View unanswered posts    View active topics

Board index KnoppMyth Hardware

All times are UTC - 6 hours





Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
Girkers
PostPosted: Sat Oct 22, 2005 4:48 am 
Offline
Joined: Tue Mar 22, 2005 9:18 pm
Posts: 1422
Location: Brisbane, Queensland, Australia
I have installed R5A22 from scratch and I don't get to watch TV as all I get is no signal lock and a black screen.

Here is my /etc/modules/;
Code:
# /etc/modules: kernel modules to load at boot time.
#
# This file should contain the names of kernel modules that are
# to be loaded at boot time, one per line.  Comments begin with
# a `#', and everything on the line after them are ignored.
BusLogic
tmscsim
usbcore
uhci_hcd
ohci_hcd
usb_storage
ieee1394
ohci1394
rtc
pcmcia_core
rsrc_nonstatic
yenta_socket
firmware_class
pcmcia
serial_core
8250
parport
parport_pc
agpgart
intel_agp
tpm
tpm_nsc
i2c_core
i2c_i801
videodev
tveeprom
btcx_risc
v4l2_common
i2c_algo_bit
video_buf
bttv
tuner
gameport
emu10k1_gp
mii
e100
soundcore
snd
snd_hwdep
snd_util_mem
snd_page_alloc
snd_timer
snd_pcm
snd_ac97_codec
snd_seq_device
snd_rawmidi
snd_emu10k1
snd_mixer_oss
af_packet
autofs4
skge
v4l1_compat
dvb_core
cx24110
bt878
dst
or51211
dst_ca
sp887x
mt352
nxt6000
dvb_bt8xx
evdev
ves1x93
stv0299
ves1820
tda1004x
mt312
saa7146
saa7146_vv
ttpci_eeprom
sp8870
stv0297
tda8083
l64781
dvb_ttpci
budget_core
s5h1420
budget
budget_ci
tda10021
budget_av
cx22700
dvb_ttusb_budget
ttusbdecfe
ttusb_dec
ipv6


When booting the computer here is what gets included in the MythBackend log:
Code:
2005-10-20 21:04:57.516 New DB connection, total: 2
2005-10-20 21:04:57.532 DVB#0 Using DVB card 0, with frontend DST DVB-T.
2005-10-20 21:04:57.541 New DB connection, total: 3
2005-10-20 21:04:57.556 DVBSignalMonitor(0)::constructor(1,Warning, can not measure Bit Error Rate): Operation not supported
2005-10-20 21:04:57.858 DVBSignalMonitor(0)::constructor(1,Warning, can not count Uncorrected Blocks): Operation not supported


When I try and watch TV I get this in the log:
Code:
2005-10-20 21:39:11.816 New DB connection, total: 2
2005-10-20 21:39:11.867 DVB#0 Using DVB card 0, with frontend DST DVB-T.
2005-10-20 21:39:11.988 New DB connection, total: 3
2005-10-20 21:39:11.997 DVB#0 WARNING - Your frequency setting (748) is out of range. (min/max:137000000/858000000)
2005-10-20 21:39:13.095 DVBSignalMonitor(0)::constructor(1,Warning, can not measure Bit Error Rate): Operation not supported
2005-10-20 21:39:13.105 DVBSignalMonitor(0)::constructor(1,Warning, can not count Uncorrected Blocks): Operation not supported
2005-10-20 21:39:16.146 TVRec: Timed out waiting for lock -- aborting recording
2005-10-20 21:39:17.575 New DB scheduler connection
2005-10-20 21:39:17.638 mythbackend version: 0.19.20050712-1 www.mythtv.org
2005-10-20 21:39:17.659 Enabled verbose msgs : important general
2005-10-20 21:39:17.773 AutoExpire: Found 1 recorders w/max rate of 138 MiB/min
2005-10-20 21:39:17.779 AutoExpire: space: 3.0 GB w/freq: 10 min
2005-10-20 21:39:21.048 Reschedule requested for id -1.
2005-10-20 21:39:22.234 Scheduled 0 items in 1.2 = 1.18 match + 0.01 place
2005-10-20 21:39:22.262 Seem to be woken up by USER


Where to go?

_________________
Girkers


Last edited by Girkers on Mon Nov 07, 2005 5:28 am, edited 1 time in total.
Top
 Profile  
 
jbman
 Post subject:
PostPosted: Sat Oct 22, 2005 7:27 am 
ok this is mine on my working system

Code:
stv0299
ves1820
tda1004x
mt312
saa7146
saa7146_vv
ttpci_eeprom
sp8870
stv0297
tda8083
l64781
dvb_ttpci
budget_core
s5h1420
budget
budget_ci
tda10021
budget_av
cx22700
dvb_ttusb_budget
ttusbdecfe
ttusb_dec
ipv6
Top
  
 
Girkers
 Post subject:
PostPosted: Tue Oct 25, 2005 6:03 pm 
Offline
Joined: Tue Mar 22, 2005 9:18 pm
Posts: 1422
Location: Brisbane, Queensland, Australia
This did not work for me, the backend would not start automatically and when I started it manually and the system could not connect to it still.

:cry:

_________________
Girkers
Top
 Profile  
 
jbman
 Post subject:
PostPosted: Tue Oct 25, 2005 6:30 pm 
what info are you getting on the screen on boot?

I know mine has something about locking onto the stations. I cant find which log its in to post here. will do if i find it.
Top
  
 
Girkers
 Post subject:
PostPosted: Tue Oct 25, 2005 8:09 pm 
Offline
Joined: Tue Mar 22, 2005 9:18 pm
Posts: 1422
Location: Brisbane, Queensland, Australia
I won't be able to try anything tonight, due to attending study.

I will get a chance tomorrow night, but what I found confusing was that the frontend could not talk to the backend and I could also not ssh into my box. Obviously my network card module is different to yours and this may be why it could not talk to the backend even though it is locally on the same machine.

Any other theories?

Also after booting with these modules should I go through the mythtv setup again?

_________________
Girkers
Top
 Profile  
 
jbman
 Post subject:
PostPosted: Tue Oct 25, 2005 9:07 pm 
you might even need to move around your modules to load in a different order. i know on one version of knoppmyth i had to move them around to get everything to work right.
Top
  
 
nigelpearson
 Post subject:
PostPosted: Wed Oct 26, 2005 6:32 am 
Offline
Joined: Wed Mar 03, 2004 7:43 pm
Posts: 748
Location: Sydney, Australia
Girkers, what happened when you scanned in mythtv-setup?

Did it find any channels? Had you tried deleting all the channels and re-scanning?

_________________
| Nigel Pearson, nigel.pearson.au@gmail.com
| "Things you own end up owning you" - Tyler, Fight Club
Top
 Profile  
 
Girkers
 Post subject:
PostPosted: Thu Oct 27, 2005 1:48 am 
Offline
Joined: Tue Mar 22, 2005 9:18 pm
Posts: 1422
Location: Brisbane, Queensland, Australia
Yeah it finds the channels, the funny thing is, it starts the signal and snr at 50% strength and goes from there. But obviously the 0 has moved to 50% as it stays there even when there is no signal.

I have tried scanning a number of ways, the fully automatic and importing a channel.conf, either way I get diddly squat when trying to watch tv.

_________________
Girkers
Top
 Profile  
 
Girkers
 Post subject:
PostPosted: Mon Nov 07, 2005 5:27 am 
Offline
Joined: Tue Mar 22, 2005 9:18 pm
Posts: 1422
Location: Brisbane, Queensland, Australia
Funnily enough I got the TV to work with a bit of help from a newbie called yaz.

He posted how to test your dvb card and whilst his command line was not entirely correct it lead me to test if the card worked outside of MythTV.

I had recently killed my installation so I had reinstalled A22 and had not done the TV setup. I did the test as in post http://mysettopbox.tv/phpBB2/viewtopic.php?t=6542 and created and test the channels.conf, all good.

Then in mythtv-setup I imported this conf file and set the channel to the funny channel number it gave me and it all worked fine. I haven't played with the channel guide or the channel numbers as it is currently working.

_________________
Girkers
Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 


Board index KnoppMyth Hardware

All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 22 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu