View unanswered posts    View active topics

Board index KnoppMyth General

All times are UTC - 6 hours





Post new topic Reply to topic  Page 3 of 3
  [ 37 posts ] 
Go to page Previous  1, 2, 3
Print view Previous topic   Next topic  
Author Message
Search for:
quitetrite
 Post subject: lspci -vv for my pvr-150
PostPosted: Wed Aug 31, 2005 12:57 pm 
Offline
Joined: Wed Aug 31, 2005 12:44 pm
Posts: 1
Code:
0000:01:06.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
        Subsystem: Hauppauge computer works Inc.: Unknown device 8003
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (32000ns min, 2000ns max), cache line size 08
        Interrupt: pin A routed to IRQ 5
        Region 0: Memory at d4000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Top
 Profile  
 
fiete
 Post subject:
PostPosted: Mon Sep 05, 2005 1:39 pm 
Offline
Joined: Sun May 22, 2005 2:44 pm
Posts: 105
Location: The Netherlands
First card: Hauppauge 250 (PAL)
Quote:
0000:00:0b.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX2$
Subsystem: Hauppauge computer works Inc. WinTV PVR 250
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Ste$
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbor$
Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 19
Region 0: Memory at ec000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3ho$
Status: D0 PME-Enable- DSel=0 DScale=0 PME-


Second card: Hauppauge 150 (PAL, non MCE)
Quote:
0000:00:13.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX2$
Subsystem: Hauppauge computer works Inc.: Unknown device 8003
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Ste$
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbor$
Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3ho$
Status: D0 PME-Enable- DSel=0 DScale=0 PME-


I'm using ivtv 0.3.6i

Regards,
Fiete
Top
 Profile  
 
DarthFrog
 Post subject:
PostPosted: Wed Sep 07, 2005 2:50 am 
Offline
Joined: Tue May 10, 2005 6:57 pm
Posts: 3
PVR-150, doesn't work with yesterday's ivtv drivers.


0000:01:09.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc.: Unknown device 8801
Flags: medium devsel, IRQ 17
Memory at d0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <available only to root>
Top
 Profile  
 
ryanpatterson
 Post subject:
PostPosted: Sun Sep 11, 2005 6:13 am 
Offline
Joined: Fri Aug 26, 2005 9:54 pm
Posts: 617
pvr-350:
Code:
0000:01:09.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)
        Subsystem: Hauppauge computer works Inc. WinTV PVR-350
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x04 (16 bytes)
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

pvr-500:
Code:
0000:02:08.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
        Subsystem: Hauppauge computer works Inc.: Unknown device e807
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x04 (16 bytes)
        Interrupt: pin A routed to IRQ 21
        Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:02:09.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
        Subsystem: Hauppauge computer works Inc.: Unknown device e817
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x04 (16 bytes)
        Interrupt: pin A routed to IRQ 22
        Region 0: Memory at dc000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Top
 Profile  
 
Russ
 Post subject:
PostPosted: Thu Sep 15, 2005 7:30 am 
Offline
Joined: Fri Jan 21, 2005 9:14 am
Posts: 124
Location: New York
Two PVR-250 cards:

Code:
02:06.0 Multimedia video controller: Internext Compression Inc: Unknown device 0016 (rev 01)
        Subsystem: Hauppauge computer works Inc.: Unknown device 4009

        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (32000ns min, 2000ns max), cache line size 10
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at dc000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:08.0 Multimedia video controller: Internext Compression Inc: Unknown device 0016 (rev 01)
        Subsystem: Hauppauge computer works Inc.: Unknown device 4009
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (32000ns min, 2000ns max), cache line size 10
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Top
 Profile  
 
niels
 Post subject: lspci -vv PVR-150MCE
PostPosted: Fri Sep 16, 2005 1:44 pm 
Offline
Joined: Fri Sep 16, 2005 1:42 pm
Posts: 1
02:09.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc.: Unknown device 8801
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (32000ns min, 2000ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ec000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Mythtv running under Fedora Core 4
This is one of the cases of a PVR150 which does not record sound.
Top
 Profile  
 
tingo
 Post subject: PVR-500
PostPosted: Tue Sep 20, 2005 3:05 pm 
Offline
Joined: Mon Sep 19, 2005 4:41 am
Posts: 25
I have a PVR-500MCE (but I guess all 500's are MCE)
Code:
0000:02:08.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
        Subsystem: Hauppauge computer works Inc.: Unknown device e807
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at 44000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:02:09.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
        Subsystem: Hauppauge computer works Inc.: Unknown device e817
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at 48000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

_________________
Torfinn
Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 3 of 3
  [ 37 posts ] 
Go to page Previous  1, 2, 3


Board index KnoppMyth General

All times are UTC - 6 hours




Who is online

Users browsing this forum: Google [Bot] and 10 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu