View unanswered posts    View active topics

Board index KnoppMyth Hardware

All times are UTC - 6 hours





Post new topic Reply to topic  Page 2 of 3
  [ 31 posts ] 
Go to page Previous  1, 2, 3  Next
Print view Previous topic   Next topic  
Author Message
Search for:
Mythuser
 Post subject:
PostPosted: Fri Sep 09, 2005 10:22 pm 
Offline
Joined: Thu Sep 08, 2005 8:41 pm
Posts: 20
Im running KnoppMyth R5A16.
Top
 Profile  
 
shplad
 Post subject:
PostPosted: Sun Sep 11, 2005 8:51 am 
Offline
Joined: Sun Nov 14, 2004 10:04 am
Posts: 263
Location: Toronto, Canada
Mythuser:

Thanks again for your help. Interesting, I checked the firmware.agent
file and also have:

Code:

FIRMWARE_DIRS="/lib/firmware /usr/local/lib/firmware /usr/lib/hotplug/firmware"


but only the /usr/lib/hotplug/firmware directory exists.

So, is this my problem? Is it possible some directories weren't created on install or ?? Any help appreciated.


Shplad

_________________
KnoppMyth R5C7
Abit NF7-S
Athlon XP Mobile 2500+
Hauppauge PVR-150 + PVR-150MCE
nVidia Geforce 6600GT
Samsung Spinpoint SATA 120GB
NEC ND-3520A DVD
Seasonic Super Tornado 350
BTC 9019URF Wireless Kbd. w. Joystick
Top
 Profile  
 
Mythuser
 Post subject:
PostPosted: Sun Sep 11, 2005 10:59 am 
Offline
Joined: Thu Sep 08, 2005 8:41 pm
Posts: 20
Hmmm, mine were there on install. Are you using R5A16? Regardless you can just make the directory and copy the firmware files there. It wont hurt anything.

mkdir -p /lib/firmware

Try that out and see if hotplug loads the firmware correctly. Hope that helps!
Top
 Profile  
 
cesman
 Post subject:
PostPosted: Sun Sep 11, 2005 11:51 am 
Offline
Joined: Fri Sep 19, 2003 7:05 pm
Posts: 5088
Location: Fontana, Ca
The firmware for ivtv belong in /lib/modules/.

_________________
cesman

When the source is open, the possibilities are endless!
Top
 Profile  
 
shplad
 Post subject:
PostPosted: Sun Sep 11, 2005 11:57 am 
Offline
Joined: Sun Nov 14, 2004 10:04 am
Posts: 263
Location: Toronto, Canada
Thanks-both of you.

But the firmware is still not loading. I am really clueless as to what to do at this point.

Help!

shplad

_________________
KnoppMyth R5C7
Abit NF7-S
Athlon XP Mobile 2500+
Hauppauge PVR-150 + PVR-150MCE
nVidia Geforce 6600GT
Samsung Spinpoint SATA 120GB
NEC ND-3520A DVD
Seasonic Super Tornado 350
BTC 9019URF Wireless Kbd. w. Joystick
Top
 Profile  
 
Mythuser
 Post subject:
PostPosted: Sun Sep 11, 2005 12:05 pm 
Offline
Joined: Thu Sep 08, 2005 8:41 pm
Posts: 20
Post your demsg output from ivtv. Did you make sure the firmware you extracted from pvr48wdm*.exe was correct for your hardware by checking the md5sums etc? Here is a link you can doublecheck:

http://ivtv.writeme.ch/tiki-print.php?p ... reVersions
Top
 Profile  
 
shplad
 Post subject:
PostPosted: Sun Sep 11, 2005 1:01 pm 
Offline
Joined: Sun Nov 14, 2004 10:04 am
Posts: 263
Location: Toronto, Canada
Mythuser:

Thanks for your continued patience and support.

Okay, here is my relevant dmesg output:
Code:

ivtv: NTSC tuner detected
ivtv: Radio detected
cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005)
cx25840: detecting client on address 0x88
cx25840: writing init values
cx25840: Reset
cx25840: Boot
i2c_adapter i2c-0: sendbytes: error - bailout.
cx25840: Failed to upload FW chunk, size 1022, uploaded 7154 bytes.
cx25840: Failed to load any FW image file
cx25840: Status: cx258413 (DEVICE_ID)
ivtv: i2c attach [client=cx25840[50],ok]
ivtv: i2c attach [client=wm8775[50],ok]
tda9887: Ignoring new-style parameters in presence of obsolete ones
ivtv: Encoder revision: 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 0 using 1024 16384 byte buffers  0 kbytes total
ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers  16777216 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create DMA stream 1
ivtv: Allocate DMA stream 1
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create stream 2 using 40 52224 byte buffers  0 kbytes total
ivtv: Allocate stream 2 using 40 52224 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create DMA stream 3 using 455 4608 byte buffers  0 kbytes total
ivtv: Allocate DMA stream 3 using 455 4608 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Create stream 4
ivtv: Allocate stream 4
ivtv: Setting Tuner 50
tuner: type set to 50 (TCL 2002N) by ivtv i2c driver #0
cx25840: decoder set input (6)
cx25840: Tuner Input
cx25840: set audio: 0x01
ivtv: Switching standard to NTSC.
ivtv: i2c client addr: 0x43 not found!
cx25840: decoder set norm NTSC
cx25840: set audio: 0x01
ivtv: Initialized WinTV PVR 150, card #0
ivtv: ====================  END INIT IVTV  ====================
ivtv: ivtv_enc_thread: pid = 2132, itv = 0xd0c4b3a0



I also originally tried the firmware that came off my Hauppauge CD, but had exactly the same problem.

As for the MD5sums, yes, I've checked, and they are accurate.



Mythuser wrote:
Post your demsg output from ivtv. Did you make sure the firmware you extracted from pvr48wdm*.exe was correct for your hardware by checking the md5sums etc? Here is a link you can doublecheck:

http://ivtv.writeme.ch/tiki-print.php?p ... reVersions

_________________
KnoppMyth R5C7
Abit NF7-S
Athlon XP Mobile 2500+
Hauppauge PVR-150 + PVR-150MCE
nVidia Geforce 6600GT
Samsung Spinpoint SATA 120GB
NEC ND-3520A DVD
Seasonic Super Tornado 350
BTC 9019URF Wireless Kbd. w. Joystick
Top
 Profile  
 
Mythuser
 Post subject:
PostPosted: Sun Sep 11, 2005 1:28 pm 
Offline
Joined: Thu Sep 08, 2005 8:41 pm
Posts: 20
is i2c_core loaded? look for it in lsmod. I would be concerned about this error:

i2c_adapter i2c-0: sendbytes: error - bailout
Top
 Profile  
 
shplad
 Post subject:
PostPosted: Sun Sep 11, 2005 2:24 pm 
Offline
Joined: Sun Nov 14, 2004 10:04 am
Posts: 263
Location: Toronto, Canada
Yes, according to lsmod,

i2c_core
i2c_algo_bit

are both loaded.


shplad

_________________
KnoppMyth R5C7
Abit NF7-S
Athlon XP Mobile 2500+
Hauppauge PVR-150 + PVR-150MCE
nVidia Geforce 6600GT
Samsung Spinpoint SATA 120GB
NEC ND-3520A DVD
Seasonic Super Tornado 350
BTC 9019URF Wireless Kbd. w. Joystick
Top
 Profile  
 
tjc
 Post subject:
PostPosted: Sun Sep 11, 2005 9:14 pm 
Offline
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location: Arlington, MA
cesman wrote:
The firmware for ivtv belong in /lib/modules/.

Apparently in the more recent ivtv 0.3.??? driver series someone made a change to use the hotplug mechanism and search path for this. For folks who need to use 0.3.??? to get a newer PVR-150,250,500 working this may need to be taken into account... It might be as simple as adding /lib/modules to the hotplug search list.
Top
 Profile  
 
cesman
 Post subject:
PostPosted: Sun Sep 11, 2005 9:29 pm 
Offline
Joined: Fri Sep 19, 2003 7:05 pm
Posts: 5088
Location: Fontana, Ca
Interesting... Thanks for that tidbid of info. I've done this for the next release.

_________________
cesman

When the source is open, the possibilities are endless!
Top
 Profile  
 
shplad
 Post subject:
PostPosted: Mon Sep 12, 2005 8:37 am 
Offline
Joined: Sun Nov 14, 2004 10:04 am
Posts: 263
Location: Toronto, Canada
Huh? Can you please clarify what the repercussions are for this newbie?

How do I manage to get the firmware loaded? I know it can be done, since
there are others with R5A12 using a PVR-150.

Please clarify.

Thanks


shplad


tjc wrote:
Apparently in the more recent ivtv 0.3.??? driver series someone made a change to use the hotplug mechanism and search path for this. For folks who need to use 0.3.??? to get a newer PVR-150,250,500 working this may need to be taken into account... It might be as simple as adding /lib/modules to the hotplug search list.

_________________
KnoppMyth R5C7
Abit NF7-S
Athlon XP Mobile 2500+
Hauppauge PVR-150 + PVR-150MCE
nVidia Geforce 6600GT
Samsung Spinpoint SATA 120GB
NEC ND-3520A DVD
Seasonic Super Tornado 350
BTC 9019URF Wireless Kbd. w. Joystick
Top
 Profile  
 
cesman
 Post subject:
PostPosted: Mon Sep 12, 2005 10:51 am 
Offline
Joined: Fri Sep 19, 2003 7:05 pm
Posts: 5088
Location: Fontana, Ca
It means I've added /lib/modules to firmware.agent.

_________________
cesman

When the source is open, the possibilities are endless!
Top
 Profile  
 
shplad
 Post subject:
PostPosted: Mon Sep 12, 2005 10:55 am 
Offline
Joined: Sun Nov 14, 2004 10:04 am
Posts: 263
Location: Toronto, Canada
Okay, and sooo.....that will fix my problem too in R5A12 or ??


shplad

cesman wrote:
It means I've added /lib/modules to firmware.agent.

_________________
KnoppMyth R5C7
Abit NF7-S
Athlon XP Mobile 2500+
Hauppauge PVR-150 + PVR-150MCE
nVidia Geforce 6600GT
Samsung Spinpoint SATA 120GB
NEC ND-3520A DVD
Seasonic Super Tornado 350
BTC 9019URF Wireless Kbd. w. Joystick
Top
 Profile  
 
cesman
 Post subject:
PostPosted: Mon Sep 12, 2005 11:44 am 
Offline
Joined: Fri Sep 19, 2003 7:05 pm
Posts: 5088
Location: Fontana, Ca
I have no idea. I added this to the next release per tjc comment. Since the next release will contain ivtv 0.3.8 (if it passes the mustard). In test so far, I had no issues with the firmware loading.

_________________
cesman

When the source is open, the possibilities are endless!
Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 3
  [ 31 posts ] 
Go to page Previous  1, 2, 3  Next


Board index KnoppMyth Hardware

All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 18 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu