Author |
Message |
manicmike
|
Posted: Thu Jun 14, 2007 3:53 am |
|
Joined: Sun Aug 28, 2005 7:07 pm
Posts: 821
Location:
Melbourne, Australia
|
nicom wrote: As you can see it has country=au. Maybe there is a problem with my iso
Hi Richard,
Yes, it should have run that script (where it asks for TUHS stuff) during the post-install setup.
Try running KnoppMyth-run directly next. If it doesn't run the Ausdragon script you ran manually, it will probably narrow it down to /bin/grep being missing, and that would probably mean you don't have a complete iso (like you said).
In that case, cat /proc/cmdline|grep 'country=au' is the line that fails and you should try to run it manually.
Did you have trouble downloading or burning the iso? Did the checksums match? Were there any glitches during the install?
Mike
_________________ ********************* LinHES 7.4 Australian Dragon *********************
|
|
Top |
|
|
nicom
|
Posted: Thu Jun 14, 2007 5:21 am |
|
Joined: Mon Aug 14, 2006 8:24 pm
Posts: 320
Location:
Melbourne, Australia
|
Mike,
If by "running KnoppMyth-run" you mean from the console all that happens is the frontend starts up with no attempt to run the script. I had a look in /bin and there is a grep file although it is full of unreadable characters.
I tried "cat /proc/cmdline|grep 'country=au'" in the console followed by the Tweaker script and it just dropped back to the prompt.
As for the download, I got it from bit torrent with no problems. I just checked the md5 and it comes up OK. Maybe it's in the CD burn although I did slow it down to 4X.
Richard
|
|
Top |
|
|
manicmike
|
Posted: Thu Jun 14, 2007 5:46 am |
|
Joined: Sun Aug 28, 2005 7:07 pm
Posts: 821
Location:
Melbourne, Australia
|
nicom wrote: Mike,
If by "running KnoppMyth-run" you mean from the console all that happens is the frontend starts up with no attempt to run the script. I had a look in /bin and there is a grep file although it is full of unreadable characters.
I tried "cat /proc/cmdline|grep 'country=au'" in the console followed by the Tweaker script and it just dropped back to the prompt.
As for the download, I got it from bit torrent with no problems. I just checked the md5 and it comes up OK. Maybe it's in the CD burn although I did slow it down to 4X.
Richard
Whoops! Sorry. Before running it, type "touch /home/mythtv/.configure" in the console.
Mike
_________________ ********************* LinHES 7.4 Australian Dragon *********************
|
|
Top |
|
|
nicom
|
Posted: Thu Jun 14, 2007 11:49 pm |
|
Joined: Mon Aug 14, 2006 8:24 pm
Posts: 320
Location:
Melbourne, Australia
|
Mike,
I reburnt a CD from my downloaded image and tried that. Same result.
a) I tried the following
Code: touch /home/mythtv/.configure cat /proc/cmdline|grep 'country=au' KnoppMyth-run and it checked time zone and went through to the standard setup to mythtv-setup with no pick-up of stations. b) I also tried Code: touch /home/mythtv/.configure cat /proc/cmdline|grep 'country=au' AusDragonTweaker.sh
and it asked for state, weather location, TUHS username, password and then after a long pause it went back to the prompt. I then tried KnoppMyth-run and got the same result as a).
I also tried the same as b) but instead of KnoppMyth-run I shut down the backend and ran mythtv-setup. Same result.
One thing I haven't mentioned is that I do not have the Streamzap remote at the moment and I have the Fusion remote sensor plugged into a usb port but I don't believe this would cause a problem.
Richard
|
|
Top |
|
|
nicom
|
Posted: Fri Jun 15, 2007 10:12 pm |
|
Joined: Mon Aug 14, 2006 8:24 pm
Posts: 320
Location:
Melbourne, Australia
|
Another update.
I downloaded another iso and burnt another disk. Same result as previous.
|
|
Top |
|
|
nicom
|
Posted: Mon Jun 18, 2007 5:35 pm |
|
Joined: Mon Aug 14, 2006 8:24 pm
Posts: 320
Location:
Melbourne, Australia
|
Latest update.
I finally got the Streamzap remote and reinstalled KM. Again the script failed to perform the setup. I have given up and performed mythtv-setup manually and run Mike's fixepg-au.sh script to populate the program guide. The machine appears to be working well with both cards recording.
|
|
Top |
|
|
manicmike
|
Posted: Mon Jun 18, 2007 7:14 pm |
|
Joined: Sun Aug 28, 2005 7:07 pm
Posts: 821
Location:
Melbourne, Australia
|
nicom wrote: Latest update.
I finally got the Streamzap remote and reinstalled KM. Again the script failed to perform the setup. I have given up and performed mythtv-setup manually and run Mike's fixepg-au.sh script to populate the program guide. The machine appears to be working well with both cards recording.
Hi Richard,
Can you send me a zipped copy of /var/log/mythtv/KnoppMyth-run.log from your machine? I'm guessing "no" as you've just installed it manually, but if you have a copy of a failed auto-install version, I'd appreciate having a look.
Great you have it running, all the same.
Thanks
Mike
_________________ ********************* LinHES 7.4 Australian Dragon *********************
|
|
Top |
|
|
Human
|
Posted: Mon Jun 18, 2007 9:40 pm |
|
Joined: Thu Sep 30, 2004 11:29 am
Posts: 2419
Location:
Mechanicsburg, PA
|
Mike, if someone has this problem again, be sure to have them run AusDragonTweaker.sh and AusSQLtweak.sh manually. Both are necessary to do the tweaking, from my brief scan of the scripts.
_________________ KnoppMyth R5.5
MythiC Dragon v2.0
Join the KnoppMyth Frappr!
|
|
Top |
|
|
Human
|
Posted: Mon Jun 18, 2007 9:47 pm |
|
Joined: Thu Sep 30, 2004 11:29 am
Posts: 2419
Location:
Mechanicsburg, PA
|
Even though this isn't my baby, I think I may have found the problem Mike, I think you need to augment KnoppMyth-run to add double quotes around your $IS_AUS checks. Example:
Code: IS_AUS=`echo "auto BOOT_IMAGE=Linux ro root=801 splash=silent nomce all-generic-ide pci=nommconf apm=power-off quiet country=au resume2=swap:/dev/sda2 noresume2" | grep 'country=au'` # if [ -n $IS_AUS ]; then echo "doooo"; fi -bash: [: too many arguments but... Code: # if [ -n "$IS_AUS" ]; then echo "doooo"; fi doooo
_________________ KnoppMyth R5.5
MythiC Dragon v2.0
Join the KnoppMyth Frappr!
|
|
Top |
|
|
nicom
|
Posted: Tue Jun 19, 2007 1:29 am |
|
Joined: Mon Aug 14, 2006 8:24 pm
Posts: 320
Location:
Melbourne, Australia
|
Mike,
When I said manual install, I did try it with the ausdragon2 boot parameter but just resorted to manual when the setup did not happen. The /var/log/mythtv/KnoppMyth-run.log is very short and not worth zipping. Here it is
Code: *** /usr/local/bin/KnoppMyth-run started running on Sun Jun 17 21:22:11 PDT 2007 *** --- --- --- 'mythtv' web user account setup ... httpd not running, trying to start httpd not running, trying to start --- (Reading database ... 83202 files and directories currently installed.) Preparing to replace libgl1-mesa-dev 6.5.1-0.5 (using libgl1-mesa-dev_6.5.1-0.5_i386.deb) ... Unpacking replacement libgl1-mesa-dev ... Preparing to replace mesa-common-dev 6.5.1-0.5 (using mesa-common-dev_6.5.1-0.5_all.deb) ... Unpacking replacement mesa-common-dev ... Setting up mesa-common-dev (6.5.1-0.5) ... Setting up libgl1-mesa-dev (6.5.1-0.5) ... ---
Hope that helps.
Richard
|
|
Top |
|
|
manicmike
|
Posted: Thu Jun 21, 2007 10:51 pm |
|
Joined: Sun Aug 28, 2005 7:07 pm
Posts: 821
Location:
Melbourne, Australia
|
nicom wrote: Mike,
When I said manual install, I did try it with the ausdragon2 boot parameter but just resorted to manual when the setup did not happen. The /var/log/mythtv/KnoppMyth-run.log is very short and not worth zipping. Here it is
Hope that helps.
Richard
No, not at all, but that's cool. I realised that you probably wouldn't have made a copy of the log file from an unsuccessful attempt (I wouldn't have, either).
I installed onto foreign hardware yesterday using "ausdragon2" (Athlon XP2500+ ) and it still worked. Only weird thing was that it re-named the IDE drive "hde" and the SATA drive "hda". Still, worked well.
I'd been setting it up for a friend and had neglected to set up the channels in TUHS. So, did that then ran fixepg-au.sh and mythfilldatabase and it fixed it all up.
Glad it worked in the end and that my script (even if it was a different one) was of assistance.
_________________ ********************* LinHES 7.4 Australian Dragon *********************
|
|
Top |
|
|