I am running KnoppMyth R5C7 on an

Epia ME6000
512MB Ram
250GB HD
PVR-150

The installation seemed to go very smoothly. Prior to installation I registered at Zap2it and the TV listings downloaded during setup. If I go back to setup I see all the channels from my lineup.

I can also watch DVDs and get on the internet without a problem but when I try to watch tv the screen just blinks at me. I can go through and get into every other menu except Watch TV. Nothing happens.

The PVR-150 is set to use Tuner by default and all I have is bunny ears for getting reception. Could this be caused by having Digital Channels in my lineup?

Any help is appreciated. Thanks.

See: http://www.knoppmythwiki.org/index.php?page=TroubleShooting
Especially: http://www.knoppmythwiki.org/index.php?page=BlackScreenWatchingTV
And: http://www.knoppmythwiki.org/index.php?page=CheckingLogFiles

Are there any errors in here I am not seeing.

I upgraded to ivtv version 0.4.6 and I when I try to watch TV it now gives me just a blank screen.

Aug 12 17:49:42 Silencio kernel: ivtv: ==================== START INIT IVTV ===
=================
Aug 12 17:49:42 Silencio kernel: ivtv: version 0.4.6 (tagged release) loading
Aug 12 17:49:42 Silencio kernel: ivtv: Linux version: 2.6.15-chw-2 SMP preempt
586 gcc-3.3
Aug 12 17:49:42 Silencio kernel: ivtv: In case of problems please include the d
ebug info between
Aug 12 17:49:42 Silencio kernel: ivtv: the START INIT IVTV and END INIT IVTV li
nes, along with
Aug 12 17:49:42 Silencio kernel: ivtv: any module options, when mailing the ivt
v-users mailinglist.
Aug 12 17:49:42 Silencio kernel: ivtv0: Autodetected WinTV PVR 150 card (cx23416
based)
Aug 12 17:49:42 Silencio kernel: ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LN
KB] -> GSI 10 (level, low) -> IRQ 10
Aug 12 17:49:42 Silencio kernel: ivtv0: Unreasonably low latency timer, setting
to 64 (was 32)
Aug 12 17:49:42 Silencio kernel: tveeprom: ivtv version
Aug 12 17:49:42 Silencio kernel: tveeprom: Hauppauge: model = 26132, rev = G1B2,
--More--
serial# = 9543367
Aug 12 17:49:42 Silencio kernel: tveeprom: tuner = TCL M2523_5N_E (idx = 112, ty
pe = 50)
Aug 12 17:49:42 Silencio kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v
4l2 = 0x00001000)
Aug 12 17:49:42 Silencio kernel: tveeprom: audio processor = CX25841 (type = 23)
Aug 12 17:49:42 Silencio kernel: tveeprom: decoder processor = CX25841 (type = 1
c)
Aug 12 17:49:42 Silencio kernel: ivtv0: i2c attach to card #0 ok [client=tveepro
m, addr=50]
Aug 12 17:49:42 Silencio kernel: tuner (ivtv): chip found at addr 0xc2 i2c-bus i
vtv i2c driver #0
Aug 12 17:49:42 Silencio kernel: ivtv0: i2c attach to card #0 ok [client=(tuner
unset), addr=61]
Aug 12 17:49:42 Silencio kernel: cx25840 0-0044: ivtv driver
Aug 12 17:49:42 Silencio kernel: cx25840 0-0044: cx25841-23 found @ 0x88 (ivtv i
2c driver #0)
Aug 12 17:49:46 Silencio kernel: cx25840 0-0044: loaded v4l-cx25840.fw firmware
(16382 bytes)
Aug 12 17:49:46 Silencio kernel: ivtv0: i2c attach to card #0 ok [client=cx25840
, addr=44]
Aug 12 17:49:46 Silencio kernel: wm8775 0-001b: chip found @ 0x36 (ivtv i2c driv
er #0)
--More--
Aug 12 17:49:46 Silencio kernel: ivtv0: i2c attach to card #0 ok [client=wm8775,
addr=1b]
Aug 12 17:49:47 Silencio kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (2621
44 bytes)
Aug 12 17:49:48 Silencio kernel: ivtv0: Encoder revision: 0x02050032
Aug 12 17:49:48 Silencio kernel: ivtv0: Allocate DMA encoder MPEG stream: 128 x
32768 buffers (4096KB total)
Aug 12 17:49:48 Silencio kernel: ivtv0: Allocate DMA encoder YUV stream: 194 x 1
0800 buffers (2048KB total)
Aug 12 17:49:48 Silencio kernel: ivtv0: Allocate DMA encoder VBI stream: 120 x 1
7472 buffers (2048KB total)
Aug 12 17:49:48 Silencio kernel: ivtv0: Allocate DMA encoder PCM audio stream: 4
55 x 4608 buffers (2048KB total)
Aug 12 17:49:48 Silencio kernel: tuner: type set to 50 (TCL 2002N) by ivtv i2c d
river #0
Aug 12 17:49:48 Silencio kernel: ivtv0: Initialized WinTV PVR 150, card #0
Aug 12 17:49:48 Silencio kernel: ivtv: ==================== END INIT IVTV ===
=================
Aug 12 18:41:37 Silencio kernel: ivtv: ==================== START INIT IVTV ===
=================
Aug 12 18:41:37 Silencio kernel: ivtv: version 0.4.6 (tagged release) loading
Aug 12 18:41:37 Silencio kernel: ivtv: Linux version: 2.6.15-chw-2 SMP preempt
586 gcc-3.3
--More--
Aug 12 18:41:37 Silencio kernel: ivtv: In case of problems please include the d
ebug info between
Aug 12 18:41:37 Silencio kernel: ivtv: the START INIT IVTV and END INIT IVTV li
nes, along with
Aug 12 18:41:37 Silencio kernel: ivtv: any module options, when mailing the ivt
v-users mailinglist.
Aug 12 18:41:37 Silencio kernel: ivtv0: Autodetected WinTV PVR 150 card (cx23416
based)
Aug 12 18:41:37 Silencio kernel: ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LN
KB] -> GSI 10 (level, low) -> IRQ 10
Aug 12 18:41:37 Silencio kernel: ivtv0: Unreasonably low latency timer, setting
to 64 (was 32)
Aug 12 18:41:37 Silencio kernel: tveeprom: ivtv version
Aug 12 18:41:37 Silencio kernel: tveeprom: Hauppauge: model = 26132, rev = G1B2,
serial# = 9543367
Aug 12 18:41:37 Silencio kernel: tveeprom: tuner = TCL M2523_5N_E (idx = 112, ty
pe = 50)
Aug 12 18:41:37 Silencio kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v
4l2 = 0x00001000)
Aug 12 18:41:37 Silencio kernel: tveeprom: audio processor = CX25841 (type = 23)
Aug 12 18:41:37 Silencio kernel: tveeprom: decoder processor = CX25841 (type = 1
c)
Aug 12 18:41:37 Silencio kernel: ivtv0: i2c attach to card #0 ok [client=tveepro
--More--
m, addr=50]
Aug 12 18:41:37 Silencio kernel: tuner (ivtv): chip found at addr 0xc2 i2c-bus i
vtv i2c driver #0
Aug 12 18:41:37 Silencio kernel: ivtv0: i2c attach to card #0 ok [client=(tuner
unset), addr=61]
Aug 12 18:41:37 Silencio kernel: cx25840 0-0044: ivtv driver
Aug 12 18:41:37 Silencio kernel: cx25840 0-0044: cx25841-23 found @ 0x88 (ivtv i
2c driver #0)
Aug 12 18:41:41 Silencio kernel: cx25840 0-0044: loaded v4l-cx25840.fw firmware
(16382 bytes)
Aug 12 18:41:41 Silencio kernel: ivtv0: i2c attach to card #0 ok [client=cx25840
, addr=44]
Aug 12 18:41:41 Silencio kernel: wm8775 0-001b: chip found @ 0x36 (ivtv i2c driv
er #0)
Aug 12 18:41:41 Silencio kernel: ivtv0: i2c attach to card #0 ok [client=wm8775,
addr=1b]
Aug 12 18:41:42 Silencio kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (2621
44 bytes)
Aug 12 18:41:43 Silencio kernel: ivtv0: Encoder revision: 0x02050032
Aug 12 18:41:43 Silencio kernel: ivtv0: Allocate DMA encoder MPEG stream: 128 x
32768 buffers (4096KB total)
Aug 12 18:41:43 Silencio kernel: ivtv0: Allocate DMA encoder YUV stream: 194 x 1
0800 buffers (2048KB total)
--More--
Aug 12 18:41:43 Silencio kernel: ivtv0: Allocate DMA encoder VBI stream: 120 x 1
7472 buffers (2048KB total)
Aug 12 18:41:43 Silencio kernel: ivtv0: Allocate DMA encoder PCM audio stream: 4
55 x 4608 buffers (2048KB total)
Aug 12 18:41:43 Silencio kernel: tuner: type set to 50 (TCL 2002N) by ivtv i2c d
river #0
Aug 12 18:41:43 Silencio kernel: ivtv0: Initialized WinTV PVR 150, card #0
Aug 12 18:41:43 Silencio kernel: ivtv: ==================== END INIT IVTV ===

That looks good. Your problem now is most likley one of the other issues described in the BlackScreenWatchingTV troubleshooting page. Wrong frequency set (with bunny ears I'm betting you want one of the broadcast ones), making input connections for all the inputs instead of just the tuner, ... Please go through the check list on that page and tell us what you've tried if you don't find a solution.

OBTW - It's _very_ easy to trim your lineup at zap2it to just include the channels you get. Simply a matter of unchecking items and hitting the save button. You really don't want to clutter up your program guide with useless information.