| Author |
Message |
|
coreyt
|
 Posted: Sun May 15, 2005 7:41 pm |
|
|
Joined: Mon May 02, 2005 9:48 am
Posts: 36
|
I've gotten my firefly remote to work 
to get it going just hook it up then as root
/etc/init.d/lirc start
use the following config
Code: # Please make this file available to others
# by sending it to <lirc@bartelmus.de>
#
# this config file was automatically generated
# using lirc-0.7.1pre2(any) on Sun May 15 15:11:23 2005
#
# contributed by Corey Touchet
#
# brand: Snapstream Firefly
# model no. of remote control: R1000
# devices being controlled by this remote: Mythtv
#
begin remote
name test3.conf
bits 40
eps 30
aeps 100
one 0 0
zero 0 0
gap 147981
toggle_bit 0
begin codes
CLOSE 0x1457020000
CLOSE 0x14D7820000
MAXIMIZE 0x14812C0000
MAXIMIZE 0x1401AC0000
1 0x14620D0000
1 0x14E28D0000
2 0x14630E0000
2 0x14E38E0000
3 0x14640F0000
3 0x14E48F0000
4 0x1465100000
4 0x14E5900000
5 0x1466110000
5 0x14E6910000
6 0x1467120000
6 0x14E7920000
7 0x1468130000
7 0x14E8930000
8 0x1469140000
8 0x14E9940000
9 0x146A150000
9 0x14EA950000
0 0x146C170000
0 0x14EC970000
BACK 0x146B160000
BACK 0x14EB960000
ENT 0x146D180000
ENT 0x14ED980000
V+ 0x145E090000
V+ 0x14DE890000
V- 0x14DD880000
V- 0x145D080000
CH+ 0x14E08B0000
CH+ 0x14600B0000
CH- 0x14E18C0000
CH- 0x14610C0000
MUTE 0x14DF8A0000
MUTE 0x145F0A0000
INFO 0x1403AE0000
INFO 0x14832E0000
OPTION 0x1404AF0000
OPTION 0x14842F0000
PUP 0x14EF9A0000
PUP 0x146F1A0000
PLEFT 0x14F29D0000
PLEFT 0x14721D0000
PRIGHT 0x14F49F0000
PRIGHT 0x14741F0000
PDN 0x14F7A20000
PDN 0x1477220000
POK 0x14F39E0000
POK 0x14731E0000
MENU 0x14F19C0000
MENU 0x14711C0000
EXIT 0x14F5A00000
EXIT 0x1475200000
REC 0x14FCA70000
REC 0x147C270000
PLAY 0x14FAA50000
PLAY 0x147A250000
STOP 0x14FDA80000
STOP 0x147D280000
REW 0x14F9A40000
REW 0x1479240000
FWD 0x14FBA60000
FWD 0x147B260000
PREV 0x1400AB0000
PREV 0x14802B0000
PAUSE 0x14FEA90000
PAUSE 0x147E290000
NEXT 0x14FFAA0000
NEXT 0x147F2A0000
MUSIC 0x14DB860000
MUSIC 0x145B060000
PHOTOS 0x14DA850000
PHOTOS 0x145A050000
DVD 0x14D9840000
DVD 0x1459040000
TV 0x14D8830000
TV 0x1458030000
VIDEO 0x14DC870000
VIDEO 0x145C070000
HELP 0x14D6810000
HELP 0x1456010000
MOUSE 0x1402AD0000
MOUSE 0x14822D0000
A 0x14EE990000
A 0x146E190000
B 0x14F09B0000
B 0x14701B0000
C 0x14F6A10000
C 0x1476210000
D 0x14F8A30000
D 0x1478230000
end codes
end remote
Note: You see 2 entries for every code. This is becuase it toggles between keypresses so if the above config does not work use irrecord and follow the directions but when it comes to naming and entering keys you must name them twice in a row and be careful to hit the same key the second time around so you get the flipped code. then it's a matter of setting up your .lircrc file to map codes. I'm currently maping out one and I will post a update later. Anyone have a list of keyboard or commands? Could speed up my last step. I would like to see if this could also power on the computer eventually. Code:
|
|
| Top |
|
 |
|
avik42
|
Posted: Tue May 31, 2005 10:53 pm |
|
|
Joined: Tue May 31, 2005 1:19 am
Posts: 9
|
|
did anyone else get this working?
I am trying to get my Firefly to work. But when I say /etc/init.d/lirc start it loads up lirc_i2c ... hauppauge grey default if I am correct.
irw doesn't show Firefly being read.
|
|
| Top |
|
|
|
coreyt
|
Posted: Wed Jun 01, 2005 8:34 am |
|
|
Joined: Mon May 02, 2005 9:48 am
Posts: 36
|
|
you need to fire up lircd also
just use lircd --help and you'll see what to use..
lircd driver /path/to/config/file
|
|
| Top |
|
|
|
avik42
|
Posted: Wed Jun 01, 2005 3:52 pm |
|
|
Joined: Tue May 31, 2005 1:19 am
Posts: 9
|
|
lircd is already working. ps aux |grep lirc shows it's running
did what u suggested . that gives error. I think I may need to recompile lirc
|
|
| Top |
|
|
|
avik42
|
Posted: Wed Jun 01, 2005 4:32 pm |
|
|
Joined: Tue May 31, 2005 1:19 am
Posts: 9
|
Got it
|
|
| Top |
|
|
|
avik42
|
Posted: Wed Jun 01, 2005 4:44 pm |
|
|
Joined: Tue May 31, 2005 1:19 am
Posts: 9
|
|
Oki I can work my Hauppauge remote but no go with FireFly.
Are you using the FF USB base or are you using the Hauppauge one.
|
|
| Top |
|
|
|
avik42
|
Posted: Wed Jun 01, 2005 8:41 pm |
|
|
Joined: Tue May 31, 2005 1:19 am
Posts: 9
|
Got the remote working with irw
will post full details once I get my lircrc to work with mythtv.
Also walk through on how to get Firefly R1000-1 remote to work with KnoppMyth
|
|
| Top |
|
|
|
aspain
|
Posted: Fri Jun 10, 2005 3:14 am |
|
|
Joined: Fri May 06, 2005 6:31 am
Posts: 79
Location:
Spain
|
|
Hi!, do you know how to configure a Firefly on a knoppmyth R5A15.1 ?
|
|
| Top |
|
|
|
Domino
|
Posted: Tue Dec 06, 2005 12:33 am |
|
|
Joined: Thu Dec 01, 2005 3:12 pm
Posts: 14
|
|
I really appreciate the configs for the Firefly and Mythtv here. I’ve been trying to get mine to play well with each other for two days with no luck. I think I have the correct versions of all the config files, and I’ve put them into the right places, I think:
/etc/lirc/lircd.conf
/etc/lirc/lircmd.conf
/home/mythtv/.lircrc
and, for good measure:
/home/mythtv/.mythtv/lircrc
…but I can’t seem to get it working. I’ve been just trying to re-init the lircd daemon with
/etc/init.d/lirc restart
which appears to operate correctly. But still nothing happens when I press the Firefly’s buttons, either using irw or within Myth itself.
Can anyone offer any suggestions? I’d very much appreciate it.
_________________
-= Domino =-
Major Newbie
|
|
| Top |
|
|
|
cesman
|
Posted: Tue Dec 06, 2005 2:37 am |
|
|
Joined: Fri Sep 19, 2003 7:05 pm
Posts: 5088
Location:
Fontana, Ca
|
|
Note: ~/.lircrc should be symlinked to ~/.mythtv/lircrc.
_________________
cesman
When the source is open, the possibilities are endless!
|
|
| Top |
|
|
|
Domino
|
Posted: Wed Dec 07, 2005 2:13 am |
|
|
Joined: Thu Dec 01, 2005 3:12 pm
Posts: 14
|
|
It is. And I've rebooted, if that makes any difference.
Is this simply a matter of getting all the right configuration files in the correct places, or is there something I need to execute, rather than just edit?
_________________
-= Domino =-
Major Newbie
|
|
| Top |
|
|
|
Domino
|
Posted: Thu Dec 08, 2005 7:59 pm |
|
|
Joined: Thu Dec 01, 2005 3:12 pm
Posts: 14
|
|
Please? Anyone who actually has a working Firefly remote going with Myth? especially KnoppMyth?
I've found (I think) all the configuration files. I've put them in the right places. I've rebooted. I've restarted the lircd daemon. NOTHING.
On a lark, I fired up irrecord. It asks me to hold down an arbitrary button on the remote, which I did, to which it issued several "." characters in a row. Then it stopped and told me "irrecord: gap not found, can't continue."
I have most of MythTV set up now-- I watch and record, I can rip CD's and DVD's, and it's doing a great job. But I can't get this bloody remote operational, and I know some of you have, so-- please help?
_________________
-= Domino =-
Major Newbie
|
|
| Top |
|
|
|
gummybear
|
Posted: Sat Dec 10, 2005 4:40 pm |
|
|
Joined: Mon Jul 04, 2005 8:25 pm
Posts: 114
|
|
I used to have this working before I switched to the StreamZap.
Try to get irw working.
I think I had to start the daemon with the ati-driver.
However, I would have thought that the latest version of KnoppMyth had all this stuff sorted out and you could use the reconfigure script.
What version of KnoppMyth you using?
|
|
| Top |
|
|
|
Domino
|
Posted: Mon Dec 12, 2005 3:26 pm |
|
|
Joined: Thu Dec 01, 2005 3:12 pm
Posts: 14
|
|
I'm using the latest I could find, which was .5A26.
If there's a newer version with out-of-the-box support for the Firefly, I'd love it. I've gotten most other things working pretty well with this release, and it's really frustrating to have such a big piece of the puzzle still non-operational.
When you say, "I think I had to start the daemon with the ati-driver," what exactly do you mean? My head is swimming with all the things I've tried in the last two week sto try to get this thing working, so maybe I missed a commandline option or something.
_________________
-= Domino =-
Major Newbie
|
|
| Top |
|
|
|
Domino
|
Posted: Tue Dec 13, 2005 5:55 pm |
|
|
Joined: Thu Dec 01, 2005 3:12 pm
Posts: 14
|
Got it working! It was nothing extraordinary, just a big error on one of the configuration files I got off the web. Thanks all, for the help. My remote seems so small and light after having to use my wireless keyboard for a couple of weeks. 
EDIT:
Actually, it was the configuration at the top of this thread that was the problem! Be sure to replace the remote name of "test3.conf" with the correct name for the Firefly. I'm at work so I don't have the correct name in front of me, but it's something similar to "SNAPSTREAM_FIREFLY_1000" or the like.
_________________
-= Domino =-
Major Newbie
|
|
| Top |
|
|
View unanswered posts
View active topics
KnoppMyth 
Print view
Previous topic Next topic 
LinHES Home
Board index
FAQ
Search
Login 
Register