View unanswered posts    View active topics

All times are UTC - 6 hours





Post new topic Reply to topic  [ 1 post ] 
Print view Previous topic   Next topic  
Author Message
Search for:
PostPosted: Wed Jun 19, 2019 11:00 pm 
Offline
Joined: Sun Nov 09, 2003 8:02 pm
Posts: 40
Location: Escondido CA
LinHES Tier 2 Hardware for LinHES 8.5.x

System Frontend
System: Intel Next Unit of Computing Kit with HDMI, Thunderbolt, Core i3-3217UDC3217BY
Storage: Crucial m4 128GB mSATA Internal Solid State Drive CT128M4SSD3
Memory: Corsair CMSX8GX3M2A1600C9 Vengeance 8GB (2x4GB) DDR3 1600 MHz (PC3 12800) Laptop Memory 1.5V
WiFi: Intel Network 6235AN.HMWWB Centrino WiFi Card Half Mini PCI Express Advanced-N 6235 Dual Band Bluetooth
Power Cord: Cables Unlimted 6-feet Mickey Mouse Power Cord
Tuners: 2 each HDHomeRun Dual Tuners
TV: Over the Air Broadcast

Installed from DVD using a USB Optical Drive

Issues
Hard difficulty setting up WiFi. I set the IP address as a static IP on my network and created a reservation on my router. I used WPA with a passphrase. The install went okay. I was able to configure the wireless adapter during the install, but after the system rebooted, the system wouldn’t obtain an IP address and / or DNS. I opened a terminal after the system booted and kept trying to connect to the backend.
I checked the driver was loaded into the kernel by typing: lspci -k
I checked the status to verify my wlan0 was up and running, by typing ip link set wlan0 up
I verified the firware was loaded by typing: dmesg | grep firmware
Verify the name of the device by typing: iw dev. Mine was wlan0.
Check the link status by typing: iw dev wlan0 link
All of the above was okay, so I scanned for access points by typing: iw dev wlan0 scan | less
It displayed that wlan0 was connected to my access point, but I told it to connect anyway by typing: iw dev wlan0 connect "your_essid"

For some reason I still didn’t have any DNS and couldn’t find any IP addresses on my network. Since I set a reservation on my router, I thought I’d request an IP address from the router. This may reply with DNS and gateway IP addresses, even though I entered this correctly during the install. So I typed: dhcpcd -r “your_IP_address”

This solved the issue. I immediately had internet access and the frontend found the master backend.

This site was very helpful:

https://wiki.archlinux.org/index.php/Wi ... figuration

Thanks so much for everyone’s hard work on creating such a great product. It is so fun to use. I've been using KnoppMyth and LinHES since 2003.

_________________
--Brian
___________________
Backend / Frontend
Intel NUC mini PC kit NUC7i5BNH
Frontend
Intel NUC Mini PC Kit UDC3217BY
Frontend
Giada Mini PC
3 each WeChip Mini Air Mouse
2 - HDHomeRun Dual Tuners
OTA Amplified Antenna
Since 2003


Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 


All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu