Hello,
I just installed MythTV V5R16 on my ASUS Terminator K7. (Via chipset I believe if it matters)
Everything was pretty straightforward, my tv out and remote are working fine. My problem is that when I go to watch live TV I see nothing but static. I have read some posts recommending upgrading IVTV to support newer tuners which I did, I think.
My tuner is
Code:
lspci | grep MPEG
0000:00:0f.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)
and from my logs
Code:
dmesg | grep ivtv
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.3 (k) loading
ivtv: Linux version: 2.6.11.9-chw-2 SMP preempt 586 gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 350 card
ivtv: Found an iTVC15 based chip
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: XXX PCI device: 0x0740 vendor: 0x1039
ivtv: i2c attach [client=tveeprom[50],ok]
ivtv: i2c attach [client=Hauppauge IR,ok]
msp34xx: ivtv version
ivtv: i2c attach [client=MSP3448W-A2,ok]
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
ivtv: i2c attach [client=saa7115[50],ok]
ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model 0x00ad2598, Revision 0x00000001
ivtv: Radio detected
ivtv: Failed to load module tuner
ivtv: i2c attach [client=saa7127[0],ok]
ivtv: i2c attach [client=tda9887,ok]
ivtv: Encoder revision: 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 350 card with 10 streams
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 0 using 1024 16384 byte buffers 0 kbytes total
ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers 16777216 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create DMA stream 1
ivtv: Allocate DMA stream 1
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 2 using 80 52224 byte buffers 0 kbytes total
ivtv: Allocate DMA stream 2 using 80 52224 byte buffers 4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total
ivtv: Allocate DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Create stream 4
ivtv: Allocate stream 4
ivtv: Registered v4l2 device, streamtype 5 minor 16
ivtv: Create DMA stream 5 using 16 65536 byte buffers 0 kbytes total
ivtv: Allocate DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total
ivtv: Registered v4l2 device, streamtype 6 minor 228
ivtv: Create DMA stream 6 using 2048 2048 byte buffers 0 kbytes total
ivtv: Allocate DMA stream 6 using 2048 2048 byte buffers 262144 kbytes total
ivtv: Registered v4l2 device, streamtype 7 minor 232
ivtv: Create stream 7
ivtv: Allocate stream 7
ivtv: Registered v4l2 device, streamtype 8 minor 48
ivtv: Create DMA stream 8 using 24 86400 byte buffers 0 kbytes total
ivtv: Allocate DMA stream 8 using 24 86400 byte buffers 2097152 kbytes total
ivtv: Create DMA stream 9 using 32 65536 byte buffers 0 kbytes total
ivtv: Setting Tuner 47
ivtv: i2c client id: 0x02 not found!
ivtv: i2c client id: 0x02 not found!
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to NTSC.
ivtv: i2c client id: 0x02 not found!
ivtv: ivtv_enc_thread: pid = 2745, itv = 0xceba20a0
ivtv: ivtv_dec_thread: pid = 2746, itv = 0xceba20a0
ivtv: Initialized WinTV PVR 350, card #0
ivtv: ==================== END INIT IVTV ====================
ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0)
ivtv-osd: Framebuffer is at decoder-relative address 0x00510000 and has 1704960 bytes.
ivtv-osd: screen coords: [0 0] -> [720 480]
ivtv-osd: original global alpha = 208
ivtv-osd: current OSD state = 39
ivtv-osd: new global alpha = 208 (1 255 0)
ivtv-osd: framebuffer at 0xe9510000, mapped to 0xcfa10000, size 1350k
ivtv-osd: mode is 720x480x32, linelength=2880
ivtv-osd: fb0: iTVC15 TV out frame buffer device
ivtv: Allocate DMA stream 9 using 32 65536 byte buffers 2097152 kbytes total
ivtv: Setting audio matrix to input 1, output 1
ivtv: Setting audio matrix to input 3, output 1
ivtv: i2c client id: 0x02 not found!
I have a feeling that I messed up something in ivtv so I will also ask in advance what my tuner type should be in the ivtv config file. Is there a default tuner that I can use with limited functionality so verify if everything software wise is working?