LinHES Forums http://forum.linhes.org/ |
|
Asus P4P800-VM/Hauppauge PVR-150MCE/ATI Radeon 9250 http://forum.linhes.org/viewtopic.php?f=8&t=17745 |
Page 1 of 1 |
Author: | roofchop [ Sun Jan 27, 2008 8:21 pm ] |
Post subject: | Asus P4P800-VM/Hauppauge PVR-150MCE/ATI Radeon 9250 |
Been a MythTV/Ubuntu user for over a year, was unhappy so I thought I would try KnoppMyth. I love it so far. Everything just worked...except, I had to reboot to get the frontend to find the backend. Things I need to work out: Analog Surround Sound from the onboard sound card S-Video TV out to the Projector MCE Remote Keyboard Here is my setup: # Video type: SDTV # Type of system: combined front- and back-end # Noise level: I can barely hear it from 5 feet away # CASE:Antec Fusion # PSU:Quiet high-efficiency 430 Watt ATX12V v2.0 # MOTHERBOARD:Asus P4P800-VM # CPU:Celeron 2.0Ghz # RAM:512mb 266DDR # CPU HEATSINK:Zalman (big orange one) # NORTHBRIDGE HEATSINK: (unknown) # CD/DVD-RW: Lite-On Lightscribe DVD/CD Burner # HDD: WD250Gb IDE # GRAPHICS CARD:ATI Radeon 9250 # SOUNDCARD: Onboard # TUNER CARD:Hauppauge PVR-150MCE # REMOTE CONTROL:MCE Remote Keyboard (issues!!) Thank to everyone for creating this. Peace, Josh |
Author: | tjc [ Sun Jan 27, 2008 10:50 pm ] |
Post subject: | Re: Asus P4P800-VM/Hauppauge PVR-150MCE/ATI Radeon 9250 |
roofchop wrote: I had to reboot to get the frontend to find the backend.
Known issue. See the R5F27 Hints for this and more. The root of the problem is a bug with the restart handling in the /etc/init.d/mythtv-backend script. A quick and dirty fix is to change lines 58-59 to look something like this Code: start-stop-daemon --stop --oknodo --pidfile $RUNDIR/$NAME.pid \
--chuid $USER --exec $DAEMON -- $ARGS || : ignore any errors The text after the "do nothing" command ":" is ignored, but serves to explain why it's there. |
Author: | roofchop [ Fri Feb 08, 2008 5:11 pm ] |
Post subject: | |
<SOLVED> Maybe I was a little quick to say everything is working fine. I have noticed I have a video issue on some of the channels. The reseach I did indicated that it was most likely a cablage problem. I did double check, replace, and move things around with no improvements. I am also still running dual boot with mythbuntu and I don't have the issue there. Symptoms: Certain channels the screen will flicker/jump, like the bottom half will show up in the top half for a second then the middle 1/3 will jump somewhere else. The wierd part is it seems worse on commercials (actually a good thing) and is the worst on PBS. I am guessing it is a problem with the drivers for my PVR, so I will search around for something better/different. I am, however, open to ideas. JJ |
Author: | tjc [ Fri Feb 08, 2008 7:24 pm ] |
Post subject: | |
Did you make the correction noted under Known Issue #4 in the R5F27 Hints? OBTW - It would be helpful if you could fill out the template from the sticky posting: http://mysettopbox.tv/phpBB2/viewtopic.php?t=10955 It makes these recommendations far more useful to other folks looking to follow your "recipe for success". (It also makes it a lot easier to to see if you have affected hardware when you ask the question.) |
Author: | roofchop [ Fri Feb 08, 2008 9:03 pm ] |
Post subject: | |
tjc, you are a wealth of information. I thought I read through all the hints, but I must have missed that. I increased the width to 720, but for some reason I cannot find any options for VBI in that section. I did notice that my picture quality was reduced. I tried doubling the bitrate, but it didn't seem to help. What would be a good recommended bitrate, I pushed it up to 7000, and did really notice, but I will "play" some more. Hopefully turning off the VBI will help when I find it. I edited my first post to match the requested format! Thanks, I think the flickering was giving me motion sickness. JJ |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |