LinHES Forums • View topic - Blank Screen on "Watch TV" and "Watch Recordi

Board index KnoppMyth General

All times are UTC - 6 hours

Blank Screen on "Watch TV" and "Watch Recordi

Page 1 of 2

[ 26 posts ]

Go to page 1, 2 Next

Print view

Previous topic Next topic

Author

Message

markm

Post subject: Blank Screen on "Watch TV" and "Watch Recordi

Posted: Tue Oct 05, 2004 4:22 pm

Joined: Fri Jun 11, 2004 3:33 pm

Posts: 9

Hello,
I've had Mythtv running for about 3 months and managed to get everything working OK. A few weeks ago upgraded to 0.16. and followed the walk through here
http://mysettopbox.tv/phpBB2/viewtopic.php?t=2495&postdays=0&postorder=asc&start=0

Since then I have been unable to watch 'Live TV' or 'Watch Recording' of any of the recorded programmes.

I can watch DVDs on the Myth box and I can copy recorded programs and watch them on a networked Windows machine. So I assume the video drivers and tuner are working correctly.

Once I watch live TV, I can't seem to get back into Myth and have to re-boot the box via PuTTY.

I've looked at the logs

Code:

2004-09-29 23:15:42 mythfrontend version: 0.16.20040906-1 www.mythtv.org
2004-09-29 23:15:42 Enabled verbose msgs : important general
2004-09-29 23:15:43 Registering Internal as a media playback plugin.
2004-09-29 23:15:43 Registering MythDVD DVD Media Handler as a media handler
2004-09-29 23:15:43 Registering MythDVD VCD Media Handler as a media handler
2004-09-29 23:15:43 Registering MythMusic Media Handler as a media handler
2004-09-29 23:15:44 Mediamonitor: Adding /dev/cdrom
2004-09-29 23:15:44 Mediamonitor: Adding /dev/dvd
2004-09-29 23:15:44 Starting media monitor.
2004-09-29 23:15:54 Connecting to backend server: 127.0.0.1:6543 (try 1 of 5)
2004-09-29 23:15:54 Using protocol version 13
2004-09-29 23:15:54 Using protocol version 13
2004-09-29 23:15:54 Using protocol version 13
2004-09-29 23:15:57 Opening OSS audio device '/dev/dsp'.
2004-09-29 23:15:57 Audio fragment size: 4096
2004-09-29 23:15:57 Using XV port 53
2004-09-29 23:15:57 Changing from None to WatchingLiveTV
2004-09-29 23:15:58 Using realtime priority.

I've searched 'til I'm blue in the face and exhausted the patience of a Linux (but not Myth) guru I work with.

I only use the monitor output. I'm in the UK. It's a Shuttle SN41G2 with a PVR250.

If there are any pointers or help I would truly appreciate it.
regards
Mark.

_________________
M10000 and PVR 250

Top

Xsecrets

Post subject:

Posted: Tue Oct 05, 2004 4:26 pm

Joined: Mon Oct 06, 2003 10:38 am

Posts: 4978

Location: Nashville, TN

well first you've got to find the problem. there were no errors in that log. look in the /var/log/messages file and the /var/log/mythtv/mythbackend file, and if neccesary the /var/log/syslog also you may not have to reboot if you can get in with putty. so next time run mythfrontend from a terminal, and if it locks up get in with putty and do killall mythfrontend which should kill the myth interface and leave you with an xterm with some erros in it.

_________________
Have a question search the forum and have a look at the KnoppMythWiki.

Xsecrets

Top

markm

Post subject:

Posted: Tue Oct 05, 2004 4:49 pm

Joined: Fri Jun 11, 2004 3:33 pm

Posts: 9

Thank you for the quick reply and at the risk of trying to take advantage of this here's the Mythbackend log file

Code:

2004-10-05 07:29:42 Found changes in the todo list.
2004-10-05 07:29:42 Scheduled 2 items in 0.016099 seconds.
2004-10-05 13:24:54 MainServer::HandleAnnounce Playback
2004-10-05 13:24:54 adding: mythtv as a client (events: 0)
2004-10-05 13:34:38 Found changes in the todo list.
2004-10-05 13:34:38 Scheduled 2 items in 0.015096 seconds.
2004-10-05 13:41:20 MainServer::HandleAnnounce Playback
2004-10-05 13:41:20 adding: mythtv as a client (events: 0)
2004-10-05 13:41:26 MainServer::HandleAnnounce Playback
2004-10-05 13:41:26 adding: mythtv as a client (events: 0)
2004-10-05 13:41:33 MainServer::HandleAnnounce Playback
2004-10-05 13:41:33 adding: mythtv as a client (events: 0)
2004-10-05 13:45:57 Found changes in the todo list.
2004-10-05 13:45:57 Scheduled 4 items in 0.016008 seconds.
2004-10-05 14:00:08 MainServer::HandleAnnounce Playback
2004-10-05 14:00:08 adding: mythtv as a client (events: 0)
2004-10-05 14:00:19 MainServer::HandleAnnounce Playback
2004-10-05 14:00:19 adding: mythtv as a client (events: 0)
2004-10-05 14:00:33 MainServer::HandleAnnounce Playback
2004-10-05 14:00:33 adding: mythtv as a client (events: 0)
2004-10-05 23:33:13 MainServer::HandleAnnounce Playback
2004-10-05 23:33:13 adding: mythtv as a client (events: 0)
2004-10-05 23:33:13 MainServer::HandleAnnounce Playback
2004-10-05 23:33:13 adding: mythtv as a client (events: 0)
2004-10-05 23:33:13 adding: mythtv as a remote ringbuffer
2004-10-05 23:33:13 Changing from None to WatchingLiveTV

and here's the messages log

Code:

Oct  5 23:33:13 mythtv kernel: saa7115[0]: decoder set size
Oct  5 23:33:13 mythtv kernel: Hpsc: 0x00001, Hfsc: 0x00600
Oct  5 23:33:13 mythtv kernel: Vsrc: 576, Vscy: 0x004cc
Oct  5 23:33:16 mythtv kernel: NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-6111  Tue Jul 27 07:55:38 PDT 2004

and the syslog

Code:

Oct  5 23:30:01 mythtv /USR/SBIN/CRON[6433]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
Oct  5 23:33:13 mythtv kernel: saa7115[0]: decoder set picture bright=140 contrast=55 saturation=44 hue=-25
Oct  5 23:33:13 mythtv last message repeated 3 times
Oct  5 23:33:13 mythtv kernel: saa7115[0]: decoder set size
Oct  5 23:33:13 mythtv kernel: Hpsc: 0x00001, Hfsc: 0x00600
Oct  5 23:33:13 mythtv kernel: Vsrc: 576, Vscy: 0x004cc
Oct  5 23:33:13 mythtv kernel: saa7115[0]: decoder disable output
Oct  5 23:33:14 mythtv kernel: saa7115[0]: decoder enable output
Oct  5 23:33:16 mythtv kernel: NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-6111  Tue Jul 27 07:55:38 PDT 2004
Oct  5 23:33:16 mythtv insmod: Warning: loading /lib/modules/2.4.25-chw/kernel/drivers/video/nvidia.o will taint the kernel: non-GPL license - NVIDIA
Oct  5 23:33:16 mythtv insmod:   See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Oct  5 23:33:16 mythtv insmod: Module nvidia loaded, with warnings
Oct  5 23:35:01 mythtv /USR/SBIN/CRON[6452]: (root) CMD (nice -n 19 /usr/local/bin/mythlink.sh)
Oct  5 23:40:01 mythtv /USR/SBIN/CRON[6459]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
Oct  5 23:43:28 mythtv kernel: saa7115[0]: decoder set input (0)
Oct  5 23:43:28 mythtv kernel: saa7115[0]: now setting Composite input
Oct  5 23:43:28 mythtv kernel: saa7115[0]: decoder set norm PAL
Oct  5 23:43:28 mythtv kernel: saa7115[0] set audio: 0x02
Oct  5 23:43:28 mythtv kernel: saa7115[0]: decoder set input (4)
Oct  5 23:43:28 mythtv kernel: saa7115[0]: now setting Composite input
Oct  5 23:43:29 mythtv kernel: saa7115[0]: decoder set norm PAL
Oct  5 23:43:29 mythtv kernel: saa7115[0] set audio: 0x02
Oct  5 23:43:29 mythtv kernel: saa7115[0]: decoder set picture bright=140 contrast=55 saturation=44 hue=-25
Oct  5 23:43:29 mythtv last message repeated 3 times

Thank you again for the help.
Mark

_________________
M10000 and PVR 250

Top

Xsecrets

Post subject:

Posted: Tue Oct 05, 2004 5:09 pm

Joined: Mon Oct 06, 2003 10:38 am

Posts: 4978

Location: Nashville, TN

I still don't really see any problems could you try running the frontend from an xterm and then seeing what kind of errors show up there?

_________________
Have a question search the forum and have a look at the KnoppMythWiki.

Xsecrets

Top

turpie

Post subject:

Posted: Wed Oct 06, 2004 1:29 am

Joined: Wed Apr 28, 2004 10:42 pm

Posts: 405

Location: Bendigo, Victoria, Australia

I seem to be having the same problem as markm.

When I tried running the FE from an xterm I got the following:

Quote:

Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
2004-10-06 17:23:21 mythfrontend version: 0.16.20040906-1 www.mythtv.org
2004-10-06 17:23:21 Enabled verbose msgs : important general
2004-10-06 17:23:22 Registering Internal as a media playback plugin.
2004-10-06 17:23:22 Registering MythDVD DVD Media Handler as a media handler
2004-10-06 17:23:22 Registering MythDVD VCD Media Handler as a media handler
2004-10-06 17:23:22 Registering MythMusic Media Handler as a media handler
2004-10-06 17:23:30 All Programs
2004-10-06 17:23:31 Connecting to backend server: 172.16.1.240:6543 (try 1 of 5)
2004-10-06 17:23:31 Using protocol version 13
2004-10-06 17:23:31 Using protocol version 13
2004-10-06 17:23:38 Opening OSS audio device '/dev/dsp'.
2004-10-06 17:23:38 Audio fragment size: 4096
2004-10-06 17:23:38 Using XV port 53
2004-10-06 17:23:39 Changing from None to WatchingPreRecorded
pthread_setschedparam: Operation not permitted
2004-10-06 17:23:39 Running as SUID root would allow some threads to run with re
altime priority, improving video smoothness.
waiting for free video buffers timed out
waiting for free video buffers timed out
waiting for free video buffers timed out
...

Could it be something to do with the nvidia drivers that we are both using?

_________________
Paul Turpie
-------------
<--Is your location in your profile? Why not?

Top

Xsecrets

Post subject:

Posted: Wed Oct 06, 2004 6:39 am

Joined: Mon Oct 06, 2003 10:38 am

Posts: 4978

Location: Nashville, TN

well you are not the only ones using those nvidia drivers. Are either or both of you using xvmc, because that may be causing problems since mythtv was compiled with the library from the older nvidia drivers. Otherwise I'm just not seeing the error.

_________________
Have a question search the forum and have a look at the KnoppMythWiki.

Xsecrets

Top

markm

Post subject:

Posted: Wed Oct 06, 2004 3:11 pm

Joined: Fri Jun 11, 2004 3:33 pm

Posts: 9

I think my problem may be different. If I run killall mythfrontend from PuTTY the monitor does not revert back to the grey KnoppMyth background with an Xterm window. Instead it remains as a black screen.

At this point I ran top

Code:

  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  Command
  629 root      20 -10 70088  19m  12m R 99.9  9.1   5:50.47 XFree86
    1 root       8   0    76   76   48 S  0.0  0.0   0:04.75 init
    2 root       9   0     0    0    0 S  0.0  0.0   0:00.01 keventd
    3 root      19  19     0    0    0 S  0.0  0.0   0:00.01 ksoftirqd_CPU0
    4 root       9   0     0    0    0 S  0.0  0.0   0:00.00 kswapd
    5 root       9   0     0    0    0 S  0.0  0.0   0:00.00 bdflush
    6 root       9   0     0    0    0 S  0.0  0.0   0:00.01 kupdated
    8 root       9   0     0    0    0 S  0.0  0.0   0:00.13 kjournald
   86 root       9   0     0    0    0 S  0.0  0.0   0:00.00 khubd
  130 root       9   0     0    0    0 S  0.0  0.0   0:00.00 pagebufd
  131 root       9   0     0    0    0 S  0.0  0.0   0:00.00 xfslogd/0
  132 root       9   0     0    0    0 S  0.0  0.0   0:00.00 xfsdatad/0
  198 root       9   0     0    0    0 S  0.0  0.0   0:00.00 kjournald
  261 root       9   0   748  744  632 S  0.0  0.3   0:00.01 pump
  271 daemon     9   0   420  420  352 S  0.0  0.2   0:00.00 portmap
  374 root       9   0   612  612  516 S  0.0  0.3   0:00.01 syslogd
  383 root       9   0  1240 1240  476 S  0.0  0.6   0:00.05 klogd

Does this offer any clues?
regards and more thanks
Mark.

_________________
M10000 and PVR 250

Top

sootzoo

Post subject:

Posted: Wed Oct 06, 2004 3:29 pm

Joined: Tue Oct 05, 2004 6:59 pm

Posts: 15

Location: Philadelphia, PA

No, that's not particularly insightful, sorry. What we need to see, as mentioned before, is dmesg or syslog or /var/log/messages output when you start / kill the frontend / backend.

Top doesn't even give you a full process list, `ps ax` would be more helpful, but I'd rather see a timeline with the timestamped logfiles to go along with it. It'll take you some time and some editing to pull together, but there are too many variables here and nothing obvious that's jumping out at me. Sorry.

Top

markm

Post subject:

Posted: Wed Oct 06, 2004 4:14 pm

Joined: Fri Jun 11, 2004 3:33 pm

Posts: 9

OK, sorry if I missed the point.

Here's the log as I started mythfrontend

Code:

2004-10-06 22:44:22 mythfrontend version: 0.16.20040906-1 www.mythtv.org
2004-10-06 22:44:22 Enabled verbose msgs : important general
2004-10-06 22:44:23 Registering Internal as a media playback plugin.
2004-10-06 22:44:23 Registering MythDVD DVD Media Handler as a media handler
2004-10-06 22:44:23 Registering MythDVD VCD Media Handler as a media handler
2004-10-06 22:44:23 Registering MythMusic Media Handler as a media handler
2004-10-06 22:44:24 Mediamonitor: Adding /dev/cdrom
2004-10-06 22:44:24 Mediamonitor: Adding /dev/dvd
2004-10-06 22:44:24 Starting media monitor.

and here's the dmesg file

Code:

Linux version 2.4.25-chw (root@km_dev.mysettopbox.tv) (gcc version 3.3.2 20030812 (Debian prerelease)) #1 Sat Apr 10 15:46:31 PDT 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000dff0000 (usable)
 BIOS-e820: 000000000dff0000 - 000000000dff3000 (ACPI NVS)
 BIOS-e820: 000000000dff3000 - 000000000e000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
223MB LOWMEM available.
On node 0 totalpages: 57328
zone(0): 4096 pages.
zone(1): 53232 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=Linux ro root=301 hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi hdg=scsi hdh=scsi apm=power-off nomce
ide_setup: hda=scsi
ide_setup: hdb=scsi
ide_setup: hdc=scsi
ide_setup: hdd=scsi
ide_setup: hde=scsi
ide_setup: hdf=scsi
ide_setup: hdg=scsi
ide_setup: hdh=scsi
Initializing CPU#0
Detected 1830.036 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3643.80 BogoMIPS
Memory: 223820k/229312k available (1363k kernel code, 5104k reserved, 490k data, 116k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU:     After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU:             Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU: AMD Athlon(tm) XP 2500+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb760, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [10de/01e0] at 00:00.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
pty: 256 Unix98 ptys configured
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
AMD_IDE: Bios didn't set cable bits corectly. Enabling workaround.
AMD_IDE: nVidia Corporation nForce2 IDE (rev a2) UDMA100 controller on pci00:09.0
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST3160023A, ATA DISK drive
hdc: SONY DVD RW DRU-500A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 312581808 sectors (160042 MB) w/8192KiB Cache, CHS=19457/255/63
ide-cd: passing drive hdc to ide-scsi emulation.
hdc: attached ide-scsi driver.
Partition check:
 hda: hda1 hda2 hda3 hda4
ide: late registration of driver.
Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
Highpoint HPT370 Softwareraid driver for linux version 0.02
Guestimating sector 312560384 for superblock
driver for Silicon Image(tm) Medley(tm) hardware version 0.0.1: No raid array found
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: SONY      Model: DVD RW DRU-500A   Rev: 2.0f
  Type:   CD-ROM                             ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 31x/31x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 150k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 116k freed
Adding Swap: 835372k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Real Time Clock Driver v1.10f
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Setting latency timer of device 00:02.0 to 64
usb-ohci.c: USB OHCI at membase 0xce8ae000, IRQ 11
usb-ohci.c: usb-00:02.0, nVidia Corporation nForce2 USB Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Setting latency timer of device 00:02.1 to 64
usb-ohci.c: USB OHCI at membase 0xce8b0000, IRQ 3
usb-ohci.c: usb-00:02.1, nVidia Corporation nForce2 USB Controller (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.23.
PCI: Setting latency timer of device 00:04.0 to 64
eth0: forcedeth.c: subsystem: 01297:f541 bound to 00:04.0
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 176M
agpgart: Detected NVIDIA nForce2 chipset
agpgart: AGP aperture is 64M @ 0xd0000000
PCI: Setting latency timer of device 00:06.0 to 64
intel8x0: clocking to 47459
SGI XFS with realtime, no debug enabled
SGI XFS Quota Management subsystem
NTFS driver v1.1.22 [Flags: R/W MODULE]
EFS: 1.0a - http://aeschi.ch.eu.org/efs/
ttyS1: LSR safety check engaged!
ttyS1: LSR safety check engaged!
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,4), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
smbfs: mount_data version 1919251317 is not supported

here's the messages before it crashed

Code:

Oct  6 22:37:31 mythtv kernel: Kernel logging (proc) stopped.
Oct  6 22:37:31 mythtv kernel: Kernel log daemon terminating.
Oct  6 22:37:31 mythtv exiting on signal 15
Oct  6 22:39:03 mythtv syslogd 1.4.1#10: restart.
Oct  6 22:39:03 mythtv kernel: klogd 1.4.1#10, log source = /proc/kmsg started.
Oct  6 22:39:03 mythtv kernel: Inspecting /boot/System.map-2.4.25-chw
Oct  6 22:39:03 mythtv kernel: Loaded 18648 symbols from /boot/System.map-2.4.25-chw.
Oct  6 22:39:03 mythtv kernel: Symbols match kernel version 2.4.25.
Oct  6 22:39:03 mythtv kernel: Loaded 1357 symbols from 29 modules.
Oct  6 22:39:03 mythtv kernel: Linux version 2.4.25-chw (root@km_dev.mysettopbox.tv) (gcc version 3.3.2 20030812 (Debian prerelease)) #1 Sat Apr 10 15:46:31 PDT 2004
Oct  6 22:39:03 mythtv kernel: BIOS-provided physical RAM map:
Oct  6 22:39:03 mythtv kernel:  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Oct  6 22:39:03 mythtv kernel:  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Oct  6 22:39:03 mythtv kernel:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Oct  6 22:39:03 mythtv kernel:  BIOS-e820: 0000000000100000 - 000000000dff0000 (usable)
Oct  6 22:39:03 mythtv kernel:  BIOS-e820: 000000000dff0000 - 000000000dff3000 (ACPI NVS)
Oct  6 22:39:03 mythtv kernel:  BIOS-e820: 000000000dff3000 - 000000000e000000 (ACPI data)
Oct  6 22:39:03 mythtv kernel:  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Oct  6 22:39:03 mythtv kernel:  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Oct  6 22:39:03 mythtv kernel:  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Oct  6 22:39:03 mythtv kernel: 0MB HIGHMEM available.
Oct  6 22:39:03 mythtv kernel: 223MB LOWMEM available.
Oct  6 22:39:03 mythtv kernel: On node 0 totalpages: 57328
Oct  6 22:39:03 mythtv kernel: zone(0): 4096 pages.
Oct  6 22:39:03 mythtv kernel: zone(1): 53232 pages.
Oct  6 22:39:03 mythtv kernel: zone(2): 0 pages.
Oct  6 22:39:03 mythtv kernel: Kernel command line: auto BOOT_IMAGE=Linux ro root=301 hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi hdg=scsi hdh=scsi apm=power-off nomce
Oct  6 22:39:03 mythtv kernel: ide_setup: hda=scsi
Oct  6 22:39:03 mythtv kernel: ide_setup: hdb=scsi
Oct  6 22:39:03 mythtv kernel: ide_setup: hdc=scsi
Oct  6 22:39:03 mythtv kernel: ide_setup: hdd=scsi
Oct  6 22:39:03 mythtv kernel: ide_setup: hde=scsi
Oct  6 22:39:03 mythtv kernel: ide_setup: hdf=scsi
Oct  6 22:39:03 mythtv kernel: ide_setup: hdg=scsi
Oct  6 22:39:03 mythtv kernel: ide_setup: hdh=scsi
Oct  6 22:39:03 mythtv kernel: Initializing CPU#0
Oct  6 22:39:03 mythtv kernel: Detected 1830.036 MHz processor.
Oct  6 22:39:03 mythtv kernel: Console: colour VGA+ 80x25
Oct  6 22:39:03 mythtv kernel: Calibrating delay loop... 3643.80 BogoMIPS
Oct  6 22:39:03 mythtv kernel: Memory: 223820k/229312k available (1363k kernel code, 5104k reserved, 490k data, 116k init, 0k highmem)
Oct  6 22:39:03 mythtv kernel: Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Oct  6 22:39:03 mythtv kernel: Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Oct  6 22:39:03 mythtv kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Oct  6 22:39:03 mythtv kernel: Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Oct  6 22:39:03 mythtv kernel: Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
Oct  6 22:39:03 mythtv kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Oct  6 22:39:03 mythtv kernel: CPU: L2 Cache: 512K (64 bytes/line)
Oct  6 22:39:03 mythtv kernel: CPU: AMD Athlon(tm) XP 2500+ stepping 00
Oct  6 22:39:03 mythtv kernel: Enabling fast FPU save and restore... done.
Oct  6 22:39:03 mythtv kernel: Enabling unmasked SIMD FPU exception support... done.
Oct  6 22:39:03 mythtv kernel: Checking 'hlt' instruction... OK.
Oct  6 22:39:03 mythtv kernel: POSIX conformance testing by UNIFIX
Oct  6 22:39:03 mythtv kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Oct  6 22:39:03 mythtv kernel: mtrr: detected mtrr type: Intel
Oct  6 22:39:03 mythtv kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb760, last bus=2
Oct  6 22:39:03 mythtv kernel: PCI: Using configuration type 1
Oct  6 22:39:03 mythtv kernel: PCI: Probing PCI hardware
Oct  6 22:39:03 mythtv kernel: PCI: Probing PCI hardware (bus 00)
Oct  6 22:39:03 mythtv kernel: PCI: Using IRQ router default [10de/01e0] at 00:00.0
Oct  6 22:39:03 mythtv kernel: isapnp: Scanning for PnP cards...
Oct  6 22:39:03 mythtv kernel: isapnp: No Plug & Play device found
Oct  6 22:39:03 mythtv kernel: Linux NET4.0 for Linux 2.4
Oct  6 22:39:03 mythtv kernel: Based upon Swansea University Computer Society NET3.039
Oct  6 22:39:03 mythtv kernel: Initializing RT netlink socket
Oct  6 22:39:03 mythtv kernel: Starting kswapd
Oct  6 22:39:03 mythtv kernel: VFS: Disk quotas vdquot_6.5.1
Oct  6 22:39:03 mythtv kernel: pty: 256 Unix98 ptys configured
Oct  6 22:39:03 mythtv kernel: FDC 0 is a post-1991 82077
Oct  6 22:39:03 mythtv kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Oct  6 22:39:03 mythtv kernel: loop: loaded (max 8 devices)
Oct  6 22:39:03 mythtv kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Oct  6 22:39:03 mythtv kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Oct  6 22:39:03 mythtv kernel: NFORCE2: IDE controller at PCI slot 00:09.0
Oct  6 22:39:03 mythtv kernel: NFORCE2: chipset revision 162
Oct  6 22:39:03 mythtv kernel: NFORCE2: not 100%% native mode: will probe irqs later
Oct  6 22:39:03 mythtv kernel: AMD_IDE: Bios didn't set cable bits corectly. Enabling workaround.
Oct  6 22:39:03 mythtv kernel: AMD_IDE: nVidia Corporation nForce2 IDE (rev a2) UDMA100 controller on pci00:09.0
Oct  6 22:39:03 mythtv kernel:     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
Oct  6 22:39:03 mythtv kernel:     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Oct  6 22:39:03 mythtv kernel: hda: ST3160023A, ATA DISK drive
Oct  6 22:39:03 mythtv kernel: hdc: SONY DVD RW DRU-500A, ATAPI CD/DVD-ROM drive
Oct  6 22:39:03 mythtv kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct  6 22:39:03 mythtv kernel: ide1 at 0x170-0x177,0x376 on irq 15
Oct  6 22:39:03 mythtv kernel: hda: attached ide-disk driver.
Oct  6 22:39:03 mythtv kernel: hda: host protected area => 1
Oct  6 22:39:03 mythtv kernel: hda: 312581808 sectors (160042 MB) w/8192KiB Cache, CHS=19457/255/63
Oct  6 22:39:03 mythtv kernel: ide-cd: passing drive hdc to ide-scsi emulation.
Oct  6 22:39:03 mythtv kernel: hdc: attached ide-scsi driver.
Oct  6 22:39:03 mythtv kernel: Partition check:
Oct  6 22:39:03 mythtv kernel:  hda: hda1 hda2 hda3 hda4
Oct  6 22:39:03 mythtv kernel: Highpoint HPT370 Softwareraid driver for linux version 0.02
Oct  6 22:39:03 mythtv kernel: Guestimating sector 312560384 for superblock
Oct  6 22:39:03 mythtv kernel: SCSI subsystem driver Revision: 1.00
Oct  6 22:39:03 mythtv kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Oct  6 22:39:03 mythtv kernel:   Vendor: SONY      Model: DVD RW DRU-500A   Rev: 2.0f
Oct  6 22:39:03 mythtv kernel:   Type:   CD-ROM                             ANSI SCSI revision: 02
Oct  6 22:39:03 mythtv kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Oct  6 22:39:03 mythtv kernel: sr0: scsi3-mmc drive: 31x/31x writer cd/rw xa/form2 cdda tray
Oct  6 22:39:03 mythtv kernel: Uniform CD-ROM driver Revision: 3.12
Oct  6 22:39:03 mythtv kernel: Initializing Cryptographic API
Oct  6 22:39:03 mythtv kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Oct  6 22:39:03 mythtv kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Oct  6 22:39:03 mythtv kernel: IP: routing cache hash table of 2048 buckets, 16Kbytes
Oct  6 22:39:03 mythtv kernel: TCP: Hash tables configured (established 16384 bind 32768)
Oct  6 22:39:03 mythtv kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Oct  6 22:39:03 mythtv kernel: RAMDISK: Compressed image found at block 0
Oct  6 22:39:03 mythtv kernel: Freeing initrd memory: 150k freed
Oct  6 22:39:03 mythtv kernel: VFS: Mounted root (ext2 filesystem).
Oct  6 22:39:03 mythtv kernel: Journalled Block Device driver loaded
Oct  6 22:39:03 mythtv kernel: kjournald starting.  Commit interval 5 seconds
Oct  6 22:39:03 mythtv kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Oct  6 22:39:03 mythtv kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct  6 22:39:03 mythtv kernel: Freeing unused kernel memory: 116k freed
Oct  6 22:39:03 mythtv kernel: Adding Swap: 835372k swap-space (priority -1)
Oct  6 22:39:03 mythtv kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Oct  6 22:39:03 mythtv kernel: Real Time Clock Driver v1.10f
Oct  6 22:39:03 mythtv kernel: usb.c: registered new driver usbdevfs
Oct  6 22:39:03 mythtv kernel: usb.c: registered new driver hub
Oct  6 22:39:03 mythtv kernel: usb-ohci.c: USB OHCI at membase 0xce8ae000, IRQ 11
Oct  6 22:39:03 mythtv kernel: usb-ohci.c: usb-00:02.0, nVidia Corporation nForce2 USB Controller
Oct  6 22:39:03 mythtv kernel: usb.c: new USB bus registered, assigned bus number 1
Oct  6 22:39:03 mythtv kernel: hub.c: USB hub found
Oct  6 22:39:03 mythtv kernel: hub.c: 3 ports detected
Oct  6 22:39:03 mythtv kernel: usb-ohci.c: USB OHCI at membase 0xce8b0000, IRQ 3
Oct  6 22:39:03 mythtv kernel: usb-ohci.c: usb-00:02.1, nVidia Corporation nForce2 USB Controller (#2)
Oct  6 22:39:03 mythtv kernel: usb.c: new USB bus registered, assigned bus number 2
Oct  6 22:39:03 mythtv kernel: hub.c: USB hub found
Oct  6 22:39:03 mythtv kernel: hub.c: 3 ports detected
Oct  6 22:39:03 mythtv kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
Oct  6 22:39:03 mythtv kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Oct  6 22:39:03 mythtv kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.23.
Oct  6 22:39:03 mythtv kernel: eth0: forcedeth.c: subsystem: 01297:f541 bound to 00:04.0
Oct  6 22:39:03 mythtv kernel: Linux agpgart interface v0.99 (c) Jeff Hartmann
Oct  6 22:39:03 mythtv kernel: agpgart: Maximum main memory to use for agp memory: 176M
Oct  6 22:39:03 mythtv kernel: agpgart: Detected NVIDIA nForce2 chipset
Oct  6 22:39:03 mythtv kernel: agpgart: AGP aperture is 64M @ 0xd0000000
Oct  6 22:39:03 mythtv kernel: intel8x0: clocking to 47459
Oct  6 22:39:03 mythtv kernel: SGI XFS with realtime, no debug enabled
Oct  6 22:39:03 mythtv kernel: SGI XFS Quota Management subsystem
Oct  6 22:39:03 mythtv kernel: NTFS driver v1.1.22 [Flags: R/W MODULE]
Oct  6 22:39:03 mythtv kernel: EFS: 1.0a - http://aeschi.ch.eu.org/efs/
Oct  6 22:39:03 mythtv kernel: ttyS1: LSR safety check engaged!
Oct  6 22:39:03 mythtv kernel: ttyS1: LSR safety check engaged!
Oct  6 22:39:03 mythtv kernel: kjournald starting.  Commit interval 5 seconds
Oct  6 22:39:03 mythtv kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,4), internal journal
Oct  6 22:39:03 mythtv kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct  6 22:39:03 mythtv kernel: blk: queue c0316080, I/O limit 4095Mb (mask 0xffffffff)
Oct  6 22:39:06 mythtv kernel: Linux video capture interface: v1.00
Oct  6 22:39:06 mythtv kernel: i2c-core.o: i2c core module version 2.6.1 (20010830)
Oct  6 22:39:06 mythtv kernel: i2c-algo-bit.o: i2c bit algorithm module
Oct  6 22:39:06 mythtv kernel: ivtv: version 0.1.9 (0.1.10pre1) loading
Oct  6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #0
Oct  6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #1
Oct  6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #2
Oct  6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #3
Oct  6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #4
Oct  6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #5
Oct  6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #6
Oct  6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #7
Oct  6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #8
Oct  6 22:39:06 mythtv kernel: ivtv: SGarray_size = 420, DSGarray_size = 16
Oct  6 22:39:06 mythtv kernel: ivtv: Found an iTVC16 based chip
Oct  6 22:39:06 mythtv kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
Oct  6 22:39:06 mythtv kernel: saa7114.c: starting probe for adapter ivtv i2c driver #0 (0x10005)
Oct  6 22:39:06 mythtv kernel: saa7114.c: detecting saa7114 client on address 0x42
Oct  6 22:39:06 mythtv kernel: saa7115.c: writing init values
Oct  6 22:39:08 mythtv kernel: status: (1E) 0x08, (1F) 0xc0
Oct  6 22:39:08 mythtv kernel: msp34xx: init: chip=MSP3415G-B8, has NICAM support
Oct  6 22:39:08 mythtv kernel: msp3410: daemon started
Oct  6 22:39:11 mythtv kernel: ivtv: Encoder revision: 0x02040011
Oct  6 22:39:11 mythtv kernel: tuner: type set to 18 (Temic PAL_I (4066 FY5)) by ivtv i2c driver #0
Oct  6 22:39:11 mythtv kernel: ivtv: Registered v4l2 device, minor 0
Oct  6 22:39:11 mythtv kernel: ivtv: Registered v4l2 device, minor 32
Oct  6 22:39:11 mythtv kernel: ivtv: Registered v4l2 device, minor 224
Oct  6 22:39:11 mythtv kernel: ivtv: Registered v4l2 device, minor 24
Oct  6 22:39:11 mythtv kernel: ivtv: loaded
Oct  6 22:39:11 mythtv kernel: lirc_dev: IR Remote Control driver registered, at major 61 
Oct  6 22:39:11 mythtv kernel: bttv: driver version 0.9.15 loaded
Oct  6 22:39:11 mythtv kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture
Oct  6 22:39:11 mythtv kernel: lirc_i2c: chip found @ 0x18 (Hauppauge IR)
Oct  6 22:39:11 mythtv kernel: lirc_dev: lirc_register_plugin:sample_rate: 10
Oct  6 22:39:11 mythtv kernel: saa7115[0]: decoder set size
Oct  6 22:39:11 mythtv kernel: Setting full PAL width
Oct  6 22:39:11 mythtv kernel: Vsrc: 576, Vscy: 0x004cc
Oct  6 22:39:16 mythtv kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)

with the addition of this after crashing

Code:

Oct  6 22:39:16 mythtv kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Oct  6 22:52:41 mythtv kernel: saa7115[0]: decoder set size
Oct  6 22:52:41 mythtv kernel: Hpsc: 0x00001, Hfsc: 0x00600
Oct  6 22:52:41 mythtv kernel: Vsrc: 576, Vscy: 0x004cc
Oct  6 22:52:43 mythtv kernel: NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-6111  Tue Jul 27 07:55:38 PDT 2004

similarly with syslog. Before

Code:

Oct  6 22:30:02 mythtv /USR/SBIN/CRON[940]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
Oct  6 22:35:01 mythtv /USR/SBIN/CRON[948]: (root) CMD (nice -n 19 /usr/local/bin/mythlink.sh)
Oct  6 22:37:25 mythtv init: Switching to runlevel: 6
Oct  6 22:37:31 mythtv kernel: Kernel logging (proc) stopped.
Oct  6 22:37:31 mythtv kernel: Kernel log daemon terminating.
Oct  6 22:37:31 mythtv exiting on signal 15
Oct  6 22:39:03 mythtv syslogd 1.4.1#10: restart.
Oct  6 22:39:03 mythtv kernel: klogd 1.4.1#10, log source = /proc/kmsg started.
Oct  6 22:39:03 mythtv kernel: Inspecting /boot/System.map-2.4.25-chw
Oct  6 22:39:03 mythtv kernel: Loaded 18648 symbols from /boot/System.map-2.4.25-chw.
Oct  6 22:39:03 mythtv kernel: Symbols match kernel version 2.4.25.
Oct  6 22:39:03 mythtv kernel: Loaded 1357 symbols from 29 modules.
Oct  6 22:39:03 mythtv kernel: Linux version 2.4.25-chw (root@km_dev.mysettopbox.tv) (gcc version 3.3.2 20030812 (Debian prerelease)) #1 Sat Apr 10 15:46:31 PDT 2004
Oct  6 22:39:03 mythtv kernel: BIOS-provided physical RAM map:
Oct  6 22:39:03 mythtv kernel:  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Oct  6 22:39:03 mythtv kernel:  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Oct  6 22:39:03 mythtv kernel:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Oct  6 22:39:03 mythtv kernel:  BIOS-e820: 0000000000100000 - 000000000dff0000 (usable)
Oct  6 22:39:03 mythtv kernel:  BIOS-e820: 000000000dff0000 - 000000000dff3000 (ACPI NVS)
Oct  6 22:39:03 mythtv kernel:  BIOS-e820: 000000000dff3000 - 000000000e000000 (ACPI data)
Oct  6 22:39:03 mythtv kernel:  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Oct  6 22:39:03 mythtv kernel:  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Oct  6 22:39:03 mythtv kernel:  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Oct  6 22:39:03 mythtv kernel: 0MB HIGHMEM available.
Oct  6 22:39:03 mythtv kernel: 223MB LOWMEM available.
Oct  6 22:39:03 mythtv kernel: On node 0 totalpages: 57328
Oct  6 22:39:03 mythtv kernel: zone(0): 4096 pages.
Oct  6 22:39:03 mythtv kernel: zone(1): 53232 pages.
Oct  6 22:39:03 mythtv kernel: zone(2): 0 pages.
Oct  6 22:39:03 mythtv kernel: Kernel command line: auto BOOT_IMAGE=Linux ro root=301 hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi hdg=scsi hdh=scsi apm=power-off nomce
Oct  6 22:39:03 mythtv kernel: ide_setup: hda=scsi
Oct  6 22:39:03 mythtv kernel: ide_setup: hdb=scsi
Oct  6 22:39:03 mythtv kernel: ide_setup: hdc=scsi
Oct  6 22:39:03 mythtv kernel: ide_setup: hdd=scsi
Oct  6 22:39:03 mythtv kernel: ide_setup: hde=scsi
Oct  6 22:39:03 mythtv kernel: ide_setup: hdf=scsi
Oct  6 22:39:03 mythtv kernel: ide_setup: hdg=scsi
Oct  6 22:39:03 mythtv kernel: ide_setup: hdh=scsi
Oct  6 22:39:03 mythtv kernel: Initializing CPU#0
Oct  6 22:39:03 mythtv kernel: Detected 1830.036 MHz processor.
Oct  6 22:39:03 mythtv kernel: Console: colour VGA+ 80x25
Oct  6 22:39:03 mythtv kernel: Calibrating delay loop... 3643.80 BogoMIPS
Oct  6 22:39:03 mythtv kernel: Memory: 223820k/229312k available (1363k kernel code, 5104k reserved, 490k data, 116k init, 0k highmem)
Oct  6 22:39:03 mythtv kernel: Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Oct  6 22:39:03 mythtv kernel: Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Oct  6 22:39:03 mythtv kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Oct  6 22:39:03 mythtv kernel: Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Oct  6 22:39:03 mythtv kernel: Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
Oct  6 22:39:03 mythtv kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Oct  6 22:39:03 mythtv kernel: CPU: L2 Cache: 512K (64 bytes/line)
Oct  6 22:39:03 mythtv kernel: CPU:     After generic, caps: 0383fbff c1c3fbff 00000000 00000000
Oct  6 22:39:03 mythtv kernel: CPU:             Common caps: 0383fbff c1c3fbff 00000000 00000000
Oct  6 22:39:03 mythtv kernel: CPU: AMD Athlon(tm) XP 2500+ stepping 00
Oct  6 22:39:03 mythtv kernel: Enabling fast FPU save and restore... done.
Oct  6 22:39:03 mythtv kernel: Enabling unmasked SIMD FPU exception support... done.
Oct  6 22:39:03 mythtv kernel: Checking 'hlt' instruction... OK.
Oct  6 22:39:03 mythtv kernel: POSIX conformance testing by UNIFIX
Oct  6 22:39:03 mythtv kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Oct  6 22:39:03 mythtv kernel: mtrr: detected mtrr type: Intel
Oct  6 22:39:03 mythtv kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb760, last bus=2
Oct  6 22:39:03 mythtv kernel: PCI: Using configuration type 1
Oct  6 22:39:03 mythtv kernel: PCI: Probing PCI hardware
Oct  6 22:39:03 mythtv kernel: PCI: Probing PCI hardware (bus 00)
Oct  6 22:39:03 mythtv kernel: PCI: Using IRQ router default [10de/01e0] at 00:00.0
Oct  6 22:39:03 mythtv kernel: isapnp: Scanning for PnP cards...
Oct  6 22:39:03 mythtv kernel: isapnp: No Plug & Play device found
Oct  6 22:39:03 mythtv kernel: Linux NET4.0 for Linux 2.4
Oct  6 22:39:03 mythtv kernel: Based upon Swansea University Computer Society NET3.039
Oct  6 22:39:03 mythtv kernel: Initializing RT netlink socket
Oct  6 22:39:03 mythtv kernel: Starting kswapd
Oct  6 22:39:03 mythtv kernel: VFS: Disk quotas vdquot_6.5.1
Oct  6 22:39:03 mythtv kernel: pty: 256 Unix98 ptys configured
Oct  6 22:39:03 mythtv kernel: FDC 0 is a post-1991 82077
Oct  6 22:39:03 mythtv kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Oct  6 22:39:03 mythtv kernel: loop: loaded (max 8 devices)
Oct  6 22:39:03 mythtv kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Oct  6 22:39:03 mythtv kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Oct  6 22:39:03 mythtv kernel: NFORCE2: IDE controller at PCI slot 00:09.0
Oct  6 22:39:03 mythtv kernel: NFORCE2: chipset revision 162
Oct  6 22:39:03 mythtv kernel: NFORCE2: not 100%% native mode: will probe irqs later
Oct  6 22:39:03 mythtv kernel: AMD_IDE: Bios didn't set cable bits corectly. Enabling workaround.
Oct  6 22:39:03 mythtv kernel: AMD_IDE: nVidia Corporation nForce2 IDE (rev a2) UDMA100 controller on pci00:09.0
Oct  6 22:39:03 mythtv kernel:     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
Oct  6 22:39:03 mythtv kernel:     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Oct  6 22:39:03 mythtv kernel: hda: ST3160023A, ATA DISK drive
Oct  6 22:39:03 mythtv kernel: hdc: SONY DVD RW DRU-500A, ATAPI CD/DVD-ROM drive
Oct  6 22:39:03 mythtv kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct  6 22:39:03 mythtv kernel: ide1 at 0x170-0x177,0x376 on irq 15
Oct  6 22:39:03 mythtv kernel: hda: attached ide-disk driver.
Oct  6 22:39:03 mythtv kernel: hda: host protected area => 1
Oct  6 22:39:03 mythtv kernel: hda: 312581808 sectors (160042 MB) w/8192KiB Cache, CHS=19457/255/63
Oct  6 22:39:03 mythtv kernel: ide-cd: passing drive hdc to ide-scsi emulation.
Oct  6 22:39:03 mythtv kernel: hdc: attached ide-scsi driver.
Oct  6 22:39:03 mythtv kernel: Partition check:
Oct  6 22:39:03 mythtv kernel:  hda: hda1 hda2 hda3 hda4
Oct  6 22:39:03 mythtv kernel: ide: late registration of driver.
Oct  6 22:39:03 mythtv kernel: Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
Oct  6 22:39:03 mythtv kernel: Highpoint HPT370 Softwareraid driver for linux version 0.02
Oct  6 22:39:03 mythtv kernel: Guestimating sector 312560384 for superblock
Oct  6 22:39:03 mythtv kernel: driver for Silicon Image(tm) Medley(tm) hardware version 0.0.1: No raid array found
Oct  6 22:39:03 mythtv kernel: SCSI subsystem driver Revision: 1.00
Oct  6 22:39:03 mythtv kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Oct  6 22:39:03 mythtv kernel:   Vendor: SONY      Model: DVD RW DRU-500A   Rev: 2.0f
Oct  6 22:39:03 mythtv kernel:   Type:   CD-ROM                             ANSI SCSI revision: 02
Oct  6 22:39:03 mythtv kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Oct  6 22:39:03 mythtv kernel: sr0: scsi3-mmc drive: 31x/31x writer cd/rw xa/form2 cdda tray
Oct  6 22:39:03 mythtv kernel: Uniform CD-ROM driver Revision: 3.12
Oct  6 22:39:03 mythtv kernel: Initializing Cryptographic API
Oct  6 22:39:03 mythtv kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Oct  6 22:39:03 mythtv kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Oct  6 22:39:03 mythtv kernel: IP: routing cache hash table of 2048 buckets, 16Kbytes
Oct  6 22:39:03 mythtv kernel: TCP: Hash tables configured (established 16384 bind 32768)
Oct  6 22:39:03 mythtv kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Oct  6 22:39:03 mythtv kernel: RAMDISK: Compressed image found at block 0
Oct  6 22:39:03 mythtv kernel: Freeing initrd memory: 150k freed
Oct  6 22:39:03 mythtv kernel: VFS: Mounted root (ext2 filesystem).
Oct  6 22:39:03 mythtv kernel: Journalled Block Device driver loaded
Oct  6 22:39:03 mythtv kernel: kjournald starting.  Commit interval 5 seconds
Oct  6 22:39:03 mythtv kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Oct  6 22:39:03 mythtv kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct  6 22:39:03 mythtv kernel: Freeing unused kernel memory: 116k freed
Oct  6 22:39:03 mythtv kernel: Adding Swap: 835372k swap-space (priority -1)
Oct  6 22:39:03 mythtv kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Oct  6 22:39:03 mythtv kernel: Real Time Clock Driver v1.10f
Oct  6 22:39:03 mythtv kernel: usb.c: registered new driver usbdevfs
Oct  6 22:39:03 mythtv kernel: usb.c: registered new driver hub
Oct  6 22:39:03 mythtv kernel: PCI: Setting latency timer of device 00:02.0 to 64
Oct  6 22:39:03 mythtv kernel: usb-ohci.c: USB OHCI at membase 0xce8ae000, IRQ 11
Oct  6 22:39:03 mythtv kernel: usb-ohci.c: usb-00:02.0, nVidia Corporation nForce2 USB Controller
Oct  6 22:39:03 mythtv kernel: usb.c: new USB bus registered, assigned bus number 1
Oct  6 22:39:03 mythtv kernel: hub.c: USB hub found
Oct  6 22:39:03 mythtv kernel: hub.c: 3 ports detected
Oct  6 22:39:03 mythtv kernel: PCI: Setting latency timer of device 00:02.1 to 64
Oct  6 22:39:03 mythtv kernel: usb-ohci.c: USB OHCI at membase 0xce8b0000, IRQ 3
Oct  6 22:39:03 mythtv kernel: usb-ohci.c: usb-00:02.1, nVidia Corporation nForce2 USB Controller (#2)
Oct  6 22:39:03 mythtv kernel: usb.c: new USB bus registered, assigned bus number 2
Oct  6 22:39:03 mythtv kernel: hub.c: USB hub found
Oct  6 22:39:03 mythtv kernel: hub.c: 3 ports detected
Oct  6 22:39:03 mythtv kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
Oct  6 22:39:03 mythtv kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Oct  6 22:39:03 mythtv kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.23.
Oct  6 22:39:03 mythtv kernel: PCI: Setting latency timer of device 00:04.0 to 64
Oct  6 22:39:03 mythtv kernel: eth0: forcedeth.c: subsystem: 01297:f541 bound to 00:04.0
Oct  6 22:39:03 mythtv kernel: Linux agpgart interface v0.99 (c) Jeff Hartmann
Oct  6 22:39:03 mythtv kernel: agpgart: Maximum main memory to use for agp memory: 176M
Oct  6 22:39:03 mythtv kernel: agpgart: Detected NVIDIA nForce2 chipset
Oct  6 22:39:03 mythtv kernel: agpgart: AGP aperture is 64M @ 0xd0000000
Oct  6 22:39:03 mythtv kernel: PCI: Setting latency timer of device 00:06.0 to 64
Oct  6 22:39:03 mythtv kernel: intel8x0: clocking to 47459
Oct  6 22:39:03 mythtv kernel: SGI XFS with realtime, no debug enabled
Oct  6 22:39:03 mythtv kernel: SGI XFS Quota Management subsystem
Oct  6 22:39:03 mythtv kernel: NTFS driver v1.1.22 [Flags: R/W MODULE]
Oct  6 22:39:03 mythtv kernel: EFS: 1.0a - http://aeschi.ch.eu.org/efs/
Oct  6 22:39:03 mythtv kernel: ttyS1: LSR safety check engaged!
Oct  6 22:39:03 mythtv kernel: ttyS1: LSR safety check engaged!
Oct  6 22:39:03 mythtv kernel: kjournald starting.  Commit interval 5 seconds
Oct  6 22:39:03 mythtv kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,4), internal journal
Oct  6 22:39:03 mythtv kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct  6 22:39:03 mythtv kernel: smbfs: mount_data version 1919251317 is not supported
Oct  6 22:39:03 mythtv kernel: blk: queue c0316080, I/O limit 4095Mb (mask 0xffffffff)
Oct  6 22:39:06 mythtv kernel: Linux video capture interface: v1.00
Oct  6 22:39:06 mythtv kernel: i2c-core.o: i2c core module version 2.6.1 (20010830)
Oct  6 22:39:06 mythtv kernel: i2c-algo-bit.o: i2c bit algorithm module
Oct  6 22:39:06 mythtv kernel: i2c-core.o: driver i2c TV tuner driver registered.
Oct  6 22:39:06 mythtv kernel: i2c-core.o: driver saa7115 registered.
Oct  6 22:39:06 mythtv kernel: i2c-core.o: driver i2c msp3400 driver registered.
Oct  6 22:39:06 mythtv kernel: ivtv: version 0.1.9 (0.1.10pre1) loading
Oct  6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #0
Oct  6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #1
Oct  6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #2
Oct  6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #3
Oct  6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #4
Oct  6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #5
Oct  6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #6
Oct  6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #7
Oct  6 22:39:06 mythtv kernel: ivtv: Autodetecting cardtype for card #8
Oct  6 22:39:06 mythtv kernel: ivtv: SGarray_size = 420, DSGarray_size = 16
Oct  6 22:39:06 mythtv kernel: ivtv: Found an iTVC16 based chip
Oct  6 22:39:06 mythtv kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
Oct  6 22:39:06 mythtv kernel: i2c-core.o: client [(tuner unset)] registered to adapter [ivtv i2c driver #0](pos. 0).
Oct  6 22:39:06 mythtv kernel: saa7114.c: starting probe for adapter ivtv i2c driver #0 (0x10005)
Oct  6 22:39:06 mythtv kernel: saa7114.c: detecting saa7114 client on address 0x42
Oct  6 22:39:06 mythtv kernel: saa7115.c: writing init values
Oct  6 22:39:08 mythtv kernel: status: (1E) 0x08, (1F) 0xc0
Oct  6 22:39:08 mythtv kernel: i2c-core.o: client [saa7115[0]] registered to adapter [ivtv i2c driver #0](pos. 1).
Oct  6 22:39:08 mythtv kernel: msp34xx: init: chip=MSP3415G-B8, has NICAM support
Oct  6 22:39:08 mythtv kernel: msp3410: daemon started
Oct  6 22:39:08 mythtv kernel: i2c-core.o: client [MSP3415G-B8] registered to adapter [ivtv i2c driver #0](pos. 2).
Oct  6 22:39:08 mythtv kernel: i2c-core.o: adapter ivtv i2c driver #0 registered as adapter 0.
Oct  6 22:39:11 mythtv kernel: ivtv: Encoder revision: 0x02040011
Oct  6 22:39:11 mythtv kernel: tuner: type set to 18 (Temic PAL_I (4066 FY5)) by ivtv i2c driver #0
Oct  6 22:39:11 mythtv kernel: ivtv: Registered v4l2 device, minor 0
Oct  6 22:39:11 mythtv kernel: ivtv: Registered v4l2 device, minor 32
Oct  6 22:39:11 mythtv kernel: ivtv: Registered v4l2 device, minor 224
Oct  6 22:39:11 mythtv kernel: ivtv: Registered v4l2 device, minor 24
Oct  6 22:39:11 mythtv kernel: ivtv: loaded
Oct  6 22:39:11 mythtv kernel: lirc_dev: IR Remote Control driver registered, at major 61 
Oct  6 22:39:11 mythtv kernel: bttv: driver version 0.9.15 loaded
Oct  6 22:39:11 mythtv kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture
Oct  6 22:39:11 mythtv insmod: /lib/modules/2.4.25-chw/kernel/drivers/media/video/bttv.o: init_module: No such device
Oct  6 22:39:11 mythtv insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.       You may find more information in syslog or the output from dmesg
Oct  6 22:39:11 mythtv insmod: /lib/modules/2.4.25-chw/kernel/drivers/media/video/bttv.o: insmod bttv failed
Oct  6 22:39:11 mythtv modprobe: modprobe: Can't locate module rivatv
Oct  6 22:39:11 mythtv kernel: i2c-core.o: driver i2c ir driver registered.
Oct  6 22:39:11 mythtv kernel: lirc_i2c: chip found @ 0x18 (Hauppauge IR)
Oct  6 22:39:11 mythtv kernel: i2c-core.o: client [Hauppauge IR] registered to adapter [ivtv i2c driver #0](pos. 3).
Oct  6 22:39:11 mythtv kernel: lirc_dev: lirc_register_plugin:sample_rate: 10
Oct  6 22:39:11 mythtv kernel: saa7115[0]: decoder set norm PAL
Oct  6 22:39:11 mythtv kernel: saa7115[0] set audio: 0x02
Oct  6 22:39:11 mythtv kernel: saa7115[0]: decoder set input (0)
Oct  6 22:39:11 mythtv kernel: saa7115[0]: now setting Composite input
Oct  6 22:39:11 mythtv kernel: saa7115[0]: decoder set size
Oct  6 22:39:11 mythtv kernel: Setting full PAL width
Oct  6 22:39:11 mythtv kernel: Vsrc: 576, Vscy: 0x004cc
Oct  6 22:39:14 mythtv /usr/sbin/cron[591]: (CRON) INFO (pidfile fd = 3)
Oct  6 22:39:14 mythtv /usr/sbin/cron[592]: (CRON) STARTUP (fork ok)
Oct  6 22:39:14 mythtv /usr/sbin/cron[592]: (CRON) INFO (Running @reboot jobs)
Oct  6 22:39:14 mythtv kernel: saa7115[0]: decoder set norm PAL
Oct  6 22:39:15 mythtv kernel: saa7115[0] set audio: 0x02
Oct  6 22:39:15 mythtv kernel: saa7115[0]: decoder set input (4)
Oct  6 22:39:15 mythtv kernel: saa7115[0]: now setting Composite input
Oct  6 22:39:15 mythtv kernel: saa7115[0]: decoder set norm PAL
Oct  6 22:39:15 mythtv kernel: saa7115[0] set audio: 0x02
Oct  6 22:39:15 mythtv kernel: saa7115[0]: decoder set picture bright=128 contrast=55 saturation=64 hue=0
Oct  6 22:39:15 mythtv kernel: saa7115[0]: decoder set picture bright=128 contrast=55 saturation=44 hue=0
Oct  6 22:39:15 mythtv kernel: saa7115[0]: decoder set picture bright=140 contrast=55 saturation=44 hue=0
Oct  6 22:39:15 mythtv kernel: saa7115[0]: decoder set picture bright=140 contrast=55 saturation=44 hue=-25
Oct  6 22:39:16 mythtv kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Oct  6 22:39:22 mythtv modprobe: modprobe: Can't locate module char-major-81-2
Oct  6 22:40:01 mythtv /USR/SBIN/CRON[678]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)

and this was added after

Code:

Oct  6 22:39:22 mythtv modprobe: modprobe: Can't locate module char-major-81-2
Oct  6 22:40:01 mythtv /USR/SBIN/CRON[678]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
Oct  6 22:50:01 mythtv /USR/SBIN/CRON[700]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
Oct  6 22:52:41 mythtv kernel: saa7115[0]: decoder set picture bright=140 contrast=55 saturation=44 hue=-25
Oct  6 22:52:41 mythtv last message repeated 3 times
Oct  6 22:52:41 mythtv kernel: saa7115[0]: decoder set size
Oct  6 22:52:41 mythtv kernel: Hpsc: 0x00001, Hfsc: 0x00600
Oct  6 22:52:41 mythtv kernel: Vsrc: 576, Vscy: 0x004cc
Oct  6 22:52:41 mythtv kernel: saa7115[0]: decoder disable output
Oct  6 22:52:41 mythtv kernel: saa7115[0]: decoder enable output
Oct  6 22:52:43 mythtv kernel: NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-6111  Tue Jul 27 07:55:38 PDT 2004
Oct  6 22:52:43 mythtv insmod: Warning: loading /lib/modules/2.4.25-chw/kernel/drivers/video/nvidia.o will taint the kernel: non-GPL license - NVIDIA
Oct  6 22:52:43 mythtv insmod:   See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Oct  6 22:52:43 mythtv insmod: Module nvidia loaded, with warnings

After running killall mythfrontend there was nothing new added.

A huge post I know and I hope I haven't broken any etiquette rules in doing so.
thanks
Mark

_________________
M10000 and PVR 250

Top

turpie

Post subject:

Posted: Wed Oct 06, 2004 5:44 pm

Joined: Wed Apr 28, 2004 10:42 pm

Posts: 405

Location: Bendigo, Victoria, Australia

How do I tell if I'm using xvmc?

If I run "apt-show-versions | grep myth"
The mythtv package installed is mythtv-i686-lirc 0.16-1.

I also tried changing my XF86Config-4 file back to the original one which used the "nv" driver instead of the "nvidia" driver and the problem still occurs.

Mark,
In what way do you think our problems are different?
When I try to watch a recording, the screen blanks and I can't use ESC to get back to a menu, or even ALT-F1 to get to the console.
If I kill the frontend via a Putty session the XFree86 process consumes 99% of the processor.
The only way to free it up is to reboot.

Could you try quitting the frontend, open an xterm, and run this command "mythfrontend > errors.log 2>&1". This will log any errors the frontend process generates. Then post the resulting errors.log

_________________
Paul Turpie
-------------
<--Is your location in your profile? Why not?

Last edited by turpie on Wed Oct 06, 2004 7:19 pm, edited 1 time in total.

Top

sootzoo

Post subject:

Posted: Wed Oct 06, 2004 7:12 pm

Joined: Tue Oct 05, 2004 6:59 pm

Posts: 15

Location: Philadelphia, PA

Here are a few interesting highlights:

Code:

Oct  6 22:39:11 mythtv insmod: /lib/modules/2.4.25-chw/kernel/drivers/media/video/bttv.o: init_module: No such device
Oct  6 22:39:11 mythtv insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.       You may find more information in syslog or the output from dmesg
Oct  6 22:39:11 mythtv insmod: /lib/modules/2.4.25-chw/kernel/drivers/media/video/bttv.o: insmod bttv failed
Oct  6 22:39:11 mythtv modprobe: modprobe: Can't locate module rivatv

And also this:

Code:

Oct 6 22:39:22 mythtv modprobe: modprobe: Can't locate module char-major-81-2

Your module settings are probably wrong. From what I've seen they can get very picky about the order they're loaded in, etc. Can you see the card in lspci or /proc/pci ? Are the modules loaded when you do an lsmod?

Top

sootzoo

Post subject:

Posted: Wed Oct 06, 2004 7:15 pm

Joined: Tue Oct 05, 2004 6:59 pm

Posts: 15

Location: Philadelphia, PA

Also, if you have /etc/modutils/bttv (or if the module load options are set elsewhere) this might be helpful.

Good luck!

Top

turpie

Post subject:

Posted: Wed Oct 06, 2004 7:41 pm

Joined: Wed Apr 28, 2004 10:42 pm

Posts: 405

Location: Bendigo, Victoria, Australia

Mark,
Are you able to schedule a recording, then watch the completed recording on your Windows machine? I can't test this myself as my mythtv box is currently at work where I don't have an antenna connection.
If the recording works, then the bttv modules shouldn't matter.

I think it must be something to do with the way mythtv displays recorded tv, as it happen with both Live and prerecorded tv.

Paul T.

_________________
Paul Turpie
-------------
<--Is your location in your profile? Why not?

Top

tjc

Post subject:

Posted: Wed Oct 06, 2004 9:17 pm

Joined: Thu Mar 25, 2004 11:00 am

Posts: 9551

Location: Arlington, MA

turpie wrote:

I seem to be having the same problem as markm.

When I tried running the FE from an xterm I got the following:

Quote:

Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
...

Could it be something to do with the nvidia drivers that we are both using?

Search for a post by me on how to fix the GLX thing. The Nvidia installer leaves an extra bogus libnvidia-tls around that you have to clean up. Once you've done that, uncomment the line in your XF86Config-4.

Top

Xsecrets

Post subject:

Posted: Wed Oct 06, 2004 9:18 pm

Joined: Mon Oct 06, 2003 10:38 am

Posts: 4978

Location: Nashville, TN

ok next time when you are trying to kill the frontend from putty use killall -9 mythfrontend if it doesn't die then it's pretty messed up.

the other thing that I see in there is something about the rivatv what is that all about did you try to load some different drivers or something?

_________________
Have a question search the forum and have a look at the KnoppMythWiki.

Xsecrets

Top

Page 1 of 2

[ 26 posts ]

Go to page 1, 2 Next

Board index KnoppMyth General

All times are UTC - 6 hours

Who is online

Users browsing this forum: No registered users and 8 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum