A415-HPG
0904  016310

#
# this config file was automatically generated
# using lirc-0.7.0(any) on Sun Nov 28 20:25:09 2004
#
# contributed by
#
# brand:   Hauppauge 350
# Created: G.J. Werler (The Netherlands)
# Project: Mythtv Fedora Pundit-R www.mythtvportal.com
# Date:    2004/11/28
# model no. of remote control: Hauppauge A415-HPG
# devices being controlled by this remote: PVR-350
#

begin remote

  name  Hauppauge_350
  bits           13
  flags RC5|CONST_LENGTH
  eps            30
  aeps          100

  one           969   811
  zero          969   811
  plead        1097
  gap          114605
  toggle_bit      2


      begin codes
          Go                       0x00000000000017BB
          Power                    0x00000000000017BD
          TV                       0x000000000000179C
          Videos                   0x0000000000001798
          Music                    0x0000000000001799
          Pictures                 0x000000000000179A
          Guide                    0x000000000000179B
          Radio                    0x000000000000178C
          Up                       0x0000000000001794
          Left                     0x0000000000001796
          Right                    0x0000000000001797
          Down                     0x0000000000001795
          OK                       0x00000000000017A5
          Back/Exit                0x000000000000179F
          Menu/i                   0x000000000000178D
          Vol+                     0x0000000000001790
          Vol-                     0x0000000000001791
          Prev.Ch                  0x0000000000001792
          Mute                     0x000000000000178F
          Ch+                      0x00000000000017A0
          Ch-                      0x00000000000017A1
          Record                   0x00000000000017B7
          Stop                     0x00000000000017B6
          Rewind                   0x00000000000017B2
          Play                     0x00000000000017B5
          Forward                  0x00000000000017B4
          Replay/SkipBackward      0x00000000000017A4
          Pause                    0x00000000000017B0
          SkipForward              0x000000000000179E

          1                        0x0000000000001781
          2                        0x0000000000001782
          3                        0x0000000000001783
          4                        0x0000000000001784
          5                        0x0000000000001785
          6                        0x0000000000001786
          7                        0x0000000000001787
          8                        0x0000000000001788
          9                        0x0000000000001789
          Asterix                  0x000000000000178A
          0                        0x0000000000001780
          #                        0x000000000000178E
          Red                      0x000000000000178B
          Green                    0x00000000000017AE
          Yellow                   0x00000000000017B8
          Blue                     0x00000000000017A9
      end codes

end remote

# lircrc.example.HauppaugeSilver-nativelirc
# 2005-01-27, Russell Salerno
# mailto:rsalern5@optonline.net
# Save this file in ~/.mythtv/lircrc

begin
    prog = mythtv
    button = Off
    config = Esc
end

begin
    prog = mythtv
    button = Go
# Swap the PiP windows
    config = N
end

begin
    prog = mythtv
    button = 1
    config = 1
end

begin
    prog = mythtv
    button = 2
    config = 2
end

begin
    prog = mythtv
    button = 3
    config = 3
end

begin
    prog = mythtv
    button = 4
    config = 4
end

begin
    prog = mythtv
    button = 5
    config = 5
end

begin
    prog = mythtv
    button = 6
    config = 6
end

begin
    prog = mythtv
    button = 7
    config = 7
end

begin
    prog = mythtv
    button = 8
    config = 8
end

begin
    prog = mythtv
    button = 9
    config = 9
end

begin
    prog = mythtv
    button = Back/Exit
    config = Esc
end

begin
    prog = mythtv
    button = 0
    config = 0
end

begin
    prog = mythtv
    button = menu/i
    config = M
end

# Below are keys used with the Hauppauge Silver remote

begin
   prog = mythtv
# This is the Red key
# We'll use it for "Delete"
   button = Red
   config = D
end

begin
   prog = mythtv
# This is the Green key
# We'll use it for "Information"
   button = Green
   config = I
end

begin
  prog = mythtv
# This is the Blue key
# Use it for the sleep timer
  button = Blue
  config = F8
end

begin
  prog = mythtv
# This is the Yellow key
# adjust video
  button = Yellow
  config = F
end


# Note the "repeat =" strings in the volume and channel.
# This means that if you hold down the key, every nth instance will be
# passed.  This depends on your system, so you may want to increase or
# decrease this and see what happens.  repeat = 1 is probably too
# fast.

begin
  prog = mythtv
  button = vol-
  repeat = 3
  config = F10
end

begin
  prog = mythtv
  button = vol+
  repeat = 3
  config = F11
end

begin
  prog = mythtv
  button = Ch+
  config = Up
end

begin
  prog = mythtv
  button = Ch-
  repeat = 3
  config = Down
end

begin
    prog = mythtv
    button = Up
# This is the "up" on the central diamond
    repeat = 3
    config = Up
end

begin
    prog = mythtv
    button = Down
# This is the "down" on the central diamond
    repeat = 3
    config = Down
end

begin
    prog = mythtv
#    button = Vol-
    button = Left
# This is the "left" on the central diamond
    repeat = 3
    config = Left
end

begin
    prog = mythtv
#    button = Vol+
    button = Right
# This is the "right" on the central diamond
    repeat = 3
    config = Right
end

begin
    prog = mythtv
# Middle button on the diamond
    button = Ok
    config = Return
end

begin
    prog = mythtv
    button = Mute
    config = F9
end

begin
   prog = mythtv
# Change focus for PiP (to change channel in the other window)
   button = Blank
   config = B
end

begin
   prog = mythtv
# Toggle PiP on/off
   button = Full
   config = V
end

begin
    prog = mythtv
    button = Rew
    config = Left
end

begin
    prog = mythtv
    button = Play
    config = P
end

begin
    prog = mythtv
    button = FFW
    config = Right
end

begin
  prog = mythtv
  button = Record
  config = R
end

begin
   prog = mythtv
# Teletext
   button = Stop
   config = T
end

begin
    prog = mythtv
    button = pause
    config = P
end

begin
   prog = mythtv
   button = Replay
# Use for backwards commercial skip
    config = Q
end

begin
   prog = mythtv
   button = Skip
# Use for forward commercial skip
    config = Z
end

#MPlayer
begin
   prog = mplayer
   button = Off
   config = quit
end

begin
   prog = mplayer
   button = MENU
   config = osd
end

begin
   prog = mplayer
   button = Rew
   config = seek -10
   repeat = 1
end

begin
   prog = mplayer
   button = FFW
   config = seek +10
   repeat = 1
end

begin
   prog = mplayer
   button = Replay
   config = seek -60
   repeat = 1
end

begin
   prog = mplayer
   button = Skip
   config = seek +60
   repeat = 1
end

begin
    prog = mplayer
    button = Pause
    config = pause
end

begin
    prog = mplayer
    button = Play
    config = pause
end

begin
   prog = mplayer
   button = BACK
   config = quit
end

begin
   prog = mplayer
   button = VOL+
   config = volume +1
   repeat = 1
end

begin
   prog = mplayer
   button = VOL-
   config = volume -1
   repeat = 1
end

begin
   prog=mplayer
   button=Mute
   config=mute
end

# ~/.mythtv/lircrc
#
# MythTV native LIRC config file for
# the grey Hauppauge remote
#
# By Jarod Wilson, 2003/12/21
# Amalgamated from Jeff Campbell's,
# .lircrc, the mythtv.org docs, and
# a few touches of my own. :)
#
# Additional commands and fixes
# by Brian Pilnick 2005/1/15
#

# Channel Up
begin
prog = mythtv
button = Channel-UP
repeat = 3
config = Up
end

# Channel Down
begin
prog = mythtv
button = Channel-DOWN
repeat = 3
config = Down
end

# Volume Up
begin
prog = mythtv
button = Volume-UP
repeat = 3
config = ]
end

# Volume Down
begin
prog = mythtv
button = Volume-DOWN
repeat = 3
config = [
end

# OK/Select
begin
prog = mythtv
button = OK
config = Space
end

# Play
begin
prog = mythtv
button = Play
config = Return
end

# Stop
begin
prog = mythtv
button = Stop
config = Esc
end

# Escape/Exit/Back
begin
prog = mythtv
button = Back-Exit
config = Esc
end

# Power Off/Exit
begin
prog = mythtv
button = Power
config = Esc
end

# Red means stop!
#begin
#prog = mythtv
#button = red
#config = Esc
#end

# Pause
begin
prog = mythtv
button = Pause
repeat = 3
config = P
end

# Mute
begin
prog = mythtv
button = Mute
repeat = 3
config = F9
end

begin
prog = mythtv
button = UP
repeat = 3
config = Up
end

begin
prog = mythtv
button = RIGHT
repeat = 3
config = Right
end

begin
prog = mythtv
button = DOWN
repeat = 3
config = Down
end

begin
prog = mythtv
button = LEFT
repeat = 3
config = Left
end

# Rewind
# Scroll EPG Left one page
begin
prog = mythtv
button = Rewind
repeat = 3
config = <
end

# Fast forward
# Scroll EPG right one page
begin
prog = mythtv
button = Forward
repeat = 3
config = >
end

# Skip forward (10 min default)
# Scroll EPG down one page
begin
prog = mythtv
button = Next
repeat = 3
config = PgDown
end

# Skip backward (10 min default)
# Scroll EPG up one page
begin
prog = mythtv
button = Previous
repeat = 3
config = PgUp
end

# Record
begin
prog = mythtv
button = Record
repeat = 3
config = R
end

# Delete
begin
prog = mythtv
button = red
repeat = 3
config = D
end

# Previous Channel
begin
prog = mythtv
button = Prev-Channel
repeat = 3
config = H
end

# OSD browse (allows channel scrolling from OSD while keeping current channel)
# While watching a recording, brings up Options
begin
prog = mythtv
button = green
repeat = 3
config = O
end

# Display EPG while in live TV,
# View selected show while in EPG
# While in a recording, enters editing mode
begin
prog = mythtv
button = Menu
repeat = 3
config = M
end

# Display EPG while in live TV,
# View selected show while in EPG
# While in a recording, enters editing mode
begin
prog = mythtv
button = Guide
repeat = 3
config = M
end

# Bring up OSD info
# In EPG or recordings menu, brings up show info and recording options
begin
prog = mythtv
button = Go
repeat = 3
config = I
end

# Change display aspect ratio
#begin
#prog = mythtv
#button = FULL
#repeat = 3
#config = W
#end

# Move EPG back one day
# Seek to previous commercial cut point
begin
prog = mythtv
button = yellow
repeat = 3
config = Home
end

# Move EPG foward one day
# Seek to next commercial cut point
begin
prog = mythtv
button = blue
repeat = 3
config = End
end

# Numbers 0-9

begin
prog = mythtv
button = 0
repeat = 3
config = 0
end

begin
prog = mythtv
button = 1
repeat = 3
config = 1
end

begin
prog = mythtv
button = 2
repeat = 3
config = 2
end

begin
prog = mythtv
button = 3
repeat = 3
config = 3
end

begin
prog = mythtv
button = 4
repeat = 3
config = 4
end

begin
prog = mythtv
button = 5
repeat = 3
config = 5
end

begin
prog = mythtv
button = 6
repeat = 3
config = 6
end

begin
prog = mythtv
button = 7
repeat = 3
config = 7
end

begin
prog = mythtv
button = 8
repeat = 3
config = 8
end

begin
prog = mythtv
button = 9
repeat = 3
config = 9
end


### MPlayer lirc setup

# Mplayer Volume Up
begin
prog = mplayer
button = Volume-UP
repeat = 1
config = volume 1
end

# Mplayer Volume Down
begin
prog = mplayer
button = Volume-DOWN
repeat = 1
config = volume -1
end

# Show OSD
begin
prog = mplayer
button = Menu
repeat = 3
config = osd
end

# Pause playback
begin
prog = mplayer
button = Pause
repeat = 3
config = pause
end

# Skip ahead a minute if playing
# If paused, resume playing
begin
prog = mplayer
button = Play
repeat = 3
config = seek +1
end

# Stop playback and exit
begin
prog = mplayer
button = Stop
repeat = 3
config = quit
end

# Mute
begin
prog = mplayer
button = Mute
repeat = 3
config = mute
end

# Seek back 10 seconds
begin
prog = mplayer
button = Rewind
repeat = 3
config = seek -10
end

# Seek forward 30 seconds
begin
prog = mplayer
button = Forward
repeat = 3
config = seek +30
end

# Quit
begin
prog = mplayer
button = Back-Exit
repeat = 3
config = quit
end

# Seek forward 10 minutes
begin
prog = mplayer
button = Next
repeat = 3
config = seek +600
end

# Seek backward 10 minutes
begin
prog = mplayer
button = Previous
repeat = 3
config = seek -600
end

# Toggle full-screen
#begin
#prog = mplayer
#button = FULL
#repeat = 3
#config = vo_fullscreen
#end