View unanswered posts    View active topics

Board index KnoppMyth Hardware

All times are UTC - 6 hours





Post new topic Reply to topic  Page 1 of 1
  [ 3 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
mickwish
 Post subject: Can't play DVD's
PostPosted: Mon Jul 11, 2005 7:53 pm 
Offline
Joined: Mon Jul 04, 2005 5:30 pm
Posts: 28
Location: Adelaide, Australia
My KnoppMyth R5A16 install has stopped letting me play DVD's Dunno what I did, but I could ceratinly play DVD's last night. Have been trying to get MythTV playing on TV (works fine on monitor) so I've been mucking about with XF86Config, but don't think I touched anything else.

It's not the symlink prob that's been raised before:

Code:
root@mythtv:~# ls -al /dev/dvd /dev/cdrom /dev/scd0 /dev/hdc
lrwxrwxrwx  1 root cdrom     8 Jul 12 10:22 /dev/cdrom -> /dev/hdc
lrwxrwxrwx  1 root cdrom     8 Jul 12 10:22 /dev/dvd -> /dev/hdc
brw-rw----  1 root cdrom 22, 0 May  7  2004 /dev/hdc
brw-rw----  1 root cdrom 11, 0 May  7  2004 /dev/scd0


When I try to run xine as root in xterm it actually opens the player, but when I go to read a DVD it gives an error that says:

Code:
The source can't be read.
Maybe you don't have enopugh rights for this, or source doesn't contain data (eg disc not in drive).
(/cdrom/video_ts/vts_o1_0.vob)


The when I exit xterm it has this in it:


Code:
*** libdvdread: CHECK_VALUE failed in ifo_read.c:669 ***
*** for pgc->cell_position_offset != 0 ***


*** libdvdread: CHECK_VALUE failed in ifo_read.c:649 ***
*** for pgc->nr_of_programs <= pgc->nr_of_cells ***


*** libdvdread: CHECK_VALUE failed in ifo_read.c:667 ***
*** for pgc->program_map_offset != 0 ***


*** libdvdread: CHECK_VALUE failed in ifo_read.c:669 ***
*** for pgc->cell_position_offset != 0 ***

ASSERT ERROR: file util.c: line 174 (to_bcd8): assertion failed: (n < 100)
ASSERT ERROR: file util.c: line 174 (to_bcd8): assertion failed: (n < 100)
ASSERT ERROR: file util.c: line 174 (to_bcd8): assertion failed: (n < 100)
ASSERT ERROR: file util.c: line 174 (to_bcd8): assertion failed: (n < 100)
ASSERT ERROR: file util.c: line 174 (to_bcd8): assertion failed: (n < 100)
ASSERT ERROR: file util.c: line 174 (to_bcd8): assertion failed: (n < 100)



I don't think it's a permission issue, myself.

Code:
root@mythtv:~# grep mythtv /etc/group
cdrom:*:24:mythtv,mwishart
audio:!:29:mythtv,mwishart
video:!:44:mythtv,mwishart
mythtv:x:105:


Any ideas what need to do to fix this?

Thanks
Mick
Top
 Profile  
 
Liv2Cod
 Post subject:
PostPosted: Tue Jul 12, 2005 1:43 am 
Offline
Joined: Fri May 21, 2004 11:55 pm
Posts: 1206
Location: Silicon Valley, CA
Have you checked out the doc files included on the system? Look carefully in the directory /usr/share/doc/libdvdread3/examples. I think you'll find everything you need there.

_________________
Do you code to live, or live to code?
Search LinHES forum through Google
Top
 Profile  
 
mickwish
 Post subject:
PostPosted: Tue Jul 12, 2005 6:24 am 
Offline
Joined: Mon Jul 04, 2005 5:30 pm
Posts: 28
Location: Adelaide, Australia
Thank you!! That was the issue. The DVD I tried the night before mustn't have been encoded that way (it was a local Soapie episode). :roll:

Thanks for taking the time to help.

Cheers
mick
Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 3 posts ] 


Board index KnoppMyth Hardware

All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 20 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu