View unanswered posts    View active topics

All times are UTC - 6 hours





Post new topic Reply to topic  [ 37 posts ] 
Go to page 1, 2, 3  Next

Print view Previous topic   Next topic  
Author Message
Search for:
PostPosted: Fri Aug 19, 2005 11:36 pm 
Offline
Joined: Fri Sep 19, 2003 7:05 pm
Posts: 5088
Location: Fontana, Ca
Please post the output of lspci -vv if you have one of these cards. I'm only interested in the portion concerning the card. Here is an example:

Quote:
0000:01:07.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR-350
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 19
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

I'm primarily interested in the first two lines. If your card isn't id, please let me know which card(s) you have along with the output.

Thanks,

_________________
cesman

When the source is open, the possibilities are endless!


Top
 Profile  
 
 Post subject:
PostPosted: Sat Aug 20, 2005 4:53 am 
Offline
Joined: Tue Apr 13, 2004 6:51 pm
Posts: 890
Location: Groton, MA
Quote:
0000:02:00.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR-250
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x10 (64 bytes)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:02:02.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc.: Unknown device 4801
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x10 (64 bytes)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-



funny the second one says Unknown device 4801. Is that bad? seems to be working fine...it's a 250 of some flavor

_________________
R5F1 - Dell P4 2.4Ghz 500MB - PVR250 x 2 - GeForce FX 5200 - Onboard sound/NIC 80GB ATA/250GB ATA/400GB SATA


Top
 Profile  
 
 Post subject:
PostPosted: Sat Aug 20, 2005 7:44 am 
Offline
Joined: Fri Mar 26, 2004 9:00 am
Posts: 239
0000:05:09.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR 250
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x10 (64 bytes)
Interrupt: pin A routed to IRQ 18
Region 0: Memory at 14000000 (32-bit, prefetchable) [size=64M]
Capabilities: <available only to root>

0000:05:0a.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR 250
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x10 (64 bytes)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: <available only to root>


Top
 Profile  
 
 Post subject:
PostPosted: Sat Aug 20, 2005 9:41 am 
Offline
Joined: Sat Feb 26, 2005 9:05 am
Posts: 160
Location: Ipswich, UK
Quote:
0000:01:09.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR 250
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=64M]
Capabilities: <available only to root>


Mephi


Top
 Profile  
 
 Post subject:
PostPosted: Sat Aug 20, 2005 10:01 am 
Offline
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location: Arlington, MA
Quote:
0000:02:0a.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR 250
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-


Top
 Profile  
 
 Post subject:
PostPosted: Sat Aug 20, 2005 1:03 pm 
Offline
Joined: Sun Feb 08, 2004 8:03 am
Posts: 71
Location: Switzerland
Quote:
0000:01:08.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR-350
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Quote:
0000:01:0a.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR 250
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 18
Region 0: Memory at dc000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-


Top
 Profile  
 
 Post subject:
PostPosted: Sat Aug 20, 2005 8:12 pm 
Offline
Joined: Fri Dec 10, 2004 10:18 am
Posts: 22
Quote:
0000:01:08.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR 250
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

_________________
Running : KnoppMyth R5A12

ABIT NV7-133R
512MB Crucial
PVR-250 35062 (CX23416 - SAA7115) Tuner Type 50
Maxtor 250 GB x2


Top
 Profile  
 
 Post subject:
PostPosted: Sat Aug 20, 2005 9:05 pm 
Offline
Joined: Fri Jan 09, 2004 8:30 pm
Posts: 146
Location: Reno, NV
PVR-250

Code:
0000:02:0c.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)
        Subsystem: Hauppauge computer works Inc. WinTV PVR-350
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin A routed to IRQ 12
        Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-


Top
 Profile  
 
 Post subject:
PostPosted: Sun Aug 21, 2005 6:57 am 
Offline
Joined: Sat Apr 17, 2004 9:28 am
Posts: 56
Location: St. Louis, Missouri
PVR-250
Code:
0000:01:08.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
        Subsystem: Hauppauge computer works Inc. WinTV PVR 250
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at d4000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

_________________
Chaintech 7NIF2
AMD Athlon XP 2200
PVR 250
80 + 20 Gig of Storage
512 MB memory


Top
 Profile  
 
 Post subject:
PostPosted: Sun Aug 21, 2005 7:53 am 
Offline
Joined: Mon May 02, 2005 2:45 am
Posts: 8
Code:
0000:02:07.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
        Subsystem: Hauppauge computer works Inc. WinTV PVR 250
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:02:08.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
        Subsystem: Hauppauge computer works Inc. WinTV PVR 250
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at dc000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-


Top
 Profile  
 
 Post subject:
PostPosted: Sun Aug 21, 2005 8:59 am 
Offline
Joined: Fri Apr 02, 2004 10:08 am
Posts: 1637
Location: Virginia, USA
Code:
0000:01:06.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)
        Subsystem: Hauppauge computer works Inc. WinTV PVR-350
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at d4000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:01:08.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)
        Subsystem: Hauppauge computer works Inc.: Unknown device 4801
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at d8000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-


the last card is my PVR-250, I guess; it's old, not sure why it's not being recognized.


Top
 Profile  
 
 Post subject:
PostPosted: Sun Aug 21, 2005 9:38 am 
Offline
Joined: Sun Nov 14, 2004 10:04 am
Posts: 263
Location: Toronto, Canada
Code:
0000:01:06.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
        Subsystem: Hauppauge computer works Inc.: Unknown device 8003
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at d0000000 (32-bit, prefetchable)
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-


My card is a PVR-150.

_________________
KnoppMyth R5C7
Abit NF7-S
Athlon XP Mobile 2500+
Hauppauge PVR-150 + PVR-150MCE
nVidia Geforce 6600GT
Samsung Spinpoint SATA 120GB
NEC ND-3520A DVD
Seasonic Super Tornado 350
BTC 9019URF Wireless Kbd. w. Joystick


Top
 Profile  
 
 Post subject:
PostPosted: Sun Aug 21, 2005 9:57 am 
Offline
Joined: Mon Oct 06, 2003 10:38 am
Posts: 4978
Location: Nashville, TN
Code:
0000:02:04.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)
        Subsystem: Hauppauge computer works Inc. WinTV PVR-250
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at f0000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

_________________
Have a question search the forum and have a look at the KnoppMythWiki.

Xsecrets


Top
 Profile  
 
 Post subject:
PostPosted: Sun Aug 21, 2005 1:37 pm 
Offline
Joined: Fri Jun 11, 2004 6:39 am
Posts: 20
Location: Zurich, Switzerland
PVR-350

Code:
0000:01:06.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)
        Subsystem: Hauppauge computer works Inc. WinTV PVR-350
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at d4000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

_________________
Shuttle SN41G2V2
AMD Athlon XP-3000+
Lite-On 832S IDE, +/-R
200 GB Western Digital
Hauppauge PVR-350
Xbox Frontend


Top
 Profile  
 
 Post subject:
PostPosted: Sun Aug 21, 2005 3:44 pm 
Offline
Joined: Tue May 10, 2005 9:57 pm
Posts: 21
Code:
02:08.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
        Subsystem: Hauppauge computer works Inc.: Unknown device e807
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (32000ns min, 2000ns max), Cache Line Size 08
        Interrupt: pin A routed to IRQ 193
        Region 0: Memory at dc000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:09.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
        Subsystem: Hauppauge computer works Inc.: Unknown device e817
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (32000ns min, 2000ns max), Cache Line Size 08
        Interrupt: pin A routed to IRQ 177
        Region 0: Memory at d8000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-


PVR 500...not running Knoppmyth, but hope it helps


Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 37 posts ] 
Go to page 1, 2, 3  Next



All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 15 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu