Has anyone got this working?
Selecting this remote in the installation fails for me, still.
Before I start messing things up just wondered if there is a simple fix?
| LinHES Forums http://forum.linhes.org/ |
|
| Hauppauge silver remote on R5B7 http://forum.linhes.org/viewtopic.php?f=6&t=9138 |
Page 1 of 2 |
| Author: | timd [ Tue Mar 21, 2006 8:21 am ] |
| Post subject: | Hauppauge silver remote on R5B7 |
Has anyone got this working? Selecting this remote in the installation fails for me, still. Before I start messing things up just wondered if there is a simple fix?
|
|
| Author: | cesman [ Tue Mar 21, 2006 8:23 am ] |
| Post subject: | |
 How many times do you intend on posting this?
|
|
| Author: | timd [ Tue Mar 21, 2006 8:31 am ] |
| Post subject: | |
Why is it such a problem? I've searched and not found an answer. I believed it to be an installation issue, as the install asks the questions but it didn't work - hence posting it in that forum. You obviously disagree as it's been deleted.. Where should I post this question?? |
|
| Author: | dartmanx [ Tue Mar 21, 2006 8:36 am ] |
| Post subject: | |
If you have the AHP-415 remote, with the colored buttons on the bottom, try this: http://knoppmythwiki.org/index.php?page ... e250Remote I intend to try tonight, but if it doesn't work, I'm not going to spam the forums over it. |
|
| Author: | numbski [ Tue Mar 21, 2006 8:38 am ] |
| Post subject: | |
I did get it to work. I selected it out of the menu. My problem, oddly enough, was that that cable doesn't get seated correctly into the port on the card. What you can do is run the script that goes searching for the on/off code (sorry not in front of my myth box right now), I thought it was like "select_power_new", and the red led will flash over and over if you have it seated correctly. Run the script, and play with plugging and unplugging the cable slowly until you seat it correctly. I know it sounds silly, but that's what did it for me. |
|
| Author: | timd [ Tue Mar 21, 2006 8:42 am ] |
| Post subject: | |
dartmanx wrote: If you have the AHP-415 remote, with the colored buttons on the bottom, try this:
http://knoppmythwiki.org/index.php?page ... e250Remote I intend to try tonight, but if it doesn't work, I'm not going to spam the forums over it. I have tried that thanks, with no luck so far. I didn't "spam the forums" either, I asked a question. My only crime seems to have been misinterpreting the right place to ask a question.. 
|
|
| Author: | timd [ Tue Mar 21, 2006 8:45 am ] |
| Post subject: | |
numbski wrote: I did get it to work. I selected it out of the menu.
My problem, oddly enough, was that that cable doesn't get seated correctly into the port on the card. What you can do is run the script that goes searching for the on/off code (sorry not in front of my myth box right now), I thought it was like "select_power_new", and the red led will flash over and over if you have it seated correctly. Run the script, and play with plugging and unplugging the cable slowly until you seat it correctly. I know it sounds silly, but that's what did it for me. Don't think it's this as some of the buttons do work. Arrows and ok are fine, number buttons seem to work as arrows, and backup does nothing. 
|
|
| Author: | numbski [ Tue Mar 21, 2006 8:45 am ] |
| Post subject: | |
Oh, that's just a keymapping issue. You're in the wrong place then.  You need to go look up faqs and re-mapping keys for lirc. I know, because I have the exact same issue, along with the fact that in the guide I don't have a "page down" so to speak. Both chan up/down and arrow up/down go one listing up and down, rather than full pages, and you're right, rewind does nothing by default.
I just haven't had time to futz with re-mapping all of the keys. You have it working as well as a default install will work I think. |
|
| Author: | numbski [ Tue Mar 21, 2006 8:49 am ] |
| Post subject: | Re: Hauppauge silver remote on R5B7 |
timd wrote: Has anyone got this working?
Selecting this remote in the installation fails for me, still. Before I start messing things up just wondered if there is a simple fix? FYI, that's a wholly misleading question. The installation *did* work if you have keys working.  At first glance, I'd have thought you could get the remote working *at all*, not so. You have to get descriptive postings in order to receive assistance.
|
|
| Author: | timd [ Tue Mar 21, 2006 8:50 am ] |
| Post subject: | |
numbski wrote: Oh, that's just a keymapping issue.
You're in the wrong place then. You need to go look up faqs and re-mapping keys for lirc. I know, because I have the exact same issue, along with the fact that in the guide I don't have a "page down" so to speak. Both chan up/down and arrow up/down go one listing up and down, rather than full pages, and you're right, rewind does nothing by default.I just haven't had time to futz with re-mapping all of the keys. You have it working as well as a default install will work I think. Ok, thanks.
|
|
| Author: | timd [ Tue Mar 21, 2006 8:53 am ] |
| Post subject: | Re: Hauppauge silver remote on R5B7 |
numbski wrote: FYI, that's a wholly misleading question. The installation *did* work if you have keys working.
At first glance, I'd have thought you could get the remote working *at all*, not so. You have to get descriptive postings in order to receive assistance.Fair enough - my apologies. Everything else in this release worked so well, it's much better now with my DVB-T card, that I guess my expectations were too high for the remotes! 
|
|
| Author: | numbski [ Tue Mar 21, 2006 9:02 am ] |
| Post subject: | |
Meh, this is something that bothers me, but not because of ease of use or release quality. It's just that if I were to send a unix novice out and tell them "go use knoppmyth, it's easy", I'd be lying a bit. That's not shot at the devs, after all, the release is R5B7. Beta. It's not all going to work like magic.
In fact I'm hoping that I can contribute to some degree, but as I said, this isn't a KnoppMyth thing, it's a lirc thing. The blaster functionality is something else that could use some work. Get a working blaster config file is....trying. Huge text file that has to be chopped down to a not-so-huge text file, and you manually have to figure out which profile works. An on-screen prompt of "is your (device) on now?" yes/no might go a go way and then script the creation of the blaster file.
Again, certain no shot at the devs, this whole thing is a bang-up job. I love it, but there's always room to make things even better.
|
|
| Author: | kwbolte [ Wed Mar 29, 2006 3:55 pm ] |
| Post subject: | |
Just to mention - none of the directions in the forum or the Wiki worked for me (I own a A415-HPG connected to a Hauppauge Nova-S Plus) - so perhaps you can take a look at my HowTo and scroll down to The remote: |
|
| Author: | bmc34 [ Fri Mar 31, 2006 11:06 am ] |
| Post subject: | |
kwbolte wrote: Just to mention - none of the directions in the forum or the Wiki worked for me (I own a A415-HPG connected to a Hauppauge Nova-S Plus) - so perhaps you can take a look at my HowTo and scroll down to The remote:
I had the same problem after upgradeing. some buttons did not work. I copied by old lircd.codf to /etc/lircd.conf Hers is a copiy of my lircd.conf Code: #
# # brand: Hauppauge # Created: G.J. Werler (The Netherlands) # Project: Mythtv Fedora Pundit-R www.mythtvportal.com # Date: 2004/11/28 # model no. of remote control: Hauppauge A415-HPG # devices being controlled by this remote: PVR-350 or 250 # begin remote name Hauppauge_350 bits 13 flags RC5|CONST_LENGTH eps 30 aeps 100 one 969 811 zero 969 811 plead 1097 gap 114605 toggle_bit 2 begin codes Go 0x00000000000017BB Power 0x00000000000017BD TV 0x000000000000179C Videos 0x0000000000001798 Music 0x0000000000001799 Pictures 0x000000000000179A Guide 0x000000000000179B Radio 0x000000000000178C Up 0x0000000000001794 Left 0x0000000000001796 Right 0x0000000000001797 Down 0x0000000000001795 OK 0x00000000000017A5 Back/Exit 0x000000000000179F Menu/i 0x000000000000178D Vol+ 0x0000000000001790 Vol- 0x0000000000001791 Prev.Ch 0x0000000000001792 Mute 0x000000000000178F Ch+ 0x00000000000017A0 Ch- 0x00000000000017A1 Record 0x00000000000017B7 Stop 0x00000000000017B6 Rewind 0x00000000000017B2 Play 0x00000000000017B5 Forward 0x00000000000017B4 Replay/SkipBackward 0x00000000000017A4 Pause 0x00000000000017B0 SkipForward 0x000000000000179E 1 0x0000000000001781 2 0x0000000000001782 3 0x0000000000001783 4 0x0000000000001784 5 0x0000000000001785 6 0x0000000000001786 7 0x0000000000001787 8 0x0000000000001788 9 0x0000000000001789 Asterix 0x000000000000178A 0 0x0000000000001780 # 0x000000000000178E Red 0x000000000000178B Green 0x00000000000017AE Yellow 0x00000000000017B8 Blue 0x00000000000017A9 end codes end remote Hope it helps |
|
| Author: | DaJoob [ Fri Mar 31, 2006 3:51 pm ] |
| Post subject: | |
LIRC is getting a signal from my remote, but for some reason it seems as if the commands don't get sent to mythtv. When I run irw and press buttons, I can see that LIRC is getting a signal and that everything corresponds right to my lircd.conf, but for some reason, mythtv just isn't receiving the commands. Here's my two config files: /etc/lirc/lircd.conf: http://www.dajoob.com/pub/lircd.conf /home/mythtv/.mythtv/lircrc: http://www.dajoob.com/pub/lircrc |
|
| Page 1 of 2 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|