Dear Reader,

I have an aopen ea65 II barebone with an aopen winfast 2000XP EXPERT card. (Leadtek).

Normaly these cards have 107d:6611 or 107d:6613 pci string (Leadtek).
Aopen has put their own pci string in de TV-card: a0a0:6f05

I already add this pci string to the cx88-cards.c file.

What must i do to get the system to recongnize these changes?
I'm a bit unfamiliar with compiling and installing drivers.

Best regards,

MarcelS

rmmod cx8800
rmmod cx88xx
modprobe cx88xx i2c_scan=1 card=5 tuner=63 && modprobe cx8800


tail /var/log/messages

Jul 4 21:38:25 mythtv kernel: cx2388x v4l2 driver version 0.0.5 loaded
Jul 4 21:38:25 mythtv kernel: ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 18 (level, low) -> IRQ 16
Jul 4 21:38:25 mythtv kernel: CORE cx88[0]: subsystem: a0a0:6f05, board: Leadtek Winfast 2000XP Expert [card=5,insmod option]
Jul 4 21:38:25 mythtv kernel: TV tuner 63 at 0x1fe, Radio tuner -1 at 0x1fe
Jul 4 21:38:25 mythtv kernel: tuner 1-0060: All bytes are equal. It is not a TEA5767
Jul 4 21:38:25 mythtv kernel: tuner 1-0060: chip found @ 0xc0 (cx88[0])
Jul 4 21:38:25 mythtv kernel: tuner 1-0060: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
Jul 4 21:38:25 mythtv kernel: cx88[0]: i2c scan: found device @ 0x86 [tda9887/cx22702]
Jul 4 21:38:25 mythtv kernel: cx88[0]: i2c scan: found device @ 0xa0 [eeprom]
Jul 4 21:38:25 mythtv kernel: cx88[0]: i2c scan: found device @ 0xc0 [tuner (analog)]
Jul 4 21:38:26 mythtv kernel: cx88[0]: Leadtek eeprom invalid.
Jul 4 21:38:26 mythtv kernel: input: cx88 IR (Leadtek Winfast 2000XP as /class/input/input3
Jul 4 21:38:26 mythtv kernel: cx88[0]/0: found at 0000:02:04.0, rev: 5, irq: 16, latency: 32, mmio: 0xfa000000
Jul 4 21:38:26 mythtv kernel: tda9887 1-0043: chip found @ 0x86 (cx88[0])
Jul 4 21:38:26 mythtv kernel: cx88[0]/0: registered device video0 [v4l2]
Jul 4 21:38:26 mythtv kernel: cx88[0]/0: registered device vbi0
Jul 4 21:38:26 mythtv kernel: cx88[0]/0: registered device radio0

Now the LR6611 (Leadtek winfast 2000XP EXPERT REV.5) works.
I have a tv, radio and a caption device.

But after a reboot it shows card=0 (Unknown) in /var/log/messages again.

Does someone know how to make this permanent, so that after a reboot the same settings are made?


Best Regards

MarcelS

Agian i got a step in the right direction:

I have editted cx88-cards.c and added and changed de following:

Added:vendorid = 0xa0a0, deviceid = 0x6f05 for winfast 2000XP expert.
I changed the tuner setting for the winfast 2000XP expert card to TUNER_PHILIPS_FM1216ME_MK3 (his is the demodulator on my card)

Run:
/usr/src/kernel-version/make <enter>

Now a new cx88xx.ko cx8800.ko are generated.
copy these to the working directory and reboot the computer.
The TV card now loads automaticaly.

Up to the next problem, color depth

Best regards Marcel

Perhaps feeding your change back to the v4l-dvb folks, so others don't have the same issue. Share and share alike.

_________________
cesman

When the source is open, the possibilities are endless!

Hello,

Is there a some kind of procedure when giving a feedback, like in what format, and where exactly can send this feedback?

Best Regards,

Marcels

I don't know... I'd suggest going to linuxtv.org and see what you can find.

_________________
cesman

When the source is open, the possibilities are endless!