systems area an ASUS terminator 2 (P4 2.8 +PVR350) & Asus Digimatrix for the sat feed with Livevew TV card (P4 + frame grabber - no encoder), the systems are currently use Windows XP but I would like to move them all to Linux as I would like to be able to configure the 3 systems to eventually connect into one frontend wich would be modded Xbox connected to TV and then to wireless network via Linksys wireless G card (Can use ethernet if wireless is not quick enough as already wired up) Regards Myles |
|
| Author: | jayb [ Thu Mar 25, 2004 12:18 pm ] |
| Post subject: | |
Hi Pete, Have you got any closer to releasing these instructions? Thanks Jay |
|
| Author: | pete-edworthy [ Fri Mar 26, 2004 3:38 am ] |
| Post subject: | update |
hi, sorry, still can't get mythmusic to run properly, keeps segfaulting but won't produce a core dump which makes it quite hard to debug. Also my raid array had a hd fail and so my mythboxes hd was pulled to replace it. I should be returning to working on it in the next few days. bye Pete |
|
| Author: | Xsecrets [ Fri Mar 26, 2004 8:22 am ] |
| Post subject: | |
well the most common cause for a segfault on a epia-m system is using the i686 binaries. |
|
| Author: | pete-edworthy [ Sun Mar 28, 2004 1:18 pm ] |
| Post subject: | i686 |
The M10000 runs i686 code fine, and I've recompiled it with the optimisations recommended for the cpu by via. I think the problem is different versions of the OSS emulation on the sys. I'm going to try rebuilding soon using the apt-get alsa rather than from src. bye Pete |
|
| Author: | Xsecrets [ Sun Mar 28, 2004 1:59 pm ] |
| Post subject: | |
well if I'm not mistaken the m10000 is the nemiah core and they added the sse instructions in that chip, so that is why it works with the i686 code. Any earlier via chip like the m8000 or m6000 will not. |
|
| Author: | pba [ Sun Apr 11, 2004 8:06 am ] |
| Post subject: | |
Hi Pete I would be happy to help out with testing your instructions. I have an EPIA M10000 with a PVR 350 in PAL land. Thanks |
|
| Author: | jayb [ Sun Apr 25, 2004 1:36 am ] |
| Post subject: | |
Hi Pete, Any news on how it is going? Thanks Jay |
|
| Page 1 of 5 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|