View unanswered posts    View active topics

Board index KnoppMyth Hardware

All times are UTC - 6 hours





Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
brandor
PostPosted: Wed May 03, 2006 1:50 pm 
Offline
Joined: Wed May 03, 2006 11:08 am
Posts: 4
Hey all,

I've been playing with knoppmyth for a couple days now. I've got a Hauppauge PVR-150 MCE edition with remote and can't get the card to work properly.

When I click watch TV, I get a black screen for about 30 seconds and it pops back to the menu. Also, when I run
Code:
mplayer /dev/video0
I just see static.

***EDIT***
After adding /etc/modprobe.d/ivtv with:

options ivtv tuner=50,2

in it, I can now see and hear TV with the mplayer command above. But still get the blank screen with MythTV.

Here is my ***NEW*** sed output:

Code:
May  3 16:08:30 mythtv kernel: ivtv:  ==================== START INIT IVTV ====================
May  3 16:08:30 mythtv kernel: ivtv:  version 0.4.3 (tagged release) loading
May  3 16:08:30 mythtv kernel: ivtv:  Linux version: 2.6.15-chw-2 SMP preempt 586 gcc-3.3
May  3 16:08:30 mythtv kernel: ivtv:  In case of problems please include the debug info between
May  3 16:08:30 mythtv kernel: ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
May  3 16:08:30 mythtv kernel: ivtv:  any module options, when mailing the ivtv-users mailinglist.
May  3 16:08:30 mythtv kernel: ivtv0: Autodetected WinTV PVR 150 card (cx23416 based)
May  3 16:08:30 mythtv kernel: ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 20
May  3 16:08:30 mythtv kernel: ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
May  3 16:08:30 mythtv kernel: ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
May  3 16:08:30 mythtv kernel: tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
May  3 16:08:30 mythtv kernel: ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
May  3 16:08:30 mythtv kernel: cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
May  3 16:08:34 mythtv kernel: cx25840 1-0044: loaded v4l-cx25840.fw firmware (14264 bytes)
May  3 16:08:34 mythtv kernel: ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
May  3 16:08:34 mythtv kernel: wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
May  3 16:08:34 mythtv kernel: ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
May  3 16:08:34 mythtv kernel: tveeprom 1-0050: Hauppauge model 26582, rev F0B2, serial# 9443379
May  3 16:08:34 mythtv kernel: tveeprom 1-0050: tuner model is TCL M2523_5N_E (idx 112, type 4)
May  3 16:08:34 mythtv kernel: tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
May  3 16:08:34 mythtv kernel: tveeprom 1-0050: audio processor is CX25843 (idx 37)
May  3 16:08:34 mythtv kernel: tveeprom 1-0050: decoder processor is CX25843 (idx 30)
May  3 16:08:34 mythtv kernel: tveeprom 1-0050: has no radio, has no IR remote
May  3 16:08:35 mythtv kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
May  3 16:08:35 mythtv kernel: ivtv0: Encoder revision: 0x02050032
May  3 16:08:35 mythtv kernel: ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
May  3 16:08:35 mythtv kernel: ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
May  3 16:08:35 mythtv kernel: ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
May  3 16:08:35 mythtv kernel: ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
May  3 16:08:35 mythtv kernel: tuner 1-0061: type set to 50 (TCL 2002N)
May  3 16:08:35 mythtv kernel: ivtv0: Initialized WinTV PVR 150, card #0
May  3 16:08:35 mythtv kernel: ivtv:  ====================  END INIT IVTV  ====================


Thanks for the help in advance.
Top
 Profile  
 
cesman
 Post subject:
PostPosted: Wed May 03, 2006 6:34 pm 
Offline
Joined: Fri Sep 19, 2003 7:05 pm
Posts: 5088
Location: Fontana, Ca
And the MythTV logs state?

_________________
cesman

When the source is open, the possibilities are endless!
Top
 Profile  
 
tjc
 Post subject:
PostPosted: Wed May 03, 2006 7:57 pm 
Offline
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location: Arlington, MA
Have you tried upgrading to ivtv 0.4.4 as per the wiki? For how to get the logs Cecil requested see this wiki page - http://www.knoppmythwiki.org/index.php?page=CheckingLogFiles
Top
 Profile  
 
brandor
 Post subject:
PostPosted: Thu May 04, 2006 6:24 am 
Offline
Joined: Wed May 03, 2006 11:08 am
Posts: 4
Quote:
And the MythTV logs state?


Code:
2006-05-04 08:22:13.524 MainServer::HandleAnnounce Playback
2006-05-04 08:22:13.527 adding: mythtv as a client (events: 0)
2006-05-04 08:22:13.537 TVRec(1): Changing from None to WatchingLiveTV
2006-05-04 08:22:13.820 NVR: Won't work with the streaming interface, falling back
VIDIOCGMBUF:: Invalid argument
2006-05-04 08:22:14.490 NVR(/dev/video0) Error: Reading VBI data
                        eno: Resource temporarily unavailable (11)
2006-05-04 08:22:34.334 TVRec(1): Changing from WatchingLiveTV to None
2006-05-04 08:22:34.346 Finished recording Paid Programming: channel 1019


Quote:
Have you tried upgrading to ivtv 0.4.4 as per the wiki?


If I can watch TV using mplayer, doesn't that mean the ivtv driver is working properly?
Top
 Profile  
 
brandor
 Post subject:
PostPosted: Fri May 05, 2006 6:52 am 
Offline
Joined: Wed May 03, 2006 11:08 am
Posts: 4
I've found my problem. I was an idiot and had the wrong device selected during setup. Once I changed it to the PVR-X50 device, everything started working properly.

Apologies for the trouble.
Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 


Board index KnoppMyth Hardware

All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 26 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu