Girkers wrote:
Don't worry madsholme, you are not going mad, I concur that xine was the default player on A16 and A26
That´s always something
Any way, now using xine as my dvd player.. now its time to figure out how to get it to play 5.1 sound
| LinHES Forums http://forum.linhes.org/ |
|
| dvd menu on mplayer? http://forum.linhes.org/viewtopic.php?f=6&t=7951 |
Page 1 of 1 |
| Author: | madsholme [ Wed Jan 18, 2006 7:45 pm ] |
| Post subject: | dvd menu on mplayer? |
Hi is it just me/my instalation there is something wrong with, or is it normal that, mplayer dosent have any dvd menu function? i am using a30 knoppmyth, where mplayer is the default dvd player. when i inset a dvd and start it, it just starts playing, no menu or anything. ? |
|
| Author: | tjc [ Wed Jan 18, 2006 8:16 pm ] |
| Post subject: | |
No DVD menu support in mplayer. However xine does have this support. |
|
| Author: | tjc [ Wed Jan 18, 2006 8:27 pm ] |
| Post subject: | |
No DVD menu support in mplayer. However xine does have this support. |
|
| Author: | madsholme [ Wed Jan 18, 2006 8:28 pm ] |
| Post subject: | |
tjc wrote: No DVD menu support in mplayer. However xine does have this support.
alright tnx... thought mplayer had gotten dvd menu support since it was change to the default dvd player... |
|
| Author: | cesman [ Wed Jan 18, 2006 10:23 pm ] |
| Post subject: | |
MPlayer has always been the default media player and it will continue to be... |
|
| Author: | madsholme [ Wed Jan 18, 2006 10:27 pm ] |
| Post subject: | |
cesman wrote: MPlayer has always been the default media player and it will continue to be...
erm... in a16 and (i think in a26) Xine was used to play dvd´s with as default... mplayer was for media files, and xine for dvd´s from the dvd drive. at least it was always like that on every instalation i did... |
|
| Author: | Girkers [ Thu Jan 19, 2006 8:55 pm ] |
| Post subject: | |
Don't worry madsholme, you are not going mad, I concur that xine was the default player on A16 and A26 |
|
| Author: | madsholme [ Thu Jan 19, 2006 9:34 pm ] |
| Post subject: | |
Girkers wrote: Don't worry madsholme, you are not going mad, I concur that xine was the default player on A16 and A26
That´s always something
Any way, now using xine as my dvd player.. now its time to figure out how to get it to play 5.1 sound
|
|
| Author: | myth@chakobsa.net [ Tue Nov 06, 2007 1:56 pm ] |
| Post subject: | |
I had been under the impression that mplayer didn't support DVD menus, but I was looking through the mplayer man page on my KnoppMyth R5F1 box and I noticed the following command in the keyboard commands section: Quote: (The following keys are only valid if you compiled with dvdnav
support: they are used to navigate the menus) and a list of key commands for menu navigation. Does R5F1 have this? If not, has anyone added it and how painful was it? The built in DVD player in mythtv doesn't produce sound and Xine crashes with a dialog box that is too tiny to read on my TV. I've been using DVD Fab HD Decrypter to extract the main movie from my DVDs and save it in .iso format and play it with mplayer-resumer.pl. I'd sure like to be able to extract the full disc as .iso and use it complete with menus. So, I have the following questions: 1) Does R5F1 have this dvdnav support? 2) How do I figure out the LIRC "config" statements? The man page only gives the keyboard commands. 3) Is mplayer-resumer.pl compatible with a full DVD? I definitely have a tendency to interrupt viewing part way through and come back later to finish watching. |
|
| Author: | slowtolearn [ Tue Nov 06, 2007 2:50 pm ] |
| Post subject: | |
myth@chakobsa.net wrote: I had been under the impression that mplayer didn't support DVD menus, but I was looking through the mplayer man page on my KnoppMyth R5F1 box and I noticed the following command in the keyboard commands section: As new as the menu navigation is I would be very surprised. See http://ubuntuforums.org/showthread.php?t=570465 , you will most likely need to download/install from source (both MPlayer and libdvdnav). Also see http://www.mplayerhq.hu/design7/news.htmlQuote: (The following keys are only valid if you compiled with dvdnav support: they are used to navigate the menus) and a list of key commands for menu navigation. Does R5F1 have this? myth@chakobsa.net wrote: ...and Xine crashes with a dialog box that is too tiny to read on my TV. http://www.videolan.org , search for CSS. You'll see it as "pineapple" here in these forums.
|
|
| Author: | myth@chakobsa.net [ Tue Nov 06, 2007 6:33 pm ] |
| Post subject: | |
I don't think it's CSS. I think DVDFab HD Decrypter takes care of that. If I download mplayer from source and compile it, what are my chances of it working without trashing something else? I've been hesitant to install software because of past experiences where I've trashed Linux boxes beyond my ability to repair by installing bleeding edge source code. |
|
| Author: | slowtolearn [ Tue Nov 06, 2007 6:51 pm ] |
| Post subject: | |
myth@chakobsa.net wrote: I don't think it's CSS. I think DVDFab HD Decrypter takes care of that. The error comes up when you try to play the ripped .iso, or when you try to play the disc (or both)?myth@chakobsa.net wrote: If I download mplayer from source and compile it, what are my chances of it working without trashing something else? I've been hesitant to install software because of past experiences where I've trashed Linux boxes beyond my ability to repair by installing bleeding edge source code. No clue. Of course you could always make a backup, try to compile/install the latest MPlayer/libdvdnav and if it goes belly-up, perform an upgrade to the same version...
|
|
| Author: | tjc [ Tue Nov 06, 2007 7:04 pm ] |
| Post subject: | |
myth@chakobsa.net wrote: 2) How do I figure out the LIRC "config" statements? The man page only gives the keyboard commands.
This posting contains examples: http://mysettopbox.tv/phpBB2/viewtopic.php?t=15551 Additional action names for Xine can be found in /home/mythtv/.xine/keymap |
|
| Author: | myth@chakobsa.net [ Wed Nov 07, 2007 6:28 pm ] |
| Post subject: | |
slowtolearn wrote: myth@chakobsa.net wrote: I don't think it's CSS. I think DVDFab HD Decrypter takes care of that. The error comes up when you try to play the ripped .iso, or when you try to play the disc (or both)?When playing the iso. I don't have a DVD drive in my mythtv box so I'm reading discs on a Windows machine and transfering the iso to the mythtv box. I see that my R5F1 box already has libdvdnav on it: Code: /usr/share/doc$ ls libdvdn* libdvdnav-dev: AUTHORS TODO changelog.gz dvd_structures.gz README changelog.Debian.gz copyright tutorial.cpp.gz libdvdnav4: AUTHORS README.Debian TODO changelog.gz examples README README.MAP.gz changelog.Debian.gz copyright and the changelog indicates it is version 0.1.10 which is the latest version on http://dvd.sourceforge.net/ Is the following message when configuring mplayer good? It sort of looks like it wants me to configure some more options but I'm not clear on the syntax. mplayer is compiling now (taking quite a while) but I'm a little hesitant to do an install if it might replace my working mplayer with a trashed one. Will "apt-get install mplayer" replace my custom compiled version with a guaranteed good version? Code: Checking for color console output ... no
Checking for DVD support (libdvdnav) ... Usage: dvdnav-config [OPTIONS] [LIBRARIES] Options: [--prefix[=DIR]] [--exec-prefix[=DIR]] [--version] [--libs] [--cflags] yes Creating config.mak Creating config.h Config files successfully generated by ./configure --enable-dvdnav ! |
|
| Author: | myth@chakobsa.net [ Mon Nov 12, 2007 10:19 pm ] |
| Post subject: | |
I figured out how to get the full list of commands Code: $ mplayer -input cmdlist
MPlayer 1.0rc1-4.1.2 (C) 2000-2006 MPlayer Team CPU: Intel(R) Celeron(R) CPU 2.53GHz (Family: 15, Model: 4, Stepping: 1) CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1 Compiled with runtime CPU detection. seek Float [Integer] edl_mark audio_delay Float [Integer] speed_incr Float speed_mult Float speed_set Float quit [Integer] pause frame_step grab_frames pt_step Integer [Integer] pt_up_step Integer [Integer] alt_src_step Integer sub_delay Float [Integer] sub_step Integer [Integer] osd [Integer] osd_show_text String [Integer] [Integer] osd_show_property_te String [Integer] [Integer] volume Float [Integer] use_master mute [Integer] contrast Integer [Integer] gamma Integer [Integer] brightness Integer [Integer] hue Integer [Integer] saturation Integer [Integer] frame_drop [Integer] sub_pos Integer [Integer] sub_alignment [Integer] sub_visibility [Integer] sub_load String sub_remove [Integer] vobsub_lang [Integer] sub_select [Integer] sub_log get_percent_pos get_time_pos get_time_length get_file_name get_video_codec get_video_bitrate get_video_resolution get_audio_codec get_audio_bitrate get_audio_samples get_meta_title get_meta_artist get_meta_album get_meta_year get_meta_comment get_meta_track get_meta_genre switch_audio [Integer] tv_step_channel Integer tv_step_norm tv_step_chanlist tv_set_channel String tv_last_channel tv_set_freq Float tv_set_norm String tv_set_brightness Integer [Integer] tv_set_contrast Integer [Integer] tv_set_hue Integer [Integer] tv_set_saturation Integer [Integer] forced_subs_only [Integer] dvb_set_channel Integer Integer switch_ratio [Float] vo_fullscreen [Integer] vo_ontop [Integer] file_filter Integer vo_rootwin [Integer] vo_border [Integer] screenshot [Integer] panscan Float [Integer] switch_vsync [Integer] loadfile String [Integer] loadlist String [Integer] run String change_rectangle Integer Integer gui_loadfile gui_loadsubtitle gui_about gui_play gui_stop gui_playlist gui_preferences gui_skinbrowser dvdnav Integer menu String set_menu String [String] help exit hide [Integer] get_vo_fullscreen get_sub_visibility key_down_event Integer set_property String String get_property String seek_chapter Integer [Integer] set_mouse_pos Integer Integer Not the most userfriendly thing in the world, but good enough to make a guess at what you need. Turns out the config command I was looking for was "switch_audio" which I bound to a key on my remote and I can now cycle through the various audio tracks. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|