Has anyone else had this problem? I've got a PVR-350 and my fast forward and rewind buttons on my grey remote always worked perfectly with Knoppmyth up until I installed R5A22. Ever since that release those two buttons don't do anything anymore in MythTV or mplayer etc. I played with it a little at the time and ended up giving up and hoping it was just a quirk that would iron itself out in the next release. Well, I've installed R5B7 and fast forward and rewind still aren't working. I chose the grey remote during the installation process. I've tried swapping out my /etc/lircd.conf with this one:
http://lirc.sourceforge.net/remotes/hauppauge/lircd.conf.hauppauge but to no avail so I reverted back to the one the installation gave me. I've searched the forum but I haven't found anything that's worked so far.
Here is my current /etc/lircd.conf:
Code:
#
# this config file was automatically generated
# using lirc-0.5.5pre8 on Sun Apr 18 11:43:45 1999
#
# contributed by Jens Leuschner <leuschner@gmx.net>
#
# brand: Hauppauge
# model:
# supported devices: WinTV primo; WinTV pci; WinTV radio
#
# This config file will work with both homebrew receivers and
# original Hauppauge TV cards !!!
#
begin remote
name Hauppauge
bits 13
flags SHIFT_ENC
eps 30
aeps 100
one 950 830
zero 950 830
plead 960
gap 89584
repeat_bit 2
begin codes
TV 0x000000000000100F
RADIO 0x000000000000100C
FULL_SCREEN 0x000000000000102E
CH+ 0x0000000000001020
CH- 0x0000000000001021
VOL- 0x0000000000001011
VOL+ 0x0000000000001010
MUTE 0x000000000000100D
SOURCE 0x0000000000001022
1 0x0000000000001001
2 0x0000000000001002
3 0x0000000000001003
4 0x0000000000001004
5 0x0000000000001005
6 0x0000000000001006
7 0x0000000000001007
8 0x0000000000001008
9 0x0000000000001009
0 0x0000000000001000
RESERVED 0x000000000000101E
MINIMIZE 0x0000000000001026
end codes
end remote
#
#
# this config file was automatically generated
# using lirc-0.6.6(animax) on Tue Apr 15 19:50:27 2003
#
# contributed by
#
# brand: Hauppauge
# model no. of remote control:
# devices being controlled by this remote: PVR 2/350
#
begin remote
name hauppauge_pvr
bits 13
flags RC5|CONST_LENGTH
eps 30
aeps 100
one 969 811
zero 969 811
plead 1097
gap 114605
toggle_bit 2
begin codes
Power 0x00000000000017FD
Go 0x00000000000017FB
1 0x00000000000017C1
2 0x00000000000017C2
3 0x00000000000017C3
4 0x00000000000017C4
5 0x00000000000017C5
6 0x00000000000017C6
7 0x00000000000017C7
8 0x00000000000017C8
9 0x00000000000017C9
Back/Exit 0x00000000000017DF
0 0x00000000000017C0
Menu 0x00000000000017CD
Red 0x00000000000017CB
Green 0x00000000000017EE
Yellow 0x00000000000017F8
Blue 0x00000000000017E9
Ch+ 0x00000000000017E0
Ch- 0x00000000000017E1
Vol- 0x00000000000017D1
Vol+ 0x00000000000017D0
Ok 0x00000000000017E5
Mute 0x00000000000017CF
Blank 0x00000000000017CC
Full 0x00000000000017FC
Rewind 0x00000000000017F2
Play 0x00000000000017F5
Forward 0x00000000000017F4
Record 0x00000000000017F7
Stop 0x00000000000017F6
Pause 0x00000000000017F0
Replay 0x00000000000017E4
Skip 0x00000000000017DE
end codes
end remote
#
# this config file was automatically generated
# using lirc-0.7.0(any) on Sun Nov 28 20:25:09 2004
#
# contributed by
#
# brand: Hauppauge 350
# Created: G.J. Werler (The Netherlands)
# Project: Mythtv Fedora Pundit-R www.mythtvportal.com
# Date: 2004/11/28
# model no. of remote control: Hauppauge A415-HPG
# devices being controlled by this remote: PVR-350
#
begin remote
name Hauppauge_350
bits 13
flags RC5|CONST_LENGTH
eps 30
aeps 100
one 969 811
zero 969 811
plead 1097
gap 114605
toggle_bit 2
begin codes
Go 0x00000000000017BB
Power 0x00000000000017BD
TV 0x000000000000179C
Videos 0x0000000000001798
Music 0x0000000000001799
Pictures 0x000000000000179A
Guide 0x000000000000179B
Radio 0x000000000000178C
Up 0x0000000000001794
Left 0x0000000000001796
Right 0x0000000000001797
Down 0x0000000000001795
OK 0x00000000000017A5
Back/Exit 0x000000000000179F
Menu/i 0x000000000000178D
Vol+ 0x0000000000001790
Vol- 0x0000000000001791
Prev.Ch 0x0000000000001792
Mute 0x000000000000178F
Ch+ 0x00000000000017A0
Ch- 0x00000000000017A1
Record 0x00000000000017B7
Stop 0x00000000000017B6
Rewind 0x00000000000017B2
Play 0x00000000000017B5
Forward 0x00000000000017B4
Replay/SkipBackward 0x00000000000017A4
Pause 0x00000000000017B0
SkipForward 0x000000000000179E
1 0x0000000000001781
2 0x0000000000001782
3 0x0000000000001783
4 0x0000000000001784
5 0x0000000000001785
6 0x0000000000001786
7 0x0000000000001787
8 0x0000000000001788
9 0x0000000000001789
Asterix 0x000000000000178A
0 0x0000000000001780
# 0x000000000000178E
Red 0x000000000000178B
Green 0x00000000000017AE
Yellow 0x00000000000017B8
Blue 0x00000000000017A9
end codes
end remote
#
# this config file was automatically generated
# using lirc-0.7.0pre4(serial) on Sun Oct 2 00:24:32 2005
#
# contributed by anton|ganthaler.at and juergen.wilhelm|aon.at
# members of linux user group Vorarlberg www.lugv.at
#
# for ir remote controler from Hauppauge WinTV Nexus-S
# most of the keys are supported
#
# brand: Hauppauge
# model no. of remote control: WinTV Nexus-S
# devices being controlled by this remote:
#
begin remote
name Hauppauge_WinTV_Nexus-S
bits 13
flags RC5|CONST_LENGTH
eps 30
aeps 100
one 944 828
zero 944 828
plead 980
gap 113932
min_repeat 1
toggle_bit 2
begin codes
Up 0x0000000000001794
Down 0x0000000000001795
Left 0x0000000000001796
Right 0x0000000000001797
Power 0x00000000000017BD
Ok 0x00000000000017A5
Menu 0x000000000000178D
Back 0x000000000000179F
Red 0x000000000000178B
Green 0x00000000000017AE
Yellow 0x00000000000017B8
Blue 0x00000000000017A9
0 0x0000000000001780
1 0x0000000000001781
2 0x0000000000001782
3 0x0000000000001783
4 0x0000000000001784
5 0x0000000000001785
6 0x0000000000001786
7 0x0000000000001787
8 0x0000000000001788
9 0x0000000000001789
Play 0x00000000000017B5
Pause 0x00000000000017B0
Stop 0x00000000000017B6
Record 0x00000000000017B7
FastFwd 0x00000000000017B4
FastRwd 0x00000000000017B2
Channel+ 0x00000000000017A0
Channel- 0x00000000000017A1
Volume+ 0x0000000000001790
Volume- 0x0000000000001791
Mute 0x000000000000178F
Timers 0x000000000000178A
Recordings 0x000000000000178E
Back 0x000000000000179F
Record 0x00000000000017B7
Pause 0x00000000000017B0
end codes
end remote
and my /home/mythtv/.mythtv/lircrc
Code:
# lircrc.example.HauppaugeGrey-nativelirc
# 2003-09-17, Robert Kulagowski
# mailto:rkulagow@rocketmail.com
# Save this file in ~/.mythtv/lircrc
begin
prog = mythtv
button = Power
config = Esc
end
begin
prog = mythtv
button = Go
# Swap the PiP windows
config = N
end
begin
prog = mythtv
button = 1
config = 1
end
begin
prog = mythtv
button = 2
config = 2
end
begin
prog = mythtv
button = 3
config = 3
end
begin
prog = mythtv
button = 4
config = 4
end
begin
prog = mythtv
button = 5
config = 5
end
begin
prog = mythtv
button = 6
config = 6
end
begin
prog = mythtv
button = 7
config = 7
end
begin
prog = mythtv
button = 8
config = 8
end
begin
prog = mythtv
button = 9
config = 9
end
begin
prog = mythtv
button = Back/Exit
config = Esc
end
begin
prog = mythtv
button = 0
config = 0
end
begin
prog = mythtv
button = Menu
config = M
end
# Below are keys used with the Hauppauge Grey remote
begin
prog = mythtv
# This is the Red key
# We'll use it for "Delete"
button = Red
config = D
end
begin
prog = mythtv
# This is the Green key
# We'll use it for "Information"
button = Green
config = I
end
# Note the "repeat =" strings in the volume and channel.
# This means that if you hold down the key, every nth instance will be
# passed. This depends on your system, so you may want to increase or
# decrease this and see what happens. repeat = 1 is probably too
# fast.
begin
prog = mythtv
# This is the Yellow key
# Use it as a volume key
button = Yellow
repeat = 3
config = F10
end
begin
prog = mythtv
# This is the Blue key
# Use it as a volume key
button = Blue
repeat = 3
config = F11
end
begin
prog = mythtv
button = Ch+
# This is the "up" on the central diamond
repeat = 3
config = Up
end
begin
prog = mythtv
button = Ch-
# This is the "down" on the central diamond
repeat = 3
config = Down
end
begin
prog = mythtv
button = Vol-
# This is the "left" on the central diamond
repeat = 3
config = Left
end
begin
prog = mythtv
button = Vol+
# This is the "right" on the central diamond
repeat = 3
config = Right
end
begin
prog = mythtv
# Middle button on the diamond
button = Ok
config = Return
end
begin
prog = mythtv
button = Mute
config = F9
end
begin
prog = mythtv
# Change focus for PiP (to change channel in the other window)
button = Blank
config = B
end
begin
prog = mythtv
# Toggle PiP on/off
button = Full
config = V
end
begin
prog = mythtv
button = Rew
config = Left
end
begin
prog = mythtv
button = Play
config = P
end
begin
prog = mythtv
button = FFW
config = Right
end
begin
prog = mythtv
button = Record
config = R
end
begin
prog = mythtv
# Teletext
button = Stop
config = T
end
begin
prog = mythtv
button = pause
config = P
end
begin
prog = mythtv
button = Replay
# Use for backwards commercial skip
config = Q
end
begin
prog = mythtv
button = Skip
# Use for forward commercial skip
config = Z
end
#MPlayer
begin
prog = mplayer
button = Off
config = quit
end
begin
prog = mplayer
button = MENU
config = osd
end
begin
prog = mplayer
button = Rew
config = seek -10
repeat = 1
end
begin
prog = mplayer
button = FFW
config = seek +10
repeat = 1
end
begin
prog = mplayer
button = Replay
config = seek -60
repeat = 1
end
begin
prog = mplayer
button = Skip
config = seek +60
repeat = 1
end
begin
prog = mplayer
button = Pause
config = pause
end
begin
prog = mplayer
button = Play
config = pause
end
begin
prog = mplayer
button = BACK
config = quit
end
begin
prog = mplayer
button = VOL+
config = volume +1
repeat = 1
end
begin
prog = mplayer
button = VOL-
config = volume -1
repeat = 1
end
begin
prog=mplayer
button=Mute
config=mute
end
##XINE
begin
prog = xine
button = PLAY
repeat = 3
config = Play
end
begin
prog = xine
button = STOP
repeat = 3
config = Stop
end
begin
prog = xine
button = BACK/EXIT
config = Quit
end
begin
prog = xine
button = PAUSE
repeat = 3
config = Pause
end
begin
prog = xine
button = CH+
repeat = 4
config = EventUp
end
begin
prog = xine
button = CH-
repeat = 4
config = EventDown
end
begin
prog = xine
button = VOL-
repeat = 4
config = EventLeft
end
begin
prog = xine
button = VOL+
repeat = 4
config = EventRight
end
begin
prog = xine
button = OK
repeat = 0
config = EventSelect
end
begin
prog = xine
button = MENU
repeat = 0
config = Menu
end
#vol down
begin
prog = xine
button = YELLOW
repeat = 1
config = Volume-
end
#vol up
begin
prog = xine
button = Red
repeat = 1
config = Volume+
end
begin
prog = xine
button = FFW
repeat = 2
config = SeekRelative+30
end
begin
prog = xine
button = REW
repeat = 2
config = SeekRelative-30
end
#ch up
begin
prog = xine
button = Green
repeat = 1
config = SeekRelative+60
end
#ch down
begin
prog = xine
button = Blue
repeat = 1
config = SeekRelative-60
end
#sleep
begin
prog = xine
button = GO
repeat = 1
config = ZoomIn
end
#display
begin
prog = xine
button = SKIP
repeat = 1
config = ZoomOut
end
#skip chapter forward
begin
prog = xine
button = SKIP
repeat = 1
config = EventNext
end
#skip chapter backward
begin
prog = xine
button = REPLAY
repeat = 1
config = EventPrior
end
begin
prog = lircnav
button = VOL-
config = page_down
end
begin
prog = lircnav
button = VOL+
config = page_up
end
begin
prog = lircnav
button = CH+
config = up
end
begin
prog = lircnav
button = CH-
config = down
end
begin
prog = lircnav
button = OK
config = select
end
begin
prog = lircnav
button = Off
config = quit
end
Any help greatly appreciated. I've been without fast forward and rewind for six months
Chris
View unanswered posts
View active topics
KnoppMyth 
Print view
Previous topic Next topic 
LinHES Home
Board index
FAQ
Search
Login 
Register
