View unanswered posts    View active topics

Board index KnoppMyth Hardware

All times are UTC - 6 hours





Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
ymoona
PostPosted: Tue Oct 03, 2006 2:35 pm 
Offline
Joined: Tue Sep 26, 2006 11:10 am
Posts: 2
HI there!

I have a problem using a new release of the haupage PVR 500
this is my /var/log/massages
Code:
Oct  3 22:25:32 mythtv kernel: ivtv:  ==================== START INIT IVTV ====================
Oct  3 22:25:32 mythtv kernel: ivtv:  version 0.7.0 (tagged release) loading
Oct  3 22:25:32 mythtv kernel: ivtv:  Linux version: 2.6.17-chw-8 SMP preempt mod_unload 586 gcc-3.4
Oct  3 22:25:32 mythtv kernel: ivtv:  In case of problems please include the debug info between
Oct  3 22:25:32 mythtv kernel: ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
Oct  3 22:25:32 mythtv kernel: ivtv:  any module options, when mailing the ivtv-users mailinglist.
Oct  3 22:25:33 mythtv kernel: ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
Oct  3 22:25:33 mythtv kernel: ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Oct  3 22:25:33 mythtv kernel: ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
Oct  3 22:25:33 mythtv kernel: tuner 1-0060: TEA5767 detected.
Oct  3 22:25:33 mythtv kernel: tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0)
Oct  3 22:25:33 mythtv kernel: tuner 1-0060: type set to 62 (Philips TEA5767HN FM Radio)
Oct  3 22:25:33 mythtv kernel: tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
Oct  3 22:25:33 mythtv kernel: tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
Oct  3 22:25:33 mythtv kernel: cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
Oct  3 22:25:36 mythtv kernel: cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
Oct  3 22:25:36 mythtv kernel: wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
Oct  3 22:25:36 mythtv kernel: tveeprom 1-0050: Hauppauge model 23559, rev D596, serial# 9822816
Oct  3 22:25:36 mythtv kernel: tveeprom 1-0050: tuner model is Samsung TCPG_6121P30A (idx 96, type 4)
Oct  3 22:25:36 mythtv kernel: tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
Oct  3 22:25:36 mythtv kernel: tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
Oct  3 22:25:36 mythtv kernel: tveeprom 1-0050: audio processor is CX25843 (idx 37)
Oct  3 22:25:36 mythtv kernel: tveeprom 1-0050: decoder processor is CX25843 (idx 30)
Oct  3 22:25:36 mythtv kernel: tveeprom 1-0050: has radio, has no IR remote
Oct  3 22:25:36 mythtv kernel: ivtv0: This is the first unit of a PVR500
Oct  3 22:25:37 mythtv kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
Oct  3 22:25:38 mythtv kernel: ivtv0: Encoder revision: 0x02050032
Oct  3 22:25:38 mythtv kernel: ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
Oct  3 22:25:38 mythtv kernel: ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
Oct  3 22:25:38 mythtv kernel: ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
Oct  3 22:25:38 mythtv kernel: ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
Oct  3 22:25:38 mythtv kernel: ivtv0: Create encoder radio stream
Oct  3 22:25:38 mythtv kernel: tuner 1-0061: tuner type not set
Oct  3 22:25:38 mythtv kernel: tuner 1-0061: tuner type not set
Oct  3 22:25:38 mythtv kernel: ivtv0: Initialized WinTV PVR 500 (unit #1), card #0
Oct  3 22:25:38 mythtv kernel: ivtv:  ======================  NEXT CARD  ======================
Oct  3 22:25:38 mythtv kernel: ivtv1: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
Oct  3 22:25:38 mythtv kernel: ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
Oct  3 22:25:38 mythtv kernel: ivtv1: Unreasonably low latency timer, setting to 64 (was 32)
Oct  3 22:25:38 mythtv kernel: tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1)
Oct  3 22:25:38 mythtv kernel: tda9887 2-0043: chip found @ 0x86 (ivtv i2c driver #1)
Oct  3 22:25:38 mythtv kernel: cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
Oct  3 22:25:42 mythtv kernel: cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
Oct  3 22:25:42 mythtv kernel: wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1)
Oct  3 22:25:42 mythtv kernel: tveeprom 2-0050: Hauppauge model 23559, rev D596, serial# 9822816
Oct  3 22:25:42 mythtv kernel: tveeprom 2-0050: tuner model is Samsung TCPG_6121P30A (idx 96, type 4)
Oct  3 22:25:42 mythtv kernel: tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
Oct  3 22:25:42 mythtv kernel: tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
Oct  3 22:25:42 mythtv kernel: tveeprom 2-0050: audio processor is CX25843 (idx 37)
Oct  3 22:25:42 mythtv kernel: tveeprom 2-0050: decoder processor is CX25843 (idx 30)
Oct  3 22:25:42 mythtv kernel: tveeprom 2-0050: has radio, has no IR remote
Oct  3 22:25:42 mythtv kernel: ivtv1: This is the second unit of a PVR500
Oct  3 22:25:42 mythtv kernel: ivtv1: Correcting tveeprom data: no radio present on second unit
Oct  3 22:25:43 mythtv kernel: ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
Oct  3 22:25:43 mythtv kernel: ivtv1: Encoder revision: 0x02050032
Oct  3 22:25:43 mythtv kernel: ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
Oct  3 22:25:43 mythtv kernel: ivtv1: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
Oct  3 22:25:43 mythtv kernel: ivtv1: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
Oct  3 22:25:43 mythtv kernel: ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
Oct  3 22:25:43 mythtv kernel: tuner 2-0061: tuner type not set
Oct  3 22:25:43 mythtv kernel: tuner 2-0061: tuner type not set
Oct  3 22:25:43 mythtv kernel: ivtv1: Initialized WinTV PVR 500 (unit #2), card #1
Oct  3 22:25:43 mythtv kernel: ivtv:  ====================  END INIT IVTV  ====================
Oct  3 22:25:43 mythtv pci.agent[4052]:      ivtv: loaded successfully


the card looks like it is working but I cannot scan channels, even if I set the frequency manually and cat the device I only get noise.

I using the latest knoppmtyh version R5D1.

what am I doing wrong?
Top
 Profile  
 
baishen78
 Post subject:
PostPosted: Tue Oct 03, 2006 3:03 pm 
Offline
Joined: Sun Aug 27, 2006 2:31 pm
Posts: 287
Quote:
Oct 3 22:25:43 mythtv kernel: tuner 2-0061: tuner type not set
Oct 3 22:25:43 mythtv kernel: tuner 2-0061: tuner type not set


There's your problem. Although I'm not sure what value you need to set them to.

_________________
KM R5E50; K8NGM2; A64-3800+; 1024MB PC3200; LG DVD-RW; Seagate 750GB; 6600 PCI-E; Onboard sound; Hauppauge PVR-150
Top
 Profile  
 
tjc
 Post subject:
PostPosted: Tue Oct 03, 2006 9:04 pm 
Offline
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location: Arlington, MA
As described on the troubleshooting page on the wiki: http://www.knoppmythwiki.org/index.php?page=BlackScreenWatchingTV

- Follow the link to the CompileIvtv page and try upgrading to ivtv 0.7.1
- Check the ivtv mailing list to see if there's an appropriate tuner type to use, folow the link to the TVCaptureCards page and force the tuner type via the modprobe.conf file.

OBTW - Searching the forums should have found the link to this thread which contains a simple patch - http://www.gossamer-threads.com/lists/i ... ung;#31467
Top
 Profile  
 
ymoona
 Post subject:
PostPosted: Mon Oct 09, 2006 1:51 pm 
Offline
Joined: Tue Sep 26, 2006 11:10 am
Posts: 2
I finally got ik working, usinf this patch
http://www.mail-archive.com/ivtv-users@ ... 03739.html
It tunes now every frequency below 500 MHz fine!
but frequencies above that are a bit noisy.
this is NOT a cable problem, is it probably a driver bug?
Top
 Profile  
 
tjc
 Post subject:
PostPosted: Mon Oct 09, 2006 6:26 pm 
Offline
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location: Arlington, MA
Say rather that the driver hasn't caught up with that tuner chip yet. The ivtv, v4l and kernel folks are constantly playing catch up, since Hauppauge changes tuner chips more often than some people change their bedsheets. Also, some of the chip vendors (e.g. Samsung) are less than forthcoming with the programming data needed...

The next release of the kernel and drivers will probably have bertter support, but that takes time. :(
Top
 Profile  
 
Armblessed
 Post subject:
PostPosted: Sun Nov 05, 2006 1:10 pm 
Offline
Joined: Wed Sep 13, 2006 11:04 am
Posts: 14
Thanks for this thread. I finally got my PVR-500 working due to the info posted here.

I'm experiencing the same low quality picture issues as described here but I also found another thread somewhere (it's location eludes me at the moment) that mentions that an RF amp or some type of signal booster may improve the quality. I'll give it a try in a few days when i can get my mitts on one and let you know how it goes.

Thanks again
Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 


Board index KnoppMyth Hardware

All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 19 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu