LinHES Forums http://forum.linhes.org/ |
|
R5F1 http://forum.linhes.org/viewtopic.php?f=9&t=15208 |
Page 1 of 1 |
Author: | jayb282 [ Sat May 12, 2007 11:33 pm ] |
Post subject: | R5F1 |
I skipped R5E and just upgraded R5D->R5F. Not bad, but not as successful as last time (Tier 1). P4 3.0ghz + ASUS mb nVidia fx5200 DLink D520(?) 802.11g Two DVICO fusionHDTV DVB-T lite tuner cards MCE remote Dual Layer DVD (LG i think?) Samsung plasma via DVI I hit the following -no madwifi setup. Had to do the config files by hand (automatically worked in R5D). -didn't setup the remote properly. Had to fix hardware.conf by hand (worked in R5D). Running lirc-reconfig.sh didn't fix it. -bunch of scary errors about the restore failing, and some other things. Scrolled by way to fast to catch the details. Would be a nice option for scripts to pause for a key when they hit an error. But at the end the errors didn't seem to matter. -Tried Mytharchive -- fails because no temp directory set. But at least the error is informative so it's easy to fix. Mytharchive is running now , we'll see how it goes. -Tried to rip a DVD - failed. Not much in the way of useful info. Will investigate later. (yes i've installed pineapple). -Like my setup, i'm sure it's getting more common for people to have screens connected via DVI that are autoprobed for their modelines. Would be nice to have a config step where you select a video mode from the probed ones, instead of having to dig around in xorg.conf. -The big scary warning that /dev/hda1 is being formatted and you'll loose everything could possibly be improved. Like telling people they aren't going to lose all their media ![]() -internal DVD player. First attemps were 99% crap. Disks just don't work, seem to lock up, menu crazyness..... Then i tried turning off XvMC. Big improvement. Most work now. Still some menu inconsistencies and weirdness. Some NTSC disks play with a 1 second surge like there's a bad/missing 3:2 pulldown in the playback. Thats all for now. j |
Author: | tjc [ Sun May 13, 2007 8:28 am ] |
Post subject: | Re: R5F1 |
jayb282 wrote: -didn't setup the remote properly. Had to fix hardware.conf by hand (worked in R5D). Running lirc-reconfig.sh didn't fix it. Details? It's really hard to make this stuff more automatic without them. There's also post-install directions in the R5F1 hints and hazards posting about how to restore your old LIRC files... jayb282 wrote: -bunch of scary errors about the restore failing, and some other things. Scrolled by way to fast to catch the details. Would be a nice option for scripts to pause for a key when they hit an error. But at the end the errors didn't seem to matter.
Look in the /var/log/restore.log file. This is also documented in the R5F1 hints and hazards posting. BTW - Could you please fill in the hardware detail template from the sticky posting. Thanks. |
Author: | tjc [ Fri May 25, 2007 6:28 pm ] |
Post subject: | Restore checking false alarms. |
Please see this thread regarding the errors from the restore - http://mysettopbox.tv/phpBB2/viewtopic.php?t=15246 If the differences in your /var/log/restore.log logfile match as described there, you can safely ignore the error. I'm still trying to come up with a good fix for this false alarm. |
Author: | Weavz [ Thu Aug 23, 2007 6:15 am ] |
Post subject: | R5F1 Install |
Let me preface this with <Noob>. I can't find the xorg.conf file. It's not in the directory they say, so I can't edit it. Which, as soon as my system boots, it goes into "Out of Range" for my Television. I'm doing a test run with an older Gateway Destination TV. I know...but if I can use for ANYTHING, I'd keep it till the $$$ comes in to upgrade, till then I'm stuck with it. Basically I know the TV/Monitor won't do anything above 800x600. I can't set the boot option to go into this mode though, because the /etc/X11 directory is not on my system? Again, I'm a Linux noob ![]() ![]() |
Author: | tjc [ Thu Aug 23, 2007 8:06 am ] |
Post subject: | |
- Login as root. There are a number of ways to do this. I'll refer you to the LinuxTips page on the wiki for now. - Enter the following commands: cd /etc/X11/ Remember _case matters_ in Unix/Linux. Next run the command ls -al xorg* The output from those should look something like this: Code: root@black2:~# cd /etc/X11/
root@black2:/etc/X11# ls -al xorg* -rw-r--r-- 1 root root 4389 Apr 14 10:41 xorg.conf -rw-r--r-- 1 root root 13160 Aug 22 23:05 xorg.conf.1st -rw-r--r-- 1 root root 4659 May 8 2006 xorg.conf.in -rw-r--r-- 1 root root 13400 Dec 13 2006 xorg.conf.nvidia.tv.out.sample BTW - You haven't provided much details. Have you installed the latest version (R5F1 at this time)? http://mysettopbox.tv/phpBB2/viewtopic.php?t=13537 Did you follow the R5F1 Hints posting linked in my signature block? What is you hardware like? (Agian detail matters.) |
Author: | Weavz [ Thu Aug 23, 2007 8:45 am ] |
Post subject: | Details |
I was embarrassed to give the details of my computer, but here goes: It's the old Gateway Destination System, Celeron 400 with 384 MB Ram. I have an ATI graphics TV card and DVD rom that I just replaced. Basically I'm using it as our TV, cause for $50, I couldn't find a bigger TV (36" behemoth.) We're going to get a new Flat Panel, so I won't need the computer anymore (only way I can get TV to the Monitor is through the computer) but I would like to have a HTPC and thought I would give it a try on this hardware to learn. It a hard uphill I know. But I just don't have the money to buy new equipment right now and would like to try with what I have. I think the case sensitive thing is what got me...I'll try that at lunch and get back to you. Thanks and don't laugh at my hardware! ![]() |
Author: | mjl [ Thu Aug 23, 2007 5:55 pm ] |
Post subject: | |
Hi, I would suggest that you start a different thread in the main forum somewhere. This area is more reserved for "quicky" status, ie used this and this but had to tweak ... Yours is going to require a bit more care and feeding. I like old hardware, understand the limits and what it can do. Great for learning ![]() Mike |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |