Since the upgrade to LinHES 6.0 and higher (now at 7.1) I have two buttons on my silver remote that do not work while watching TV.

The two buttons are Prev-Channel and Channel-UP

If I run irw I see the following:

Looking at the lircd-haupgrey-g3.conf for those buttons I have:

In lircd-haupgrey-g3.txt


All of the other buttons including Channel-Down work correctly. Any suggestions? They all worked in 5.5 I'm stumped.

Just a thought but what if you remove the "remote" line in what looks like your lircrc? It is not necessary unless you have multiple remotes. It shouldn't do anything but worth a test.

Also what is the exact path of the files you are referencing. I think "lircd-haupgrey-g3.txt" should actually be "/usr/MythVantage/templates/remotes/hauppauge-silver/lircrc-haupgrey-g3.txt"

If you see the output from irw, then it should be mapping to the lircrc entries properly. The only other thing that comes to mind is if the key bindings in mythtv do not map to "H" and "Up". These are somewhere in the mythtv settings menus.

Also double check that /etc/lirc/lircrc and /etc/lirc/lircd.conf contain an include to the paths of the files you are referencing. I'm writing those path names from memory so they may not be exactly right but it will be close.

Christ,

Thanks for the suggestions. I'm out of town at the moment but will check it out this weekend and then let you know how I make out. I only have the one remote so we shall see.

Tim

I decided that before trying to resolve the remote problem I might as well upgrade to the latest version. So last night
I did an update from 7.1 to 7.2 everything seems to be working "Except" my remote.

I'm using a PVR 350 reciever and a Hauppauge silver remote.

The symptom looks like it's processing multiple signals for each key press but I'm not sure. When going down the menu it jumps 2 lines for a single key.

The output from ir-keytable looks like this.

and the uevent file from /sys/class/rc/rc0 looks like this:

What I don't see is "Repeat delay = 500 ms, repeat period = 33 ms" as referenced in
http://linhes.org/projects/linhes/wiki/ ... tomization, but then I'm not sure

(Maybe I'm missing a Repeat delay, can I add this to the "uevent" file? )

I also get no output from ir-keytable -t even after I stop the svc, I do get feed back from irw. A single key press from a menu looks like this:
If I select a number on the keypad while watching TV I get:
for the number 2.

A single volume up reports:


And a single volume down reports:



Tim

Ok after checking my lircd.conf and lircrc file both contained a double entry for the include file. SO that parts resolved.

I also commented out the remote line out of the "/usr/MythVantage/templates/remotes/hauppauge-silver/lircrc-haupgrey-g3.txt" That didn't help either.

I did notice that there was no repeat specified for that key so added it. And what do you know its now working. Thanks to christ for pointing me in the right direction.

Tim