LinHES Forums http://forum.linhes.org/ |
|
R5F27/Intel 845/P4 1.7ghz/Nvidia 5200/PVR-500/Kworld 115 http://forum.linhes.org/viewtopic.php?f=9&t=18178 |
Page 1 of 1 |
Author: | novellahub [ Wed Apr 16, 2008 2:35 pm ] |
Post subject: | R5F27/Intel 845/P4 1.7ghz/Nvidia 5200/PVR-500/Kworld 115 |
# Video type: HDTV / SDTV # Type of system: [Slave back end Only] # Noise level: [I can barely hear it from 5 feet away] # CASE: Generic Beige Desktop case # PSU: Sparkle 350W # MOTHERBOARD: Intel Desktop Board D845GERG2L (mATX) # CPU: P4 1.7 Ghz (Socket 478) # RAM: 512 MB DDR 266 # CPU HEATSINK: Stock Intel # NORTHBRIDGE HEATSINK: Stock # CD/DVD-RW: Lite-On DVD Burner # HDD: 80 GB Hard Drive (Western Digital) # GRAPHICS CARD: Nvidia 5200 AGP # SOUNDCARD: On Board sound (Integrated AC'97 Audio) # TUNER CARD: PVR-500 and Kworld 115 # NIC: D-Link DGE-530T Gigabit Ethernet # REMOTE CONTROL: None Did a stock auto install of R5F27 and had to do a few edits to make it a slave only machine. See this wiki page for more info (I did not to the exports or NFS steps): http://www.knoppmythwiki.org/index.php? ... ckendHowTo Note: My master IP address is 192.168.0.200 and the Slave is 192.168.0.100 From a command line as root: Code: update-rc.d -f mysql remove update-rc.d -f apache remove rm -fr /etc/cron.daily/mythtv-backend nano /etc/mythtv/mysql.txt Code: DBHostName=mythtvmaster DBUserName=mythtv DBPassword=mythtv DBName=mythconverg LocalHostName=mythtvslave Open Xterm: Code: su mythtv-setup
In mythtv-setup: set local ip (default 127.0.0.1) to 192.168.0.100 set master backend ip to 192.168.0.200 setup capture cards See the Kworld 115 wiki page for how to set it up: http://www.knoppmythwiki.org/index.php? ... ld115HowTo After that I rebooted both the master and slave machines (Slave first and then Master). Now I have 6 tuners between two Mythtv machines. |
Author: | novellahub [ Mon Apr 28, 2008 6:59 am ] |
Post subject: | |
Just as a note, all the hardware except the Kworld 115 could be considered Tier 1 if I did not do the slave backend steps. |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |