how do you map keys with the newest build? its autodetecting and i can get basic functions but how do i set buttons to keyboard keys (where is the map file default held)

i read most of the stuff in here but its all old

Are you using LIRC or the kernel module? It is by far easier to remap keys with LIRC than the kernel module.

_________________
cesman

When the source is open, the possibilities are endless!

I'm using an ATI Remote Wonder on R5B7, and the default install had it set up using lirc. I've re-mapped some keys by editing /home/mythtv/.mythtv/lircrc (after making a backup of that file, or course). You can get an idea of what lirc calls each button by taking a look at /etc/lirc/lircd.conf.

(edited for clarity)

Allan

_________________
Running Knoppmyth R5F27 since 09/12/07

Hardware Specs

i am using the kernel mod. if its a pain i will switch over to lirc and use the files adoute pointed out.

You can equate [i]by far easier[/] to a pain, as you have to modify the source for the module and recompile the module. Not a easy task for the faint of heart. You'll also find you'll need to do this as I release newer versions with newer kernels. Backup and auto upgrade will retain your lircrc.

_________________
cesman

When the source is open, the possibilities are endless!