| Author |
Message |
|
neutron68
|
 Posted: Thu Jun 01, 2006 3:15 pm |
|
|
Joined: Tue Mar 28, 2006 8:26 pm
Posts: 804
Location:
Minneapolis, MN
|
|
Has anyone got the DVI port to work on the Asus A8N-VM CSM motherboard?
I've got the VGA port working - outputting 1080i HDTV, no less! But, I don't know how to turn on the DVI port.
I built a Mythtv box for a friend. He has a DLP projector and would like to use the DVI output on the motherboard to drive it.
Eric
_________________
KnoppMyth R5.5, Asus A8N-VM CSM (nvidia 6150 onboard video), AMD Athlon 64 dual-core 4200+, two 1GB sticks DDR 400, HD-3000 HDTV card, PVR-150 card, Iguanaworks RS-232 IR receiver/transmitter, Pioneer DVR-110 DVD burner
Last edited by neutron68 on Sat Jun 24, 2006 10:57 am, edited 1 time in total.
|
|
| Top |
|
 |
|
finger51
|
Posted: Thu Jun 01, 2006 4:25 pm |
|
|
Joined: Tue Mar 22, 2005 11:56 am
Posts: 110
Location:
San Francisco
|
In the exact same boat you're in.
install goes fine, since the netcardconfig hasn't been run yet it can't resolve nvidia.com - X fails to load with
(7174 default driver)
Code: Screen(s) Found, but none have usable configuration
Fatal server error:
No Screens Found
running netcardconfig sets up network no problem, I install-nvidia.sh 1.0-8178 -force and it seems to go ok, reboot then blank screen.
I've tried loading my old XF86Config-4 which worked for my a7n8x-vm but I still get the blank screen. grrrr
I'll post if I make any headway.
_________________
R5F27 | M2NPV-VM | 4600+ 65W AM2X2 | CORSAIR TWIN2X1024A-6400 | 2x HD-5000 |
DVI to HP LC3700N
|
|
| Top |
|
|
|
finger51
|
Posted: Thu Jun 01, 2006 6:41 pm |
|
|
Joined: Tue Mar 22, 2005 11:56 am
Posts: 110
Location:
San Francisco
|
Found the answer over at nvnews.net
add this line to your screens section in XF86Config-4
Code: Option "ConnectedMonitor" "DFP"
and here is my complete XF86Config-4: (wasn't able to get my 1368x768 modeline going, but at least I have X now) Code: Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
# PS/2 Mouse using /dev/input/mice in Kernel 2.6
# Serial Mouse not detected
InputDevice "USB Mouse" "CorePointer"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
# FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/CID"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
# Load "GLcore"
Load "dbe"
# Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "speedo"
Load "type1"
Load "freetype"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# Auto-generated by KNOPPIX mkxf86config
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
Option "IgnoreEDID" "True"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
# Additional modelines
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
Modeline "1368x768" 85.86 1368 1440 1584 1800 768 769 772 795 -hsync -vsync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
# 1920x1200 @ 60.00 Hz (GTF) hsync: 74.52; pclk: 193.16 MHz
Modeline "1920x1200" 193.16 1920 2048 2256 2592 1200 1201 1204 1242 -HSync +HSync
EndSection
Section "Device"
### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
#Option "sw_cursor"
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
Identifier "Card0"
# The following line is auto-generated by KNOPPIX mkxf86config
Driver "nvidia"
VendorName "All"
BoardName "All"
BusID "PCI:0:5:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
Option "ConnectedMonitor" "DFP"
SubSection "Display"
Depth 1
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1368x768" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1368x768" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
hope this helps!
_________________
R5F27 | M2NPV-VM | 4600+ 65W AM2X2 | CORSAIR TWIN2X1024A-6400 | 2x HD-5000 |
DVI to HP LC3700N
|
|
| Top |
|
|
|
neutron68
|
Posted: Thu Jun 01, 2006 9:02 pm |
|
|
Joined: Tue Mar 28, 2006 8:26 pm
Posts: 804
Location:
Minneapolis, MN
|
Hi, Thanks for your response.
So, all I need to do is add the following to my Config-4 file in order to turn on the DVI output:
Code: Option "ConnectedMonitor" "DFP"
I'll try it! Can it be that simple??
The other part of your message you were talking about getting nvidia drivers to work. I got them working so that issue is solved.
How?
I had to learn how to deal with the initial x-windows crash when the nvidia driver that KnoppMyth has as default, fails. In my case, when the install crashes with the non-functional nvidia 7174 driver, I open a shell window and type 'dhclinet' for a quick and easy DHCP IP connection. Then I use WGET to go get the newest 'pkg1.run' driver package from nvidia. (You'll find that the KnoppMyth script 'usr/local/bin/install-nvidia-debian.sh' is already outdated and crashes with any nvidia driver of version 1.0-8756 or newer.)
Once the pkg1.run file is on your hard drive you just type
"sh NVIDIA-Linux-x86-1.0-????-pkg1.run" to install the new driver.
Eric
_________________
KnoppMyth R5.5, Asus A8N-VM CSM (nvidia 6150 onboard video), AMD Athlon 64 dual-core 4200+, two 1GB sticks DDR 400, HD-3000 HDTV card, PVR-150 card, Iguanaworks RS-232 IR receiver/transmitter, Pioneer DVR-110 DVD burner
Last edited by neutron68 on Fri Jun 02, 2006 7:53 am, edited 1 time in total.
|
|
| Top |
|
|
|
finger51
|
Posted: Thu Jun 01, 2006 11:43 pm |
|
|
Joined: Tue Mar 22, 2005 11:56 am
Posts: 110
Location:
San Francisco
|
|
THis is pretty funny. we're at basically the same stage with the install.
anyway, yeah- I saw that line for ConnectedMonitor at nvnews and was pretty happy with it.
I'm SSH'd into the machine here in the livingroom- as soon as I gave the '/etc/init.d/gdm restart' command I got the X desktop with the shell askinng me for the root password.
I still haven't figured out why I can't get my 1368x768 modeline working.. oh well, it's all about the noodling.
The wife is convinced I like tweaking on this machine more than I actually like watching TV..
_________________
R5F27 | M2NPV-VM | 4600+ 65W AM2X2 | CORSAIR TWIN2X1024A-6400 | 2x HD-5000 |
DVI to HP LC3700N
|
|
| Top |
|
|
|
neutron68
|
Posted: Fri Jun 02, 2006 8:34 am |
|
|
Joined: Tue Mar 28, 2006 8:26 pm
Posts: 804
Location:
Minneapolis, MN
|
So, what resolutions are you able to get working from the DVI port? Just the basic computer resolutions (1024x768, etc.)?
I went to this page and tried both of their 1080i modelines on my friends Mitsubishi projector. Both worked.
http://www.linuxis.us/linux/media/howto ... ation.html
I don't see the resolution you want listed there. Is that a custom resolution for a projector you have?
To date, I've only run my Mythtv system on a 1024x768 LCD monitor. My next step is the 1080i output from the VGA connector to a Sony 1270Q projector.
Did you discover that you needed ALSA drivers 1.0.11 to get your onboard audio to quit squeeling? I did that sound update enough times that I finally wrote a script to do it for me. (I posted it in one of these forums).
Eric
_________________
KnoppMyth R5.5, Asus A8N-VM CSM (nvidia 6150 onboard video), AMD Athlon 64 dual-core 4200+, two 1GB sticks DDR 400, HD-3000 HDTV card, PVR-150 card, Iguanaworks RS-232 IR receiver/transmitter, Pioneer DVR-110 DVD burner
|
|
| Top |
|
|
|
finger51
|
Posted: Fri Jun 02, 2006 11:54 am |
|
|
Joined: Tue Mar 22, 2005 11:56 am
Posts: 110
Location:
San Francisco
|
neutron68 wrote: So, what resolutions are you able to get working from the DVI port? Just the basic computer resolutions (1024x768, etc.)? I was able to get the 1368x786 modeline to work by deleting the other modes from the screen section. my XF86Config-4 "Screen" section looks like this now: Code: Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
Option "ConnectedMonitor" "DFP"
SubSection "Display"
Depth 24
Modes "1368x768" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1368x768" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
neutron68 wrote: I don't see the resolution you want listed there. Is that a custom resolution for a projector you have? No, I'm using an HP LC3700 LCD panel native resolution is 136 6x768 so my modeline is Code: Modeline "1368x768" 85.86 1368 1440 1584 1800 768 769 772 795 -hsync -vsync
I had the 'multiples of 8' problem, so I figure I could live with 2 lines 'over' on the sides sacrificed to overscan rather than being 6 short. It looks pretty darn good at 'dot for dot' matching that the monitor is set to. The panel is a rebadged sharp aquos  neutron68 wrote: To date, I've only run my Mythtv system on a 1024x768 LCD monitor. My next step is the 1080i output from the VGA connector to a Sony 1270Q projector. Nice! Have you seen any of the widescreen themes? I'm using ProjectGrayhem-wide and it looks fantastic! the black color scheme works really well with my monitor which has a polished black bezel. you should try it when you get 1080i going neutron68 wrote: Did you discover that you needed ALSA drivers 1.0.11 to get your onboard audio to quit squeeling? I did that sound update enough times that I finally wrote a script to do it for me. (I posted it in one of these forums).
I did indeed, in fact I used your script last night, Thanks for putting it up there.
so far, everything is working. total number of hours to get the a8n-vm csm on it's feet was about 4. I'd still class it as a tier 2.75 since the bios needed to be flashed and all of the extra driver updates. most of the time was spent trying to figure out the 'ConnectedMonitor" issue.
Best of luck to you with your KM'ing!
~fing
_________________
R5F27 | M2NPV-VM | 4600+ 65W AM2X2 | CORSAIR TWIN2X1024A-6400 | 2x HD-5000 |
DVI to HP LC3700N
|
|
| Top |
|
|
|
neutron68
|
Posted: Fri Jun 02, 2006 8:54 pm |
|
|
Joined: Tue Mar 28, 2006 8:26 pm
Posts: 804
Location:
Minneapolis, MN
|
I tried the DVI-edit. I added only the Option "ConnectedMonitor" "DFP" line to the Config-4 rile, stopped gdm, restarted gdm and there was no video out the VGA port or the DVI port after that. 
So, I commented out that line and restarted everything - back to functionality again.
What is that section at the end of your Config-4 file do? Is that part of the DVI turn-on?
Code: Section "DRI"
Mode 0666
EndSection
When you turn on the DVI port, does the motherboard send video out both the VGA port (analog) and DVI (digital) at the same time?
All modelines I've seen posted on the web have 24 bit as their default setting. What happens when you make 32 bit the default setting? Mushroom cloud?? 
Thus far I've left the screen brand and model identifiers in the Config-4 file at their defaults. I see you have too. I guess they must not matter to the machine?
Thus far, I've been using the pre-loaded Myth themes only. I don't know how to load 3rd party themes yet.
Eric
_________________
KnoppMyth R5.5, Asus A8N-VM CSM (nvidia 6150 onboard video), AMD Athlon 64 dual-core 4200+, two 1GB sticks DDR 400, HD-3000 HDTV card, PVR-150 card, Iguanaworks RS-232 IR receiver/transmitter, Pioneer DVR-110 DVD burner
|
|
| Top |
|
|
|
finger51
|
Posted: Sat Jun 03, 2006 10:19 am |
|
|
Joined: Tue Mar 22, 2005 11:56 am
Posts: 110
Location:
San Francisco
|
neutron68 wrote: I tried the DVI-edit. I added only the Option "ConnectedMonitor" "DFP" line to the Config-4 rile, stopped gdm, restarted gdm and there was no video out the VGA port or the DVI port after that. So, I commented out that line and restarted everything - back to functionality again. hmmm.. one question- is your output currently going to a VGA/CRT or is it going to the friend's DLP? That would be why "ConnectedMonitor" didn't work for you. "DFP" is Digital Flat Panel a.k.a. LCD- I don't have any DLP experience so ??.. The only thing I might suggest is adding the "IgnoreEDID" "TRUE" ?? (note placement in my config) the DLP may be sending BS info and your video driver is handling it wrong? regardless, you should post your XF86Config-4 for all to have a looky. neutron68 wrote: What is that section at the end of your Config-4 file do? Is that part of the DVI turn-on?
Code: Section "DRI"
Mode 0666
EndSection
no, I think this section has to do with direct rendering access permissions. neutron68 wrote: When you turn on the DVI port, does the motherboard send video out both the VGA port (analog) and DVI (digital) at the same time?
I have never tested this- Once of the big reasons I bought this panel was because it had the DVI built in. neutron68 wrote: All modelines I've seen posted on the web have 24 bit as their default setting. What happens when you make 32 bit the default setting? Mushroom cloud?? LOL, again, hadn't tried- probably wouldn't do anything. I bet if I put the 32 bit code in front of the 24 it would just ignore it and go straight to the 24. If the 24 bit code wasn't there it probably would not display anything? Not sure. I could probably delete the 32 bit code- I doubt it would be used. Alot of my XF86Config-4 file is what was put there in the install, including that DRI code. neutron68 wrote: Thus far, I've been using the pre-loaded Myth themes only. I don't know how to load 3rd party themes yet.
It's very simple, just untar/unzip the theme to your '/usr/share/mythtv/themes' dir- that's it. it'll show up under setup\appearence
_________________
R5F27 | M2NPV-VM | 4600+ 65W AM2X2 | CORSAIR TWIN2X1024A-6400 | 2x HD-5000 |
DVI to HP LC3700N
|
|
| Top |
|
|
|
neutron68
|
Posted: Sat Jun 03, 2006 12:50 pm |
|
|
Joined: Tue Mar 28, 2006 8:26 pm
Posts: 804
Location:
Minneapolis, MN
|
The current (working) output is 1080i HDTV via the motherboard's VGA connector to my friend's Mitsubishi DLP projector. Ideally, we'd like to turn on the DVI port and send digital video.
This page says that DFP is the option that will address the DVI port.
http://www.sorgonet.com/linux/nv-online/help.html
There is no DLP listed.
CRT is to address the VGA port.
The /etc/X11/XF86Config-4 file I've been experimenting with is on my friend's machine. I don't think I can copy the whole file to this forum via SSH (Putty), can I? I can only copy and paste one Putty screen at a time.
I started with the default KnoppMyth Config-4 file and have added modelines and Option lines.
It has the Option "DMPS" "true" in the Monitor section.
I added the Option "Connected Monitor" "DFP" under the Screen section - and then commented it out after it didn't work to turn on the DVI port.
I added the Option "Ignore EDID" "true" in there under the Screen section.
Code: Section "Monitor"
# Warning: This may fry old Monitors
# Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT defa$
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Moni$
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11$
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
Identifier "Monitor0"
HorizSync 28.0 - 96.0
VertRefresh 50.0 - 75.0
-skip a ways-
ModeLine "1600x1200" 280.6 1600 1728 1904 2208 1200 1201 1204 1271 -h$
ModeLine "1920x1200" 193.2 1920 2048 2256 2592 1200 1201 1204 1242 +h$
ModeLine "ATSC-720-59.94p" 74.176 1280 1320 1376 1650 720 722 728 750$
ModeLine "ATSC-720-60p" 74.25 1280 1320 1376 1650 720 722 728 750 -hs$
ModeLine "ATSC-1080-59.94i" 74.176 1920 1960 2016 2200 1080 1082 1088$
ModeLine "ATSC-1080-60i" 74.25 1920 1960 2016 2200 1080 1082 1088 112$
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
EndSection
Code: Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
# Option "ConnectedMonitor" "DFP"
Option "IgnoreEDID" "true"
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "ATSC-1080-60i" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "ATSC-1080-60i" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
I'm not sure what that DPMS line does and I also wonder why there is a 15 bit color depth in there.
Again, this file is the KnoppMyth default Config-4 with only a few lines added by me.
Eric
_________________
KnoppMyth R5.5, Asus A8N-VM CSM (nvidia 6150 onboard video), AMD Athlon 64 dual-core 4200+, two 1GB sticks DDR 400, HD-3000 HDTV card, PVR-150 card, Iguanaworks RS-232 IR receiver/transmitter, Pioneer DVR-110 DVD burner
|
|
| Top |
|
|
|
finger51
|
Posted: Tue Jun 06, 2006 10:58 am |
|
|
Joined: Tue Mar 22, 2005 11:56 am
Posts: 110
Location:
San Francisco
|
neutron68 wrote: The current (working) output is 1080i HDTV via the motherboard's VGA connector to my friend's Mitsubishi DLP projector. Ideally, we'd like to turn on the DVI port and send digital video.
Eric
man, I'm stumped at this point.. have you checked over at avsforum.com? they have been my fallback when I can't find info here. I've also had some luck at nvnews.net
_________________
R5F27 | M2NPV-VM | 4600+ 65W AM2X2 | CORSAIR TWIN2X1024A-6400 | 2x HD-5000 |
DVI to HP LC3700N
|
|
| Top |
|
|
|
nigelpearson
|
Posted: Tue Jun 06, 2006 7:23 pm |
|
|
Joined: Wed Mar 03, 2004 7:43 pm
Posts: 748
Location:
Sydney, Australia
|
http://download.nvidia.com/XFree86/Linu ... dix-d.html mentions some useful settings.
ConnectedMonitor is a list of what ports to drive. If your card supports TwinView, you should be able to set Option "ConnectedMonitor" "CRT, DFP" and have it drive both. This is what I got working last night: Code: Driver "nvidia"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "TwinView"
Option "TwinViewOrientation" "Clone"
Option "MetaModes" "1280x720,1280x720"
Option "NoTwinViewXineramaInfo" "true"
Option "ConnectedMonitor" "CRT, DFP"
...
Section "Screen"
...
DefaultColorDepth 24
SubSection "Display"
Depth 24
Modes "1280x720" "1280x768" "1024x768" "800x600" "640x480"
Virtual 1280 720 You could get away with less stuff in there, but I had devices of two different resolutions, so I had to force some settings.
Finger, I have no idea why "ConnectedMonitor" "DFP" didn't work for you. Were there any errors in /var/log/XFree86.log ?
_________________ | Nigel Pearson, nigel.pearson.au@gmail.com| "Things you own end up owning you" - Tyler, Fight Club
Last edited by nigelpearson on Wed Jun 07, 2006 4:46 pm, edited 4 times in total.
|
|
| Top |
|
|
|
cesman
|
Posted: Tue Jun 06, 2006 11:28 pm |
|
|
Joined: Fri Sep 19, 2003 7:05 pm
Posts: 5088
Location:
Fontana, Ca
|
Code: install-nvidia-debian.sh 1.0-8178 -force
_________________
cesman
When the source is open, the possibilities are endless!
|
|
| Top |
|
|
|
neutron68
|
Posted: Wed Jun 07, 2006 10:37 am |
|
|
Joined: Tue Mar 28, 2006 8:26 pm
Posts: 804
Location:
Minneapolis, MN
|
cesman wrote: Code: install-nvidia-debian.sh 1.0-8178 -force Hi Cesman!
What are you trying to tell us with the nvidia script call?
It doesn't relate to DVI output and modelines, does it?
nvidia 8178 is now an outdated driver with broken XvMC. I wouldn't use it.
Also, that script doesn't work for any nvidia driver newer than 8178. It downloads the nvidia file, but crashes before the new nvidia driver can be installed - even if you use the force switch.
Nvidia now has their own installer you download that installs and configures the driver for you.
Use WGET to fetch the pkg1.run file. When it is on your hard drive you just type:
"sh NVIDIA-Linux-x86-1.0-xxxx-pkg1.run" to install the new driver.
Eric
_________________
KnoppMyth R5.5, Asus A8N-VM CSM (nvidia 6150 onboard video), AMD Athlon 64 dual-core 4200+, two 1GB sticks DDR 400, HD-3000 HDTV card, PVR-150 card, Iguanaworks RS-232 IR receiver/transmitter, Pioneer DVR-110 DVD burner
|
|
| Top |
|
|
|
neutron68
|
Posted: Fri Jun 09, 2006 9:52 am |
|
|
Joined: Tue Mar 28, 2006 8:26 pm
Posts: 804
Location:
Minneapolis, MN
|
|
Finger51: You said you are using the DVI port for output. Are you using a DVI to VGA adapter or are you using a dedicated DVI cable with DVI connectors on both ends? I've heard that a DVI to VGA adapter is really only passing the analog VGA singals through the DVI connector in that configuration.
I retried the DFP option line last night. It did not give the Mitsubishi DLP projector a signal on the DVI port. At the same time, that DFP option line stopped the output to the VGA connector.
(I note that Finger51 has his "DFP option" line down in the SCREEN section and Nigel has his up in MONITOR section. Linux doesn't care where they are in the file?)
Then, I added the dual monitor option lines that were mentioned above. They did turn on the VGA port output, but the DVI still had no signal.
With the projector connected to the DVI port on the motherboard,
I looked in the XFree86 log and the CRT0 port shows the Samsung CRT monitor connected to it, but the DFP0 port shows nothing connected to it.
If I plug the Mitsubishi projector into the VGA connector, the XFree86 log shows a Mitsubishi 3000 projector connected to CRT0.
So, I believe this shows that the Mitsubishi projector communicates with the graphics chip ok. If the DVI port were alive, the Mitsubishi projector would give some feedback to the DFP0 port and it would show that in the XFree86 file.
Eric
_________________
KnoppMyth R5.5, Asus A8N-VM CSM (nvidia 6150 onboard video), AMD Athlon 64 dual-core 4200+, two 1GB sticks DDR 400, HD-3000 HDTV card, PVR-150 card, Iguanaworks RS-232 IR receiver/transmitter, Pioneer DVR-110 DVD burner
|
|
| Top |
|
|
View unanswered posts
View active topics
KnoppMyth 
Print view
Previous topic Next topic 
LinHES Home
Board index
FAQ
Search
Login 
Register