Author |
Message |
brfransen
|
Posted: Sat May 14, 2016 5:00 pm |
|
Joined: Fri Jul 21, 2006 11:12 pm
Posts: 1194
Location:
SC
|
that is up to you but you could have the same problem again since you are using a custom xorg.
One thing to try: in /etc/systeconfig change XIgnoreConfig="1" to XIgnoreConfig="0" run sudo xconfig.sh restart the frontend sudo sv restart frontend if MythFrontend/OSD/mythtv-setup work go into LinHES Settings > Display and uncheck User Supplied Configuration
|
|
Top |
|
![](images/spacer.gif) |
mattbatt
|
Posted: Sat May 14, 2016 5:46 pm |
|
Joined: Tue Aug 15, 2006 11:14 am
Posts: 1343
Location:
Orlando FL
|
I don't remember why I am using a custom xorg. I guess I'll find out the hard way.
_________________ My System
|
|
Top |
|
![](images/spacer.gif) |
mattbatt
|
Posted: Sat May 14, 2016 6:07 pm |
|
Joined: Tue Aug 15, 2006 11:14 am
Posts: 1343
Location:
Orlando FL
|
OK well that did something this time It did break my overscan fix but I can fix that again. Unfortunately All I can see is the bubble background and the LInHES logo. I ran a Pacman -Syu again and it found two updates so I did them. I swear those weren't there yesterday. Code: [mythtv@gimli ~]$ sudo xconfig.sh Detected NVIDIA as the video card type Checking for nvidia in cache or online Checking for nvidia-libgl in cache or online Checking for nvidia-utils in cache or online Checking for opencl-nvidia in cache or online Installing current nvidia driver Setting modeline to 1920x1080 Running plymouth_config [mythtv@gimli ~]$ sudo sv restart frontend timeout: finish: frontend: (pid 12378) 424s [mythtv@gimli ~]$ sudo pacman -Syu :: Synchronizing package databases... core 166.1 KiB 1038K/s 00:00 [########################################################################] 100% extra 104.9 KiB 1665K/s 00:00 [########################################################################] 100% :: Starting full system upgrade... resolving dependencies... looking for conflicting packages...
Package (2) Old Version New Version Net Change Download Size
core/LinHES-config 8.4-7 8.4-8 0.00 MiB 0.30 MiB core/mythinstall 8.4-3 8.4-4 0.00 MiB 0.36 MiB
Total Download Size: 0.66 MiB Total Installed Size: 1.59 MiB Net Upgrade Size: 0.00 MiB
:: Proceed with installation? [Y/n] y :: Retrieving packages... LinHES-config-8.4-8-x86_64 307.3 KiB 1397K/s 00:00 [########################################################################] 100% mythinstall-8.4-4-x86_64 367.1 KiB 1748K/s 00:00 [########################################################################] 100% (2/2) checking keys in keyring [########################################################################] 100% (2/2) checking package integrity [########################################################################] 100% (2/2) loading package files [########################################################################] 100% (2/2) checking for file conflicts [########################################################################] 100% :: Processing package changes... (1/2) upgrading LinHES-config [########################################################################] 100% warning: directory permissions differ on /etc/ filesystem: 775 package: 755 warning: directory permissions differ on /usr/bin/ filesystem: 775 package: 755 *TEMPLATES is not defined *using default value ____Start of IR____ Trying to link /usr/MythVantage/templates/remotes/favorites/streamzap/lircd.conf.streamzap -> /etc/lirc/lircd.conf.d/remote_lircd.conf Setting up lirc for Kodi Trying to link /usr/MythVantage/templates/remotes/favorites/streamzap/Lircmap.xml -> /home/mythtv/.kodi/userdata/Lircmap.xml Setting up lirc for PlexHT Trying to link /usr/MythVantage/templates/remotes/favorites/streamzap/Lircmap.xml -> /home/mythtv/.plexht/userdata/Lircmap.xml Adding service remotes Adding service irexec Configuring receiver streamzap Removing service igdaemon stop service igdaemon Removing service tatir stop service tatir HostBlasterType : None Triggering udev Disabling LCD support Removing service lcdd stop service lcdd __End IR
____Start of vnc config ____ Installing vnc system
____Start of vnc setup____ Checking tigervnc for install tigervnc is already installed, will not install couldn't create vnc dir:/home/vncsvc/.vnc * vncsvc not found Trying to link /home/mythtv/.mythtv -> /home/vncsvc/.mythtv /home/vncsvc/.mythtv is present, skipping... Writing out password __End of vnc
Adding service vnc Installing x11vnc system
Checking x11vnc for install x11vnc is already installed, will not install Adding service xvnc __End of vnc
____Start of locale/lang config ____ locale is: en_US.UTF-8 Generating locales Updating /etc/locale.conf Removing pts and shm from fstab... (2/2) upgrading mythinstall [########################################################################] 100% [mythtv@gimli ~]$
_________________ My System
|
|
Top |
|
![](images/spacer.gif) |
brfransen
|
Posted: Sat May 14, 2016 6:26 pm |
|
Joined: Fri Jul 21, 2006 11:12 pm
Posts: 1194
Location:
SC
|
Those were just pushed up this afternoon. What did xconfig give you when you ran it? Open an xterm and run mythfrontend. What does it give?
|
|
Top |
|
![](images/spacer.gif) |
mattbatt
|
Posted: Sat May 14, 2016 7:19 pm |
|
Joined: Tue Aug 15, 2006 11:14 am
Posts: 1343
Location:
Orlando FL
|
Thank you for your help Bfransen, Sorry I have been sporadically online tonight, Sick kid. OK so it looks like there is definitely some blockage with OpenGL I had no way to copy paste the results from the LinHES box so I had to pipe the command into text file. It did not write the OpenGL errors into the text file so I retyped them where they occurred naturally. Code: 2016-05-14 21:08:08.623462 I Setup Interrupt handler 2016-05-14 21:08:08.623507 I Setup Terminated handler 2016-05-14 21:08:08.623518 I Setup Segmentation fault handler 2016-05-14 21:08:08.623525 I Setup Aborted handler 2016-05-14 21:08:08.623534 I Setup Bus error handler 2016-05-14 21:08:08.623542 I Setup Floating point exception handler 2016-05-14 21:08:08.623553 I Setup Illegal instruction handler 2016-05-14 21:08:08.623562 I Setup Real-time signal 0 handler 2016-05-14 21:08:08.623573 I Setup User defined signal 1 handler 2016-05-14 21:08:08.623579 I Setup User defined signal 2 handler 2016-05-14 21:08:08.623587 I Setup Hangup handler 2016-05-14 21:08:08.623724 C mythfrontend version: fixes/0.28 [v28.0-23-g370dd71] www.mythtv.org 2016-05-14 21:08:08.623734 C Qt version: compile: 5.5.1, runtime: 5.5.1 2016-05-14 21:08:08.623740 N Enabled verbose msgs: general 2016-05-14 21:08:08.623763 N Setting Log Level to LOG_INFO 2016-05-14 21:08:08.635303 N Using runtime prefix = /usr 2016-05-14 21:08:08.635320 N Using configuration directory = /home/mythtv/.mythtv 2016-05-14 21:08:08.635350 I Added logging to the console 2016-05-14 21:08:08.635445 I Assumed character encoding: en_US.UTF-8 2016-05-14 21:08:08.636128 N Empty LocalHostName. 2016-05-14 21:08:08.636140 I Using localhost value of gimli 2016-05-14 21:08:08.658478 N Setting QT default locale to EN_US 2016-05-14 21:08:08.658499 I Current locale EN_US 2016-05-14 21:08:08.658569 N Reading locale defaults from /usr/share/mythtv//locales/en_us.xml 2016-05-14 21:08:08.678345 I Starting process manager 2016-05-14 21:08:08.678382 I Starting process signal handler 2016-05-14 21:08:08.678541 I Starting IO manager (write) 2016-05-14 21:08:08.678576 I Starting IO manager (read) 2016-05-14 21:08:08.729793 I ScreenSaverX11Private: DPMS is disabled. 2016-05-14 21:08:08.758552 N Desktop video mode: 1920x1080 60.053 Hz 2016-05-14 21:08:08.860248 E Failed listening on TCP 127.0.0.1:6547 - Error 8: The bound address is already in use 2016-05-14 21:08:08.860278 E MediaRenderer: HttpServer Create Error 2016-05-14 21:08:08.871443 I Loading en_us translation for module mythfrontend 2016-05-14 21:08:08.881060 I LIRC: Successfully initialized '/var/run/lirc/lircd' using '/home/mythtv/.mythtv/lircrc' config 2016-05-14 21:08:08.881708 I No joystick configuration found, not enabling joystick control 2016-05-14 21:08:08.961975 E CECAdapter: Failed to find any CEC devices. 2016-05-14 21:08:08.962370 I CECAdapter: Closing down CEC. 2016-05-14 21:08:08.962396 I UDPListener: Enabling 2016-05-14 21:08:08.963108 I Binding to UDP 127.0.0.1:6948 2016-05-14 21:08:08.963143 I Binding to UDP 192.168.0.164:6948 2016-05-14 21:08:08.963169 I Binding to UDP [::1]:6948 2016-05-14 21:08:08.963268 I Binding to UDP [fe80::20a:cdff:fe24:d8f1%eth0]:6948 2016-05-14 21:08:08.963299 I Binding to UDP 192.168.0.255:6948 2016-05-14 21:08:08.991973 I Using Frameless Window 2016-05-14 21:08:08.991979 I Using Full Screen Window Could Not initialize OpenGL for RasterGLSurface, reverting to RasterService. 2016-05-14 21:08:09.100712 I UI Screen Resolution: 1920 x 1080 2016-05-14 21:08:09.261678 I OpenGL: Sync to VBlank is enabled (good!) Could not Initilize OpenGL Handling Aborted Aborted (core dumped)
_________________ My System
|
|
Top |
|
![](images/spacer.gif) |
mattbatt
|
Posted: Sun May 15, 2016 7:58 pm |
|
Joined: Tue Aug 15, 2006 11:14 am
Posts: 1343
Location:
Orlando FL
|
Well this sucks. I tried installing from ISO but it gets stuck in the same place with the fat penguin and the bubbles. I tried running mythtv-setup in the live boot and it gives me the same openGL errors as listed above.
I also tried installing to a VM and got nowhere. Yes I checked the MD5 hash.
_________________ My System
|
|
Top |
|
![](images/spacer.gif) |
mattbatt
|
Posted: Sun May 15, 2016 8:27 pm |
|
Joined: Tue Aug 15, 2006 11:14 am
Posts: 1343
Location:
Orlando FL
|
OK I have a clue as to why I can't upgrade with the ISO. I'm not sure what exactly this means but when I try to install the ISO in Virtualbox. the first desktop image is of a holly leaf inside a globe or something. On my MythBox it's the same old blue background with the greenish circles all over the place. Is the Live CD (usb) pulling settings from my installed drive? If so that makes fixing catastrophic problems really hard.
_________________ My System
|
|
Top |
|
![](images/spacer.gif) |
RacerX
|
Posted: Sun May 15, 2016 8:29 pm |
|
Joined: Sun Sep 05, 2004 7:06 pm
Posts: 690
|
What model video card are you trying?
|
|
Top |
|
![](images/spacer.gif) |
mattbatt
|
Posted: Sun May 15, 2016 8:43 pm |
|
Joined: Tue Aug 15, 2006 11:14 am
Posts: 1343
Location:
Orlando FL
|
My specs Nvdia GT430 HDHR 2 tuner, AMD Athlon II X2 240, 4 gB of ram,
_________________ My System
|
|
Top |
|
![](images/spacer.gif) |
RacerX
|
Posted: Sun May 15, 2016 9:06 pm |
|
Joined: Sun Sep 05, 2004 7:06 pm
Posts: 690
|
Matt I'm using Nvida ION, The driver is Nvidia 340.96 Your card the GeForce GT 430 is supported by the driver The process is Linhes boots with the Linhes logo and then it drops down, then there is a 30 second wait for the desktop to appear with a butterfly inside of a glass ball. The picture is really awesome and takes some resources. If you can try setting it up with a monitor instead of a TV. It is always easier that way. Opengl GLX has a lot of settings that show up in Code: Nvida-settings
|
|
Top |
|
![](images/spacer.gif) |
mattbatt
|
Posted: Sun May 15, 2016 10:44 pm |
|
Joined: Tue Aug 15, 2006 11:14 am
Posts: 1343
Location:
Orlando FL
|
I wasn't trying to diss on the new picture. I'm just trying to say that the upgrade that automatically installed itself is botched and the iso on a thumb drive is pulling settings from the botched install. I am also remembering that the LinHES install disk can't actually wipe a drive from the GUI. I had to format the drive with Gparted first before I could install. According to the Nvidia website the appropriate driver for my card is the 361.42 http://www.nvidia.com/download/driverRe ... 1423/en-usLinHES has installed Nvidia.364.16-3 is the installed driver. Just for kicks I tried to install the 340.xx driver but the dependencies wouldn't allow me to. Well I wiped the first partition on my secondary drive, unpluged my primary drive and just tried to install from the USB and I got the exact same thing. GRUMBLE GRUMBLE I might have to pull a backup from a few days ago and install 8.3 just to get everything back. The backend is running fine, the frontend is just eating up the CPU by constantly trying to start that thing.
_________________ My System
|
|
Top |
|
![](images/spacer.gif) |
brfransen
|
Posted: Mon May 16, 2016 6:42 am |
|
Joined: Fri Jul 21, 2006 11:12 pm
Posts: 1194
Location:
SC
|
Booting from the ISO does not pull any settings from any drive until the setup is run, a drive selected and then it only does if you select an Upgrade. You can verify right after booting the ISO by running df and seeing that there are no mounts other than off the ISO. Since the installer is not running you are not getting to that point. I believe what we have here is some problem with your video card and the nVidia driver since you are having the same problem in the ISO as well as your install. Both ISO and install use xconfig.sh to select and install the driver. The odd part is your 430 is supported by the 364.19 driver. http://us.download.nvidia.com/XFree86/L ... chips.html It is also supported by the 340 driver: http://us.download.nvidia.com/XFree86/L ... chips.html Try forcing the install of the 340 driver as show http://linhes.org/projects/linhes/wiki/ ... #xconfigsh Code: sudo VGACARDTYPE="nvidia-340xx" xconfig.sh
|
|
Top |
|
![](images/spacer.gif) |
RacerX
|
Posted: Mon May 16, 2016 10:19 am |
|
Joined: Sun Sep 05, 2004 7:06 pm
Posts: 690
|
Matt
The first time i used it testing it was a bit of a surprise, The desktop graphic was really impressive, I could see the packages needed to be updated. Some of them are really old and did not meet the dependency for Firefox. I noticed a little lag so I upgraded to 4gb. Performance improved so I stayed with it. I am not using a remote. To narrow it down I recommend another test. This one is super limited. On a spare drive, full install the PC, use a monitor. Do not connect your remote or USB. See if that works. You can also download and try Knoppix cd it has a light load and works well for testing (it has GParted in it).
|
|
Top |
|
![](images/spacer.gif) |
mattbatt
|
Posted: Mon May 16, 2016 12:23 pm |
|
Joined: Tue Aug 15, 2006 11:14 am
Posts: 1343
Location:
Orlando FL
|
Thanks RacerX, I used a mint live USB and it worked great. I tried to install to the first partition of my second drive and it didn't work. I realized it was my mistake the caused the VM to not install correctly. I forgot to "eject" the ISO before restarting the VM and then I quit the install somehow this left the boot "drive" read only. Brfransen I ran that command and I got these results Code: [mythtv@gimli ~]$ sudo VGACARDTYPE="nvidia-340xx" xconfig.sh Video card type forced to nvidia-340xx Checking for nvidia-340xx in cache or online Checking for nvidia-340xx-libgl in cache or online Checking for nvidia-340xx-utils in cache or online Checking for opencl-nvidia-340xx in cache or online Installing nvidia-340xx driver Setting modeline to 1920x1080 Running plymouth_config [mythtv@gimli ~]$
AND after a reboot it upgraded the Database and everything is working perfectly. Thanks to both of you. I guess I am still a Linux Noob. ![Laughing :lol:](./images/smilies/icon_lol.gif)
_________________ My System
|
|
Top |
|
![](images/spacer.gif) |
brfransen
|
Posted: Mon May 16, 2016 1:07 pm |
|
Joined: Fri Jul 21, 2006 11:12 pm
Posts: 1194
Location:
SC
|
Glad it is working. I am still concerned that regular nvidia driver wasn't working as nvidia says it clearly should. That also means that a ISO install for you won't work. What is your video card device ID? Code: lspci | grep -i nvidia 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) Then take what ever for you is the first numbers and put it in the grep quotes: Code: lspci -n | grep '01:00.0' 01:00.0 0300: 10de:0a20 (rev a2)
|
|
Top |
|
![](images/spacer.gif) |