Setup

Chaintech nif2 board
pvr250 (Haven't installed Yet)
BT878 card
sempron 2300
512 ram
samsung dvd
160 gb h drive

r5A15

I have been searching the forums for my sound problem
1 sound does not stop when exiting myth tv
2 sound ahead of video

After reading the forums I realize that the sound sync is caused by the buffering and tried this fix

$ amixer set Master,0 100%,100% unmute
$ amixer set PCM,0 100%,100% unmute
$ amixer set Line,0 75%,75% mute captur
$ amixer set Capture,0 100%,100% captur
$ su
# alsactl store
# exit
$

No sound now!! But hey I am using the cd input on the motherboard for my sound so I need to set that for the capture device change line to CD.....No such device error tried alsamixer set cd in there to capture....
Still no sound.

I am assuming both problems are related any help would be appreciated.

I will continue to search but am getting frustrated so I thought I would risk being flamed for not looking enough.

Thanks

Ok as long as I am asking

My DVD is not recognized it is a slave on IDE1 (hdb?) sorry linux newb
I have not looked for this much yet but if you happen to have a suggestion.

I was used for the install so at that point it was recognized but will not play DVD's or CD's

Thanks

You apt to get flamed for posting another problem under the same thread. You need to symlink /dev/hdb to /dev/cdrom and /dev/dvd (The next release will take care of CD-ROM drives that are not on /dev/hdb...). More info is on the forum.

_________________
cesman

When the source is open, the possibilities are endless!