LinHES Forums http://forum.linhes.org/ |
|
Backend only. Geode NX 1750, sis 741glx-m2 mobo, Air2pc 0.2 http://forum.linhes.org/viewtopic.php?f=8&t=10539 |
Page 1 of 1 |
Author: | aovermy [ Mon Jun 19, 2006 9:45 am ] |
Post subject: | Backend only. Geode NX 1750, sis 741glx-m2 mobo, Air2pc 0.2 |
This is the $149 Fry's Electronics PC that's sold with LinSpire with 128M of Ram and 40G harddrive. I of course wiped Linspire and put KnoppMyth on the 40 G harddrive. I added in 512M of ram I had lying about and 160G harddrive for /myth and added my air2pc rev 0.2 tuner. Install was easy and mythtv-setup found my card just fine. And for a $149 PC, it's pretty nice. By removing the modem (bah, who needs one?) I have 4 PCI slots, it has a 8x AGP slot, supports 8 USB2.0 ports (would need 2 brackets for the last 4 though it doesn't come with), supports 2 COM ports (would need a bracket for com2). This is a backend only as its only purpose is to record ts files that can be played over the network (via tapeworm & samba) on a winxp pc running a MyHD HD decoding card. One of the real benefits of the geode chip is that it is not overly heat producing and low energy consumption. |
Author: | trimtab [ Tue Jul 25, 2006 6:44 pm ] |
Post subject: | |
That would be the 'GQ 3151 AMD GEODE NX1750', correct? Does the motherboard in that unit still have S/PDIF on it? I have used earlier Fry's GQ31xx systems and one of the benefits is that the ECS 741GX-M Motherboard had an S/PDIF riser on it. Thanks in advance, |
Author: | mihanson [ Fri Aug 11, 2006 4:21 pm ] |
Post subject: | Re: Backend only. Geode NX 1750, sis 741glx-m2 mobo, Air2pc |
aovermy wrote: This is the $149 Fry's Electronics PC that's sold with LinSpire with 128M of Ram and 40G harddrive. I of course wiped Linspire and put KnoppMyth on the 40 G harddrive. I added in 512M of ram I had lying about and 160G harddrive for /myth and added my air2pc rev 0.2 tuner. Install was easy and mythtv-setup found my card just fine.
And for a $149 PC, it's pretty nice. By removing the modem (bah, who needs one?) I have 4 PCI slots, it has a 8x AGP slot, supports 8 USB2.0 ports (would need 2 brackets for the last 4 though it doesn't come with), supports 2 COM ports (would need a bracket for com2). I have one of these GQ Fry's specials. In fact, I think I have the same one. I bought it as a "project computer" that I could expariment with. One thing I want to do is try Knoppmyth on it, set it up as a backend or NFS. I'm happy to hear that I shouldn't have too much trouble! |
Author: | trimtab [ Fri Aug 11, 2006 5:02 pm ] |
Post subject: | |
You'll have no trouble for SDTV. But it is too slow for HDTV. At least over Firewire. |
Author: | lepooner38 [ Thu Mar 22, 2007 6:38 pm ] |
Post subject: | Re: Backend only. Geode NX 1750, sis 741glx-m2 mobo, Air2pc |
aovermy wrote: This is the $149 Fry's Electronics PC that's sold with LinSpire with 128M of Ram and 40G harddrive. I of course wiped Linspire and put KnoppMyth on the 40 G harddrive. I added in 512M of ram I had lying about and 160G harddrive for /myth and added my air2pc rev 0.2 tuner. Install was easy and mythtv-setup found my card just fine.
One of the real benefits of the geode chip is that it is not overly heat producing and low energy consumption. I wonder how it is going after 7 months? Any issues that were not readily apparent? |
Author: | lepooner38 [ Thu Nov 22, 2007 9:13 pm ] |
Post subject: | Re: Backend only. Geode NX 1750, sis 741glx-m2 mobo, Air2pc |
lepooner38 wrote: Quote: I wonder how it is going after 7 months? Any issues that were not readily apparent? Bump???? |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |