| LinHES Forums http://forum.linhes.org/ |
|
| Low Volume http://forum.linhes.org/viewtopic.php?f=6&t=9277 |
Page 1 of 1 |
| Author: | zap30 [ Sun Mar 26, 2006 6:47 am ] |
| Post subject: | Low Volume |
I have just installed Knoppmyth 5B7 & have very low volume. I have set alsamixer volumes to the maximum & the myth volume is set at maximum, yet with my TV at full volume I can only just hear it. Using the same hardware setup with 5a26 worked perfectly. Is there anything I can do? thanks |
|
| Author: | dartmanx [ Sun Mar 26, 2006 7:05 am ] |
| Post subject: | |
Yup. You can post your hardware details... |
|
| Author: | zap30 [ Sun Mar 26, 2006 10:52 am ] |
| Post subject: | |
I am using a Shuttle PC. Athlon 1800+ with 1024MB memory, Geforce 5200, Realtec ALC650 soundcard & a WinTV Nova-T. Thanks |
|
| Author: | j0dest3r [ Sun Mar 26, 2006 10:58 pm ] |
| Post subject: | Same Here |
I have a PVR-350 in a PIII 1.2 with a SB 5.1. I'm using the mini plug out the back of the 350 and the volume is low. I'm a total Linux Newbie so I'm looking for ideas on how to troubleshoot. Once I get the TV-Out port up and running, perhaps the volume will be louder too?? IC now... need a loop back cable from the PVR card out to the line in on my sound card. volume is still low though. time to do some poking around. |
|
| Author: | daniel_ei [ Sun Apr 09, 2006 9:19 am ] |
| Post subject: | |
I also have pvr-350 and pIII 1G. I was using R5A30.2 and the volume was fine. I upgraded tp R5B7 and now the volume is low amd also the picture is more choppy on some channels ? any ideas ? |
|
| Author: | DrewCS [ Sun Apr 09, 2006 9:38 am ] |
| Post subject: | |
Did you check your recording profiles? When I upgraded to R5B7 the recording volume was at 90% |
|
| Author: | tjc [ Sun Apr 09, 2006 9:53 am ] |
| Post subject: | |
That's been done on purpose according to what I've read. They're trying to avoid the distortion a lot of people expereience above 90-95%. I can testify that at 100% one of my PVR cards sounds pretty awful, lots of clipping artifacts and the like. |
|
| Author: | stu [ Tue May 23, 2006 2:46 pm ] |
| Post subject: | |
bump. has anyone come up with a solution to this? I too had things working fine prior to upgrading to R5B7. Now the volume for tv recording playback is very low. /Stu |
|
| Author: | eternalistic [ Wed Jun 07, 2006 9:26 am ] |
| Post subject: | |
Im also having the same type of issue. Everything I watch through KnoppMyth is really quite and I have to almost max my TV's volume in order to hear anything, and that results in a loud constant humming in the background. The audio is quite for everything, DVDs, Music CDs, MP3s and ISO movies. Has anyone found a fix for this issue? Im using the onboard audio card, could this be causing the problem? What audio card should I try before I give up and go back to Windows Media Center (my last resort). |
|
| Author: | nickread [ Wed Jun 07, 2006 4:46 pm ] |
| Post subject: | |
Run aumix and make sure all relevant volumes are up. I've not noticed any difference in R5B7. |
|
| Author: | tjc [ Wed Jun 07, 2006 6:10 pm ] |
| Post subject: | |
There are 3-4 different volume controls and they're cummulative. Off the top of my head (and I'm probably missing at least one). - Recording volume in the recording profile - PCM(?) output volume for playback - Master output volume So if all of those are at 80% you end up with ~50% of the real maximum. I keep recording volume at 90-95% to avoid excessive clipping, PCM at ~80%, and master at 100%, giving about 80% of the real maximum with decent quality. |
|
| Author: | operat0r_001 [ Mon Jun 09, 2008 10:09 pm ] |
| Post subject: | |
alsamixer worked for me I just turned up each deal if it did anything I turned it up all the way if not I put it back |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|