I recently upgraded to R5D1. I had alot of issues with HDTV and sound, so I went back to R5C7. Now in the R5D1 irblaster.sh script, it had the option for my dish network reciever , the 301. Now irblaster was something I had only tried with R5D1, and it worked great. But going back to R5C7, i no longer get the option for my reciever. Is there a way to get the irblaster stuff from R5D1 and install it on R5C7?
Is it as simple as copying some files? I have a working install of R5D1 on my laptop. Could it be as simple as copying things over, and if so, what?

Thanks.

_________________
Knoppmyth R5D1 - Mythtv .20svn-fixes
HD Frontend/Master Backend
AMD64 3200+-1GB Corsair-800GB LVM PATA/SATA
Biostar GeForce 6100 Motherboard M109
1x Air2Pc rev.2 1x PVR150MCE
Maddog DVD/RW-DL Drive

/etc/init.d/irblaster
/etc/irblaster/irblasterd.conf
/etc/irblaster/hardware.conf
/etc/irblaster/channel_change.sh

ok. i have copied those files as well as the contents of /usr/local/share/knoppmyth/remotes/Dish_Network_301 over to my R5C7 install, and now everything is groovy. All I have to remember to do is schedule the recording to start 1 minute early, so that the irblaster has time to change the channel. To recap, here is what I did.

Get the remote code file from R5D1

After NFS mounting mythcenter to the laptop

As well as getting the following files:


And now everything works great, I did not even have to re-run the irblaster.sh script, although when test running it, the Dish 301 option did appear in the list.

Now everything works. Thanks for all the help.

_________________
Knoppmyth R5D1 - Mythtv .20svn-fixes
HD Frontend/Master Backend
AMD64 3200+-1GB Corsair-800GB LVM PATA/SATA
Biostar GeForce 6100 Motherboard M109
1x Air2Pc rev.2 1x PVR150MCE
Maddog DVD/RW-DL Drive