I've had a little trouble so far. I based my hardware selection off the KRP . I used a different case (Antec Sonata II) and I don't have any HD OTA channels available so I went with a Hauppauge PVR-500. Also I upped my HDD to 320GB with WD320SB.
I did a dragon - auto install.
Problems:
1. Can't change channels
Solved by solution discussed here:
http://mysettopbox.tv/phpBB2/viewtopic. ... highlight=
i.e.
Code:
cd /lib/modules/2.6.15-chw-2/kernel/drivers/media/video
mv tveeprom.ko tveeprom.ko.orig
mv tuner.ko tuner.ko.orig
mv tda9887.ko tda9887.ko.orig
2. No sound thru S/PDIF
Solved by solution discussed here:
http://mysettopbox.tv/phpBB2/viewtopic. ... o&start=15I already had disabled the onboard sound thru BIOS.
i.e.
Code:
2] After getting to the point of watching TV, go to Utilities/Setup -> Setup -> General (next, next), and then set audio output device to /dev/adsp (from default of /dev/dsp).
I will update as I push thru all the functionality
Knoppmyth Version: RC5C7
My config:
AMD64 3200+ Venice
Zalman CNPS7000B-ALCU
MSI K8N NEO4 Platinum MB
Corsair PC3200 1GB
WD 3200SB
ASUS N6200TC 64MB
Plextor PX-716A DVD+-RW IDE
Hauppauge PVR-500
Chaintech AV-710
Antec Sonata II Case w/ 450W PSU
Saphire Remote Wonder RF USB
Zalman NB47J