View unanswered posts    View active topics

Board index KnoppMyth General

All times are UTC - 6 hours





Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
mike7775
PostPosted: Wed Aug 02, 2006 3:56 pm 
Offline
Joined: Sun Jul 30, 2006 3:18 am
Posts: 3
My system is:
ASUS a7v (motherboard)
AMD Athlon 900 (cpu)
Nvidia Gforce 2 mx (video card)
STB, Gateway P/N 6000699 (bt848 tuner card aka card=3)

I've been try to get this to work for 4 days now...

My problem is when i press watch tv it show up with a black screen and i get this error in the log
Code:
bttv0: reset, reinitialize
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: timeout: drop=0 irq=0/0, risc=0c31203c, bits: VSYNC HSYNC OFLOW VPRES RIS
CIbttv0: reset, reinitialize
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: timeout: drop=0 irq=0/0, risc=0c31203c, bits: VSYNC HSYNC OFLOW VPRES RIS
CI
bttv0: reset, reinitialize
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: timeout: drop=0 irq=0/0, risc=0c31201c, bits: VSYNC HSYNC OFLOW VPRES RIS
CI
bttv0: reset, reinitialize
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: timeout: drop=0 irq=0/0, risc=0c31203c, bits: VSYNC HSYNC OFLOW VPRES RIS
CI


Has anyone ever had this error before?

Any help would be appreciated.

EDIT: I forgot to mention that I have tried all the Frequency sets and it didnt seem to change anything.

Also i have the right tuner and card setup as seen here:
Code:
bttv0: Bt848 (rev 18) at 0000:00:09.0, irq: 6, latency: 32, mmio: 0xd7000000
bttv0: using: STB, Gateway P/N 6000699 (bt848) [card=3,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
bttv0: using tuner=2
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
tuner 1-0063: chip found @ 0xc6 (bt848 #0 [sw])
tuner 1-0063: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
Top
 Profile  
 
tjc
 Post subject:
PostPosted: Wed Aug 02, 2006 5:09 pm 
Offline
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location: Arlington, MA
sgunther just posted this: http://mysettopbox.tv/phpBB2/viewtopic.php?t=11050

Also is that a Via chipset on that motherboard? See the "Hardware to Avoid" sticky for some info related to DMA problems there.
Top
 Profile  
 
mike7775
 Post subject: ... weird
PostPosted: Wed Aug 02, 2006 6:19 pm 
Offline
Joined: Sun Jul 30, 2006 3:18 am
Posts: 3
Ok... I got it (kinda) working... but it was a weird way to do it.

I remember i used to be able to get at least static with green (before I knew how to edit the to edit the tuner settings in the modules.conf file)

then i just remembered that I changed out the LAN card cause the old one couldnt connect to the internet (for some reason) so I was sitting here thinking, "maybe I should try swapping it back out" so I replaced the new one back with the old one.

What do you know, the error went away and I can watch some tv but some channels are missing cause now I cant download from zap2it, to download the channel list.

I dunno its justs weird.

Im gonna try a few more things but if you can think of a way maybe that my old LAN card can work please let me know (its a Linksys LNE100TX).
Top
 Profile  
 
tjc
 Post subject:
PostPosted: Wed Aug 02, 2006 6:46 pm 
Offline
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location: Arlington, MA
Don't know enough about the settings required for the BTTV drivers but it sounds like the change in LAN card is disrupting one of your "bus addresses", i.e. - the PCI address, the port assignments, the interupts, the DMA range, ... If any of those are coded into the BTTV config files you may need to adjust them.
Top
 Profile  
 
mike7775
 Post subject:
PostPosted: Wed Aug 02, 2006 7:28 pm 
Offline
Joined: Sun Jul 30, 2006 3:18 am
Posts: 3
tjc wrote:
Don't know enough about the settings required for the BTTV drivers but it sounds like the change in LAN card is disrupting one of your "bus addresses", i.e. - the PCI address, the port assignments, the interupts, the DMA range, ... If any of those are coded into the BTTV config files you may need to adjust them.


:D I changed the PCI addresses around, Now i got the other LAN card to work thanks for all the help :D
Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 


Board index KnoppMyth General

All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 18 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu