Please, please, help me, don't delete my questions, tell me something, i'm here, i have one month with mythtv and linux, please, i think the world open source is good but now i think another thing.
I have a silly head looking in google, i need change something in bttv to recognize my card, i need put card=1 and tuner=0, in debian and ubuntu works well i installed 4 distros and reinstalled 15 times.
Please help me !!!
Where can i put this options in Knoppmyth i don't find anywhere, i put this options in /etc/mythtv/modules/bttv i make an rmmod bttv an modprobe bttv, i reboot the pc but nothing, when i make an dmesg i find an unrecognized card.
PLEASE, PLEASE, CAN I HELP ME ????

Keep posting multiple times and you post WILL get deleted.

I don't understand what you are saying. Does the card work in Debian (and Ubuntu)? What type of card is it? Do you know if the card works with Linux at all?

_________________
cesman

When the source is open, the possibilities are endless!

My post is all deleted, but i don´t understand why, and this is the reason for i put the same post only two times, i don't understand what is the reason for my post are deleted many times and anything tell me something, if my poor english and little knowledge of linux and mythtv makes post in wrong way, i'm sorry, but i think if you don't tell me i don't learn it.
I have and old MIRO PCTV, (pre-Pinnacle), in debian and ubuntu, works well with card=1 and tuner=0, and in Knoppmyth don't works well, sorry i've obtained see the tv, but the audio i hear is the line-in, don't save the audio, i have the record on line-in and if i muted the line i don't hear nothing, i hear the line-in but never mythtv save the audio.

In bttv i put this lines(i see in another post):

root@mythtv:/etc/mythtv/modules# cat bttv
alias char-major-81 videodev
alias char-major-81-0 bttv
alias char-major-81-1 tvaudio
options bttv card=1 pll=0 tuner=0

Dmesg out this:

Linux video capture interface: v1.00
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI interrupt 0000:02:0d.0[A] -> GSI 5 (level, low) -> IRQ 5
bttv0: Bt848 (rev 18) at 0000:02:0d.0, irq: 5, latency: 64, mmio: 0xf8001000
bttv0: using: MIRO PCTV [card=1,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00ff07ff [init]
tuner 0-0060: chip found @ 0xc0 (bt848 #0 [sw])
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: miro: id=1 tuner=0 radio=no stereo=no
bttv0: using tuner=0
tuner 0-0060: type set to 0 (Temic PAL (4002 FH5))
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6320,tea6420,tda8425,pic16c54 (PV951),ta8874z
bttv0: i2c: checking for TDA9887 @ 0x86... not found
bttv0: registered device video0
bttv0: registered device vbi0

and lspci out this:

0000:02:0d.0 Multimedia video controller: Brooktree Corporation Bt848 Video Capture (rev 12)

I don't have ACPI and is the only card with this IRQ 5, i test with SB Live 5.1 and now i have and easy on-board audio, never can't save the audio tv.

P.D.:
Cesman i understand you, in my job i'm the the teacher and i hate tell me many times the same question or don't works to find the answer, many times "I put myself of the bad humor" but i know this is not the solution, Cesman you are make and excellent job to world open source (i think), surely that nobody imagines the lot of time you spend in make knoppmyth and coverall the patience to answer all questions, but please do you have a little good with newbies.
Sorry for my poor english.

I think I do great with newbies... I gave them KnoppMyth. This post wasn't deleted was it?

Simple rules:
KnoppMyth -> Installation. Read the read me. It clearly states...
Don't post the same topic in multiple areas of the forum, it will be deleted (period).
Whatever simple rule I decide to add in the future.


A Google of miro pctv shows a great number of hits. Have you tried searching on Google?

Try card=11. Edit /etc/myth/modules/bttv then reboot.[/code]

_________________
cesman

When the source is open, the possibilities are endless!

Hi Cesman, its ok, finally its work, uf !!!!
I'm work now in make an idiot guide for newbies like me, i put in this forum when its finish.
Thks a lot.

There are 15 diferent PCTV, my card is an card=1 & tuner=0, this work, yes i search in google, i have one month search in google and test distros, 20 times reinstall and i spend more hours to search and work in mythtv.
This link is fantastic, please put in site we all see.
http://www.bttv-gallery.de/

You're welcome.

_________________
cesman

When the source is open, the possibilities are endless!