View unanswered posts    View active topics

Board index KnoppMyth Hardware

All times are UTC - 6 hours





Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
andysl
 Post subject: Tuner Winfast DTV1000 T
PostPosted: Mon Oct 16, 2006 3:05 am 
Offline
Joined: Sat Sep 09, 2006 2:40 am
Posts: 38
Location: Australia
Hey guys,

I installed this card a week or so ago, and it worked pretty much straight out of the box. Havent had a great deal of time this week to tinker, but have been able to get a few channels going.

Tonight i'm trying to get the remote working. I've found the card runs on "Chipset - Conexant CX23881 + Conexant CX22702" (straight from the cards site).
So i assume i have to update the cx88 driver? I've tried to follow the instructions on the cx88 "build HowTo" page ([url]http://linux.bytesex.org/v4l2/build.html[/url]) but am at a loss.

During the setup i remember a section came up and asked what kind of remote i was using. I selected none, because at the time i wasnt concerned. How can i get that back up?

Any help is greatly appreciated :D
Ta, Andy
Top
 Profile  
 
andysl
 Post subject:
PostPosted: Mon Oct 16, 2006 3:29 am 
Offline
Joined: Sat Sep 09, 2006 2:40 am
Posts: 38
Location: Australia
following this site:
[url]http://linuxtv.org/v4lwiki/index.php/Remote_controllers[/url]

i typed in:
[code]cat /proc/bus/input/devices[/code]

the output was:
[code]
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/class/input/input0
H: Handlers=kbd event0
B: EV=120013
B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7
[/code]

"N" does not appear to display my tuner card, and is "H" meant to display "event2"??

Or am i barking up the wrong tree all together?
Top
 Profile  
 
andysl
 Post subject:
PostPosted: Mon Oct 16, 2006 6:55 am 
Offline
Joined: Sat Sep 09, 2006 2:40 am
Posts: 38
Location: Australia
After doing some more reading tonight, is it an option to make up (or buy) a different IR cord to use instead? Would it be easier to connect it through the USB or serial port instead of the card?

Is that what is meant by 'dongle'?
Top
 Profile  
 
andysl
 Post subject:
PostPosted: Wed Nov 08, 2006 4:31 am 
Offline
Joined: Sat Sep 09, 2006 2:40 am
Posts: 38
Location: Australia
Hey guys,
It appears i've found something which may get my remote to work, however i've a bit stuck when it comes to using the code. If anyone could tell me how to use the following code i'd be most grateful!

From the page http://article.gmane.org/gmane.linux.drivers.dvb/27876:

Code:
--- a/linux/drivers/media/common/ir-keymaps.c   2006-08-07 14:18:54.000000000 +1000
+++ b/linux/drivers/media/common/ir-keymaps.c   2006-08-17 01:04:28.000000000 +1000
 <at>  <at>  -1285,7 +1285,25  <at>  <at>
    [ 0x23 ] = KEY_PLAYPAUSE,
    [ 0x24 ] = KEY_NEXT,
    [ 0x26 ] = KEY_STOP,
-   [ 0x27 ] = KEY_RECORD
+   [ 0x27 ] = KEY_RECORD,
+
+   /* Added by Adam for Y04G0004 Control */
+   [ 0x36 ] = KEY_TV,
+   [ 0x37 ] = KEY_RADIO,
+   [ 0x38 ] = KEY_DVD,
+   [ 0x29 ] = KEY_EXIT,
+   [ 0x30 ] = KEY_CHANNEL,
+   [ 0x2f ] = KEY_MENU,
+   [ 0x31 ] = KEY_EPG,
+   [ 0x32 ] = KEY_CHANNEL,
+   [ 0x33 ] = KEY_LANGUAGE,
+   [ 0x1e ] = KEY_VIDEO,
+   [ 0x1b ] = KEY_AUDIO,
+   [ 0x16 ] = KEY_SUBTITLE,
+   [ 0x11 ] = KEY_BACK,
+   [ 0x28 ] = KEY_SHUFFLE,
+   [ 0x25 ] = KEY_F23,
+   [ 0x2a ] = KEY_MODE
 };

 EXPORT_SYMBOL_GPL(ir_codes_winfast);
--- a/linux/drivers/media/video/cx88/cx88-cards.c   2006-08-07 14:18:54.000000000 +1000
+++ b/linux/drivers/media/video/cx88/cx88-cards.c   2006-08-17 01:05:13.000000000 +1000
 <at>  <at>  -865,6 +865,10  <at>  <at>
       .input          = {{
          .type   = CX88_VMUX_DVB,
          .vmux   = 0,
+         .gpio0   = 0x00F5e700,
+         .gpio1  = 0x00003004,
+         .gpio2  = 0x00F5e700,
+         .gpio3  = 0x02000000,
       }},
       .dvb            = 1,
    },
--- a/linux/drivers/media/video/cx88/cx88-input.c   2006-08-07 14:18:54.000000000 +1000
+++ b/linux/drivers/media/video/cx88/cx88-input.c   2006-08-17 01:04:56.000000000 +1000
 <at>  <at>  -173,6 +173,7  <at>  <at>
       ir->sampling = 1;
       break;
    case CX88_BOARD_WINFAST2000XP_EXPERT:
+   case CX88_BOARD_WINFAST_DTV1000:
       ir_codes = ir_codes_winfast;
       ir->gpio_addr = MO_GP0_IO;
       ir->mask_keycode = 0x8f8;
Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 


Board index KnoppMyth Hardware

All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 32 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu