View unanswered posts    View active topics

Board index KnoppMyth Hardware

All times are UTC - 6 hours





Post new topic Reply to topic  Page 1 of 1
  [ 3 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
simonf
 Post subject: SATA DVDRW Now Working!
PostPosted: Sat Oct 07, 2006 9:11 am 
Offline
Joined: Wed Nov 09, 2005 1:21 pm
Posts: 161
Location: Manchester UK
Hi all,

I have been using myth for a couple of years know and been adding bits to my box as and when nescessary. My box is very much a live project as the plasma I have has no tuner.

My latest upgrade involved a major switch I swapped the case motherboard and cpu.

I upgraded to

A 945 chipset motherboard (with 1 * ide controller) and 4 * SATA.
I930 cpu 3G Dual Core
Thermaltake silent tower (Fanless Heatsink)
Thermaltake mambo case.

I know have a almost silent system. :lol:

As mensioned above the new motherboard only has 1 ide controller.

The data I had was on a IDE hdd 200GB and it was 80% full so i wanted to keep my recordings. I tried to install a sata harddrive on the system before i went live with little success I wanted to use the legasy mode in the bios but even though the bios said the sata was a primary master myth still saw it as /dev/sda. I started to do a manual install but was worried how I would upgrade in the future.

Anyhow I intend to upgrade the hard drive later clone it to a 400g or so I will stick to ide untill myth will do a auto upgrade automaticly, need to be able to get the box back up and running quickly.

I am a little concerned about putting both the data and dvdrw on the same cable so I have got myself a SATA dvdrw the only thing is I cant get it to go.

I have looked in the /etc/fstab but i cant figure out where to set /dev/dvd and /dev/cdrom to = /dev/sda.

Anybody any pointers.

Rgds,

Simon

_________________
Running:-
Intel 930 3GHz dual Core
Thermaltake Fanless CPU Cooler
Asus P5GS
Samsung 750G Sata HDD
8400 512m Video Card
2 * jetway DVB-t
1 * Haupage DVB-S2 Card
Samsung Sata 16x DVDRW
2048M Ram
1 * Netop Ion 330


Last edited by simonf on Tue Oct 10, 2006 3:10 pm, edited 1 time in total.
Top
 Profile  
 
simonf
 Post subject: More Info
PostPosted: Sat Oct 07, 2006 10:07 am 
Offline
Joined: Wed Nov 09, 2005 1:21 pm
Posts: 161
Location: Manchester UK
PS Heres the relivent bits of my kernal log



Code:
Oct  6 18:23:41 mythtv kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Oct  6 18:23:41 mythtv kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Oct  6 18:23:41 mythtv kernel: ICH7: IDE controller at PCI slot 0000:00:1f.1
Oct  6 18:23:41 mythtv kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
Oct  6 18:23:41 mythtv kernel: ICH7: chipset revision 1
Oct  6 18:23:41 mythtv kernel: ICH7: not 100%% native mode: will probe irqs later
Oct  6 18:23:41 mythtv kernel:     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
Oct  6 18:23:41 mythtv kernel: Probing IDE interface ide0...
Oct  6 18:23:41 mythtv kernel: hda: Maxtor 6L200P0, ATA DISK drive
Oct  6 18:23:41 mythtv kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct  6 18:23:41 mythtv kernel: Probing IDE interface ide1...
Oct  6 18:23:41 mythtv kernel: hda: max request size: 512KiB
Oct  6 18:23:41 mythtv kernel: hda: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63, UDMA(100)
Oct  6 18:23:41 mythtv kernel: hda: cache flushes supported
Oct  6 18:23:41 mythtv kernel:  hda: hda1 hda2 hda3 hda4
Oct  6 18:23:41 mythtv kernel: libata version 1.20 loaded.
Oct  6 18:23:41 mythtv kernel: ata_piix 0000:00:1f.2: version 1.05
Oct  6 18:23:41 mythtv kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
Oct  6 18:23:41 mythtv kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
Oct  6 18:23:41 mythtv kernel: PCI: Setting latency timer of device 0000:00:1f.2 to 64
Oct  6 18:23:41 mythtv kernel: ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE882 bmdma 0xE400 irq 19
Oct  6 18:23:41 mythtv kernel: ata2: SATA max UDMA/133 cmd 0xE800 ctl 0xE482 bmdma 0xE408 irq 19
Oct  6 18:23:41 mythtv kernel: ata1: dev 0 cfg 49:0f00 82:0000 83:4000 84:4000 85:0000 86:0000 87:4000 88:0407
Oct  6 18:23:41 mythtv kernel: ata1: dev 0 ATAPI, max UDMA/33
Oct  6 18:23:41 mythtv kernel: ata1(0): applying bridge limits
Oct  6 18:23:41 mythtv kernel: ata1: PIO error
Oct  6 18:23:41 mythtv kernel: ata1: dev 1 failed to IDENTIFY (I/O error)
Oct  6 18:23:41 mythtv kernel: ata1: dev 0 configured for UDMA/33
Oct  6 18:23:41 mythtv kernel: scsi0 : ata_piix
Oct  6 18:23:41 mythtv kernel: ata2: SATA port has no device.
Oct  6 18:23:41 mythtv kernel: scsi1 : ata_piix
Oct  6 18:23:41 mythtv kernel:   Vendor: TSSTcorp  Model: CD/DVDW SH-W163A  Rev: TS01
Oct  6 18:23:41 mythtv kernel:   Type:   CD-ROM                             ANSI SCSI revision: 05
Oct  6 18:23:41 mythtv kernel: sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Oct  6 18:23:41 mythtv kernel: Uniform CD-ROM driver Revision: 3.20
Oct  6 18:23:41 mythtv kernel: sr 0:0:0:0: Attached scsi CD-ROM sr0

_________________
Running:-
Intel 930 3GHz dual Core
Thermaltake Fanless CPU Cooler
Asus P5GS
Samsung 750G Sata HDD
8400 512m Video Card
2 * jetway DVB-t
1 * Haupage DVB-S2 Card
Samsung Sata 16x DVDRW
2048M Ram
1 * Netop Ion 330
Top
 Profile  
 
simonf
 Post subject: Almost there. Done
PostPosted: Mon Oct 09, 2006 2:16 pm 
Offline
Joined: Wed Nov 09, 2005 1:21 pm
Posts: 161
Location: Manchester UK
Hi all,

I have almost cracked it,

I deleted

/dev/cdrom
/dev/dvd

then added

ln -s /dev/sr0 /dev/cdrom
ln -s /dev/sr0 /dev/dvd

now xine plays dvds !!

Although when i tried to write a dvd i got a backend crash

can't connect to backend is it running !

I will continue to experiment and let you know how I went on

SATA DVD writers may be the answer to our prayers if you want to continue using ide drives and only have one ide channel.

Ok now fixed it, motherboard was set to compatability mode which messed up the hard drive it would only go in PIO mode. Don't think it could read the data off the hard drive fast enough to write to the dvd!

So Sata DVD Writers go in Myth !!!!!!!!!

_________________
Running:-
Intel 930 3GHz dual Core
Thermaltake Fanless CPU Cooler
Asus P5GS
Samsung 750G Sata HDD
8400 512m Video Card
2 * jetway DVB-t
1 * Haupage DVB-S2 Card
Samsung Sata 16x DVDRW
2048M Ram
1 * Netop Ion 330
Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 3 posts ] 


Board index KnoppMyth Hardware

All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 18 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu