View unanswered posts    View active topics

Board index Linux MythTV

All times are UTC - 6 hours





Post new topic Reply to topic  Page 2 of 3
  [ 31 posts ] 
Go to page Previous  1, 2, 3  Next
Print view Previous topic   Next topic  
Author Message
Search for:
WattoToydarian
 Post subject:
PostPosted: Sun Apr 09, 2006 6:23 pm 
Offline
Joined: Thu Jun 16, 2005 2:37 pm
Posts: 116
Location: St. Louis MO.
tjc wrote:
Try looking under the transcoding profile group...
Is this suppose to be in Recording Profiles? :? The only options I have in there is the PVR-150 profile and create a new profile group.
The options I have at the bottom of TV Settings are Playback Groups, Recording Profiles, and Recording Priorties. :?:

_________________
Backend: HP NetServer LT 6000r U3; 6 700Mhz Xeon CPUs; 3GB PC133 ECC; LSI Ultra160 SCSI 4 18GB 10kRPM striped system; 7200RPM 160GB recordings; Ubuntu-server 7.04; HDHomeRun box.
Frontend: A64 3000+; 512MB DDR; Hauppauge grey; knoppmyth PXE/NFS.
Top
 Profile  
 
tjc
 Post subject:
PostPosted: Sun Apr 09, 2006 6:48 pm 
Offline
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location: Arlington, MA
The full path from the top level menu is:
Utilities/Setup -> Setup -> TV Settings -> Recording Profiles -> Transcoders -> Autodetect from MPEG2 -> 1st page

Under:
Utilities/Setup -> Setup -> TV Settings -> Recording Profiles
You should have MPEG-2 Encoders (...) and Transcoders If you don't have both, then something went wrong with your install.
Top
 Profile  
 
WattoToydarian
 Post subject:
PostPosted: Sun Apr 09, 2006 7:16 pm 
Offline
Joined: Thu Jun 16, 2005 2:37 pm
Posts: 116
Location: St. Louis MO.
This is my Recording Profiles screen:
*Image outdated and removed*
So, something is screwed up I guess... I do remeber it being there before on another installation thow...

_________________
Backend: HP NetServer LT 6000r U3; 6 700Mhz Xeon CPUs; 3GB PC133 ECC; LSI Ultra160 SCSI 4 18GB 10kRPM striped system; 7200RPM 160GB recordings; Ubuntu-server 7.04; HDHomeRun box.
Frontend: A64 3000+; 512MB DDR; Hauppauge grey; knoppmyth PXE/NFS.


Last edited by WattoToydarian on Mon May 29, 2006 10:28 pm, edited 1 time in total.
Top
 Profile  
 
DrewCS
 Post subject:
PostPosted: Wed Apr 12, 2006 9:29 pm 
Offline
Joined: Sun Jun 12, 2005 11:24 am
Posts: 32
Location: East Lansing, MI
I have been using this lossless transcoder with my 250 recordinds and it works great when it is played back on my mythtv. When I try to burn the recordings to DVD using Mythburn some, but not all, of the recording has the audio cut off before the video is done.
Top
 Profile  
 
Greg Frost
 Post subject:
PostPosted: Thu Apr 13, 2006 5:32 am 
Offline
Joined: Mon May 10, 2004 8:08 pm
Posts: 1891
Location: Adelaide, Australia
The audio cutting out may be a project x issue. I saw talk once that the mpeg2 lossless transcode did the re-multiplexing into dvd compatible format itself. If this is true, it would mean that the entire project-x step could be skipped. If anyone gets around to trying that, please post back with your experience.
Top
 Profile  
 
misterflibble
 Post subject:
PostPosted: Thu Apr 13, 2006 10:25 am 
Offline
Joined: Mon Aug 01, 2005 10:18 am
Posts: 84
Greg: yeah its a ProjectX problem (and updating to 0.90.4 didn't fix it) when its being remultiplexed. Mythburn actually offers other re-multiplexing solutions in mythburn/scripts/remplex.sh. Uncommenting line 162 (replex $src dst) and commenting out 172 (remux_projectx..) makes it use an alternate one. I also had to chmod +x mythburn/scripts/replex-0.1.4/replex, but that could just be my installation. This seems to have worked, the one movie I tried still has sound in the last chapter instead of consistently dropping out during the first, although I haven't watched it all the way through. Unfortunately I couldn't get it to burn to a DVD because tcrequant isn't called by the replex function in the script and my DVD ended up a few megs too big. I wonder if it depends on projectx or if I could just copy the tcrequant call?

Relating to what you said about dvd compatible format: I also heard something similar about the capture format for MPEG2 streams: apart from the usual PS and TS there's also some available called DVD and DVD2. Anyone know if these would be better for future recordings?
Top
 Profile  
 
Greg Frost
 Post subject:
PostPosted: Thu Apr 13, 2006 5:14 pm 
Offline
Joined: Mon May 10, 2004 8:08 pm
Posts: 1891
Location: Adelaide, Australia
misterflibble wrote:
apart from the usual PS and TS there's also some available called DVD and DVD2.

I haven't seen those options. I use DVB, so may not have the choice. That may be a PVR card thing.
Top
 Profile  
 
Lueddich
 Post subject:
PostPosted: Tue Apr 18, 2006 8:37 am 
Offline
Joined: Mon Nov 28, 2005 6:25 am
Posts: 88
Location: Germany
Hi,

my mythtranscode doesn't work :( I have another detailled thread about this, maybe somebody could help me building a debug build to get a usable backtrace?

Please, have a look: http://mysettopbox.tv/phpBB2/viewtopic.php?t=9489&postdays=0&postorder=asc&start=0

mac, the guy who helped me so far, is "on tour" at the moment and not able to help me... I only need to know the next step ;)

Thank you!!

_________________
Shuttle SN68PTG5, AMD Athlon 64 5200+, HD 2TB Seagate, Hauppage Nova-T USB-Stick, Technotrend IR Receiver, LinHES 6
Top
 Profile  
 
WattoToydarian
 Post subject:
PostPosted: Mon May 29, 2006 10:34 pm 
Offline
Joined: Thu Jun 16, 2005 2:37 pm
Posts: 116
Location: St. Louis MO.
Well I fixed my problem with the recording profiles by doing a full R5C7 install.
Now when I goto transcode a movie it just says "Stop transcoding" but it's not doing anything, I tried restarting the box but it's still like that.
I think what happened is I tried to start the transcode on a remote frontend and it might be thinking that the job is running on the RFE and it's not because it's just a frontend and not a backend. :?
How do I reset it so it doesnt think it's transcoding anymore and I can start the transcode on the MBE?

_________________
Backend: HP NetServer LT 6000r U3; 6 700Mhz Xeon CPUs; 3GB PC133 ECC; LSI Ultra160 SCSI 4 18GB 10kRPM striped system; 7200RPM 160GB recordings; Ubuntu-server 7.04; HDHomeRun box.
Frontend: A64 3000+; 512MB DDR; Hauppauge grey; knoppmyth PXE/NFS.
Top
 Profile  
 
borgednow
 Post subject:
PostPosted: Tue Oct 10, 2006 2:22 pm 
Offline
Joined: Wed Aug 23, 2006 3:07 pm
Posts: 339
I've followed the directions and checked the box for lossless transcoding, but is there somewhere I need to tell it to use that encoding?

I've been hunting around but I'm not sure where, or if, there's a place i need to specify that it uses the mpeg 2 rather than high, low, medium, or the rtjpeg-mpeg-4 selections.

Does the software automatically use the mpeg-2 selection when transcoding then? If so, what are the other options (high, low, etc) in the list for?

I found in setup/general it gives me a selection box for recording to be auto-detect, high, medium, and low. Nothing about whether to use rtjpeg-mpeg-4 or mpeg-2.
Top
 Profile  
 
borgednow
 Post subject:
PostPosted: Tue Oct 10, 2006 10:29 pm 
Offline
Joined: Wed Aug 23, 2006 3:07 pm
Posts: 339
[quote="borgednow"]I've followed the directions and checked the box for lossless transcoding, but is there somewhere I need to tell it to use that encoding?

I've been hunting around but I'm not sure where, or if, there's a place i need to specify that it uses the mpeg 2 rather than high, low, medium, or the rtjpeg-mpeg-4 selections.

Does the software automatically use the mpeg-2 selection when transcoding then? If so, what are the other options (high, low, etc) in the list for?

I found in setup/general it gives me a selection box for recording to be auto-detect, high, medium, and low. Nothing about whether to use rtjpeg-mpeg-4 or mpeg-2.[/quote]

Well, the transcode fails now instead. I checked the recordingprofiles table, and everything shows up as using mpeg-4. Funny thing is that there seems to be multiple profile groups now, and two sets of values:


mysql> select * from recordingprofiles;
+----+----------------+------------+--------------+--------------+
| id | name | videocodec | audiocodec | profilegroup |
+----+----------------+------------+--------------+--------------+
| 1 | Default | MPEG-4 | Uncompressed | 1 |
| 2 | Live TV | MPEG-4 | Uncompressed | 1 |
| 3 | High Quality | MPEG-4 | Uncompressed | 1 |
| 4 | Low Quality | MPEG-4 | Uncompressed | 1 |
| 5 | Default | MPEG-4 | Uncompressed | 2 |
| 6 | Live TV | MPEG-4 | Uncompressed | 2 |
| 7 | High Quality | MPEG-4 | Uncompressed | 2 |
| 8 | Low Quality | MPEG-4 | Uncompressed | 2 |
| 9 | Default | MPEG-4 | Uncompressed | 3 |
| 10 | Live TV | MPEG-4 | Uncompressed | 3 |
| 11 | High Quality | MPEG-4 | Uncompressed | 3 |
| 12 | Low Quality | MPEG-4 | Uncompressed | 3 |
| 13 | Default | MPEG-4 | Uncompressed | 4 |
| 14 | Live TV | MPEG-4 | Uncompressed | 4 |
| 15 | High Quality | MPEG-4 | Uncompressed | 4 |
| 16 | Low Quality | MPEG-4 | Uncompressed | 4 |
| 17 | Default | MPEG-4 | Uncompressed | 5 |
| 18 | Live TV | MPEG-4 | Uncompressed | 5 |
| 19 | High Quality | MPEG-4 | Uncompressed | 5 |
| 20 | Low Quality | MPEG-4 | Uncompressed | 5 |
| 21 | RTjpeg/MPEG4 | MPEG-4 | Uncompressed | 6 |
| 22 | MPEG2 | MPEG-4 | Uncompressed | 6 |
| 23 | Default | MPEG-4 | Uncompressed | 8 |
| 24 | Live TV | MPEG-4 | Uncompressed | 8 |
| 25 | High Quality | MPEG-4 | Uncompressed | 8 |
| 26 | Low Quality | MPEG-4 | Uncompressed | 8 |
| 27 | High Quality | MPEG-4 | Uncompressed | 6 |
| 28 | Medium Quality | MPEG-4 | Uncompressed | 6 |
| 29 | Low Quality | MPEG-4 | Uncompressed | 6 |
+----+----------------+------------+--------------+--------------+
29 rows in set (0.01 sec)

Before I touched anything, this table looked like:
+----+--------------+------------+------------+--------------+
| id | name | videocodec | audiocodec | profilegroup |
+----+--------------+------------+------------+--------------+
| 1 | Default | NULL | NULL | 1 |
| 2 | Live TV | NULL | NULL | 1 |
| 3 | High-Quality | NULL | NULL | 1 |
| 4 | Low-Quality | NULL | NULL | 1 |
| 5 | Default | NULL | NULL | 2 |
| 6 | Live TV | NULL | NULL | 2 |
| 7 | High-Quality | NULL | NULL | 2 |
| 8 | Low-Quality | NULL | NULL | 2 |
| 9 | Default | NULL | NULL | 3 |
| 10 | Live TV | NULL | NULL | 3 |
| 11 | High-Quality | NULL | NULL | 3 |
| 12 | Low-Quality | NULL | NULL | 3 |
| 13 | RTjpeg/MPEG4 | NULL | NULL | 4 |
| 14 | MPEG2 | NULL | NULL | 4 |
+----+--------------+------------+------------+--------------+

I followed the directions to fix the transcoding errors I was getting:
http://mysettopbox.tv/phpBB2/viewtopic. ... dec++94210

by using the following query:
cd /myth/backup
mysqldump mythconverg > backup_before_I_updated_recordingprofiles.sql
#make a backup, always make a backup
mysql -umythtv -pmythtv mythconverg
update recordingprofiles set videocodec='MPEG-4',audiocodec='Uncompressed';
#above changes the table to have values in those fields
update jobqueue set status=1 where type=1 and status=304;
#above takes all the transcoding jobs (type=1) that have errored (Status=304) in the database

The transcoding worked, but it was using the lossy compression.

So I followed the transcoding change instructions to use lossless and it no longer works.
Top
 Profile  
 
bruce_s01
 Post subject:
PostPosted: Thu Oct 19, 2006 3:43 pm 
Offline
Joined: Tue Aug 08, 2006 7:08 pm
Posts: 561
Location: UK
borgednow wrote:
The transcoding worked, but it was using the lossy compression.

So I followed the transcoding change instructions to use lossless and it no longer works.


The same thing for me with a stock 5D1. Information Centre->System Status->Job Queue shows ERRORED for selected show.

Code:
2006-10-19 19:00:27.618 Transcode Starting for Alias "Phase One": 1.5 GB (Autode
tect)
2006-10-19 19:00:27.623 transcode: Transcode Starting: Alias "Phase One": 1.5 GB
 (Autodetect)
2006-10-19 19:00:28.630 Using runtime prefix = /usr
2006-10-19 19:00:28.767 New DB connection, total: 1
2006-10-19 19:00:28.807 Enabled verbose msgs: important
2006-10-19 19:00:28.810 New DB connection, total: 2
2006-10-19 19:00:28.811 Connected to database 'mythconverg' at host: localhost
2006-10-19 19:00:28.813 Transcoding from /myth/tv/1628_20061019130000.mpg to /my
th/tv/1628_20061019130000.mpg.tmp
2006-10-19 19:00:28.871 Connecting to backend server: 127.0.0.1:6543 (try 1 of 5
)
2006-10-19 19:00:28.878 Using protocol version 26
2006-10-19 19:00:28.884 MainServer::HandleAnnounce Monitor
2006-10-19 19:00:28.886 adding: homenet-pvr as a client (events: 0)
[mpeg @ 0xb7114278]Parser not found for Codec Id: 94210 !
0: start_time: 0.036 duration: 323.327
1: start_time: 303.714 duration: 323.337
2: start_time: 0.025 duration: 323.281
stream: start_time: 0.276 duration: 6966.954 bitrate=1814 kb/s
2006-10-19 19:00:29.055 AFD: Opened codec 0x80f0420, id(MPEG2VIDEO) type(Video)
2006-10-19 19:00:29.076 AFD: Opened codec 0x80f0c00, id(MP2) type(Audio)
2006-10-19 19:00:29.268 New DB connection, total: 3
2006-10-19 19:00:29.270 Connected to database 'mythconverg' at host: localhost
2006-10-19 19:00:29.276 Switching to MPEG-2 transcoder.
2006-10-19 19:00:29.349 Opening /myth/tv/1628_20061019130000.mpg
2006-10-19 19:00:29.357 Parser not found for Codec Id: 94210 !
2006-10-19 19:00:29.369 Input #0, mpeg, from '/myth/tv/1628_20061019130000.mpg':
2006-10-19 19:00:29.370   Duration: N/A, bitrate: N/A
2006-10-19 19:00:29.370   Stream #0.0[0x1e0], 25.00 fps(r): Video: mpeg2video, y
uv420p, 352x576, 3200 kb/s
2006-10-19 19:00:29.371   Stream #0.1[0x69]: Data: 0x0000
2006-10-19 19:00:29.371   Stream #0.2[0x1c0]: Audio: mp2, 48000 Hz, stereo, 256
kb/s
2006-10-19 19:00:29.371 Skipping unsupported codec 2 on stream 1
2006-10-19 19:00:29.374 #0 PTS:00:00:00.400 Delta: 0.0ms queue: 11
2006-10-19 19:00:29.374 #2 PTS:00:00:00.396 Delta: 4.28889ms queue: 2
2006-10-19 19:00:29.971 Converting frame #9 from B to I
2006-10-19 19:00:29.983 Converting frame #10 from B to I
2006-10-19 19:00:29.996 Converting frame #11 from P to I
Mux rate: 3.51 Mbit/s
2006-10-19 19:00:57.429 Converting frame #6 from B to I
2006-10-19 19:00:57.462 Converting frame #7 from B to I
2006-10-19 19:00:57.474 Converting frame #8 from P to I
2006-10-19 19:01:27.931 Converting frame #0 from B to I
2006-10-19 19:01:27.952 Converting frame #1 from B to I
2006-10-19 19:01:32.513 Converting frame #6 from B to I
2006-10-19 19:01:32.547 Converting frame #7 from B to I
2006-10-19 19:01:32.558 Converting frame #8 from P to I
2006-10-19 19:02:12.198 Converting frame #3 from B to I
2006-10-19 19:02:12.235 Converting frame #4 from B to I
2006-10-19 19:02:12.252 Converting frame #5 from P to I
2006-10-19 19:02:17.315 Converting frame #6 from B to I
2006-10-19 19:02:17.351 Converting frame #7 from B to I
2006-10-19 19:02:17.364 Converting frame #8 from P to I
2006-10-19 19:02:23.302 Converting frame #9 from B to I
2006-10-19 19:02:23.314 Converting frame #10 from B to I
2006-10-19 19:02:23.327 Converting frame #11 from P to I
2006-10-19 19:02:27.061 Unknown socket closing
2006-10-19 19:02:28.484 Transcode Running for Alias "Phase One": 1.5 GB => 0 byt
es (Autodetect)
2006-10-19 19:02:28.545 transcode: Transcode Running: Alias "Phase One"
2006-10-19 19:02:28.551 Transcode Starting for Alias "Phase One": 1.5 GB (Autode
tect)
2006-10-19 19:02:28.554 transcode: Transcode Starting: Alias "Phase One": 1.5 GB
 (Autodetect)
2006-10-19 19:02:29.729 Using runtime prefix = /usr
2006-10-19 19:02:29.913 New DB connection, total: 1
2006-10-19 19:02:29.949 Enabled verbose msgs: important
2006-10-19 19:02:29.969 New DB connection, total: 2
2006-10-19 19:02:29.975 Connected to database 'mythconverg' at host: localhost
2006-10-19 19:02:29.977 Transcoding from /myth/tv/1628_20061019130000.mpg to /my
th/tv/1628_20061019130000.mpg.tmp
2006-10-19 19:02:30.054 Connecting to backend server: 127.0.0.1:6543 (try 1 of 5
)
2006-10-19 19:02:30.062 Using protocol version 26
2006-10-19 19:02:30.068 MainServer::HandleAnnounce Monitor
2006-10-19 19:02:30.070 adding: homenet-pvr as a client (events: 0)
[mpeg @ 0xb70b8278]Parser not found for Codec Id: 94210 !
0: start_time: 0.036 duration: 323.327
1: start_time: 303.714 duration: 323.337
2: start_time: 0.025 duration: 323.281
stream: start_time: 0.276 duration: 6966.954 bitrate=1814 kb/s
2006-10-19 19:02:30.657 AFD: Opened codec 0x80f02c0, id(MPEG2VIDEO) type(Video)
2006-10-19 19:02:30.685 AFD: Opened codec 0x80f0aa0, id(MP2) type(Audio)
2006-10-19 19:02:30.880 New DB connection, total: 3
2006-10-19 19:02:30.881 Connected to database 'mythconverg' at host: localhost
2006-10-19 19:02:30.889 Switching to MPEG-2 transcoder.
2006-10-19 19:02:30.897 Opening /myth/tv/1628_20061019130000.mpg
2006-10-19 19:02:30.898 Parser not found for Codec Id: 94210 !
2006-10-19 19:02:30.908 Input #0, mpeg, from '/myth/tv/1628_20061019130000.mpg':
2006-10-19 19:02:30.909   Duration: N/A, bitrate: N/A
2006-10-19 19:02:30.910   Stream #0.0[0x1e0], 25.00 fps(r): Video: mpeg2video, y
uv420p, 352x576, 3200 kb/s
2006-10-19 19:02:30.910   Stream #0.1[0x69]: Data: 0x0000
2006-10-19 19:02:30.911   Stream #0.2[0x1c0]: Audio: mp2, 48000 Hz, stereo, 256
kb/s
2006-10-19 19:02:30.911 Skipping unsupported codec 2 on stream 1
2006-10-19 19:02:30.914 #0 PTS:00:00:00.400 Delta: 0.0ms queue: 11
2006-10-19 19:02:30.914 #2 PTS:00:00:00.396 Delta: 4.28889ms queue: 2
2006-10-19 19:02:31.671 Converting frame #9 from B to I
2006-10-19 19:02:31.728 Converting frame #10 from B to I
2006-10-19 19:02:31.740 Converting frame #11 from P to I
Mux rate: 3.51 Mbit/s
2006-10-19 19:02:59.010 Converting frame #6 from B to I
2006-10-19 19:02:59.114 Converting frame #7 from B to I
2006-10-19 19:02:59.128 Converting frame #8 from P to I
2006-10-19 19:03:29.583 Converting frame #0 from B to I
2006-10-19 19:03:29.624 Converting frame #1 from B to I
2006-10-19 19:03:34.946 Converting frame #6 from B to I
2006-10-19 19:03:34.958 Converting frame #7 from B to I
2006-10-19 19:03:34.970 Converting frame #8 from P to I
2006-10-19 19:04:15.932 Converting frame #3 from B to I
2006-10-19 19:04:15.983 Converting frame #4 from B to I
2006-10-19 19:04:15.999 Converting frame #5 from P to I
2006-10-19 19:04:21.307 Converting frame #6 from B to I
2006-10-19 19:04:21.319 Converting frame #7 from B to I
2006-10-19 19:04:21.354 Converting frame #8 from P to I
2006-10-19 19:04:27.697 Converting frame #9 from B to I
2006-10-19 19:04:27.769 Converting frame #10 from B to I
2006-10-19 19:04:27.781 Converting frame #11 from P to I
2006-10-19 19:04:31.653 Unknown socket closing
2006-10-19 19:04:33.010 Transcode Running for Alias "Phase One": 1.5 GB => 0 byt
es (Autodetect)
2006-10-19 19:04:33.080 transcode: Transcode Running: Alias "Phase One"
2006-10-19 19:04:33.088 Transcode Starting for Alias "Phase One": 1.5 GB (Autode
tect)
2006-10-19 19:04:33.090 transcode: Transcode Starting: Alias "Phase One": 1.5 GB
 (Autodetect)
2006-10-19 19:04:34.214 Using runtime prefix = /usr
2006-10-19 19:04:34.398 New DB connection, total: 1
2006-10-19 19:04:34.443 Enabled verbose msgs: important
2006-10-19 19:04:34.470 New DB connection, total: 2
2006-10-19 19:04:34.476 Connected to database 'mythconverg' at host: localhost
2006-10-19 19:04:34.479 Transcoding from /myth/tv/1628_20061019130000.mpg to /my
th/tv/1628_20061019130000.mpg.tmp
2006-10-19 19:04:34.564 Connecting to backend server: 127.0.0.1:6543 (try 1 of 5
)
2006-10-19 19:04:34.572 Using protocol version 26
2006-10-19 19:04:34.578 MainServer::HandleAnnounce Monitor
2006-10-19 19:04:34.580 adding: homenet-pvr as a client (events: 0)
[mpeg @ 0xb70cf278]Parser not found for Codec Id: 94210 !
0: start_time: 0.036 duration: 323.327
1: start_time: 303.714 duration: 323.337
2: start_time: 0.025 duration: 323.281
stream: start_time: 0.276 duration: 6966.954 bitrate=1814 kb/s
2006-10-19 19:04:35.092 AFD: Opened codec 0x80f0240, id(MPEG2VIDEO) type(Video)
2006-10-19 19:04:35.117 AFD: Opened codec 0x80f0e30, id(MP2) type(Audio)
2006-10-19 19:04:35.319 New DB connection, total: 3
2006-10-19 19:04:35.320 Connected to database 'mythconverg' at host: localhost
2006-10-19 19:04:35.327 Switching to MPEG-2 transcoder.
2006-10-19 19:04:35.336 Opening /myth/tv/1628_20061019130000.mpg
2006-10-19 19:04:35.337 Parser not found for Codec Id: 94210 !
2006-10-19 19:04:35.347 Input #0, mpeg, from '/myth/tv/1628_20061019130000.mpg':
2006-10-19 19:04:35.348   Duration: N/A, bitrate: N/A
2006-10-19 19:04:35.349   Stream #0.0[0x1e0], 25.00 fps(r): Video: mpeg2video, y
uv420p, 352x576, 3200 kb/s
2006-10-19 19:04:35.349   Stream #0.1[0x69]: Data: 0x0000
2006-10-19 19:04:35.349   Stream #0.2[0x1c0]: Audio: mp2, 48000 Hz, stereo, 256
kb/s
2006-10-19 19:04:35.350 Skipping unsupported codec 2 on stream 1
2006-10-19 19:04:35.353 #0 PTS:00:00:00.400 Delta: 0.0ms queue: 11
2006-10-19 19:04:35.353 #2 PTS:00:00:00.396 Delta: 4.28889ms queue: 2
2006-10-19 19:04:36.130 Converting frame #9 from B to I
2006-10-19 19:04:36.174 Converting frame #10 from B to I
2006-10-19 19:04:36.186 Converting frame #11 from P to I
Mux rate: 3.51 Mbit/s
2006-10-19 19:05:04.747 Converting frame #6 from B to I
2006-10-19 19:05:04.790 Converting frame #7 from B to I
2006-10-19 19:05:04.804 Converting frame #8 from P to I
2006-10-19 19:05:37.471 Converting frame #0 from B to I
2006-10-19 19:05:37.746 Converting frame #1 from B to I
2006-10-19 19:05:42.339 Converting frame #6 from B to I
2006-10-19 19:05:42.351 Converting frame #7 from B to I
2006-10-19 19:05:42.363 Converting frame #8 from P to I
2006-10-19 19:06:24.106 Converting frame #3 from B to I
2006-10-19 19:06:24.165 Converting frame #4 from B to I
2006-10-19 19:06:24.182 Converting frame #5 from P to I
2006-10-19 19:06:30.341 Converting frame #6 from B to I
2006-10-19 19:06:30.354 Converting frame #7 from B to I
2006-10-19 19:06:30.366 Converting frame #8 from P to I
2006-10-19 19:06:36.869 Converting frame #9 from B to I
2006-10-19 19:06:36.882 Converting frame #10 from B to I
2006-10-19 19:06:36.895 Converting frame #11 from P to I
2006-10-19 19:06:40.468 Unknown socket closing
2006-10-19 19:06:41.749 Transcode Running for Alias "Phase One": 1.5 GB => 0 byt
es (Autodetect)
2006-10-19 19:06:41.836 transcode: Transcode Running: Alias "Phase One"
2006-10-19 19:06:41.843 Transcode Starting for Alias "Phase One": 1.5 GB (Autode
tect)
2006-10-19 19:06:41.846 transcode: Transcode Starting: Alias "Phase One": 1.5 GB
 (Autodetect)
2006-10-19 19:06:42.995 Using runtime prefix = /usr
2006-10-19 19:06:43.179 New DB connection, total: 1
2006-10-19 19:06:43.230 Enabled verbose msgs: important
2006-10-19 19:06:43.268 New DB connection, total: 2
2006-10-19 19:06:43.274 Connected to database 'mythconverg' at host: localhost
2006-10-19 19:06:43.276 Transcoding from /myth/tv/1628_20061019130000.mpg to /my
th/tv/1628_20061019130000.mpg.tmp
2006-10-19 19:06:43.337 Connecting to backend server: 127.0.0.1:6543 (try 1 of 5
)
2006-10-19 19:06:43.345 Using protocol version 26
2006-10-19 19:06:43.351 MainServer::HandleAnnounce Monitor
2006-10-19 19:06:43.352 adding: homenet-pvr as a client (events: 0)
[mpeg @ 0xb70c4278]Parser not found for Codec Id: 94210 !
0: start_time: 0.036 duration: 323.327
1: start_time: 303.714 duration: 323.337
2: start_time: 0.025 duration: 323.281
stream: start_time: 0.276 duration: 6966.954 bitrate=1814 kb/s
2006-10-19 19:06:43.848 AFD: Opened codec 0x80f0240, id(MPEG2VIDEO) type(Video)
2006-10-19 19:06:43.874 AFD: Opened codec 0x80f0e30, id(MP2) type(Audio)
2006-10-19 19:06:44.072 New DB connection, total: 3
2006-10-19 19:06:44.073 Connected to database 'mythconverg' at host: localhost
2006-10-19 19:06:44.080 Switching to MPEG-2 transcoder.
2006-10-19 19:06:44.089 Opening /myth/tv/1628_20061019130000.mpg
2006-10-19 19:06:44.090 Parser not found for Codec Id: 94210 !
2006-10-19 19:06:44.100 Input #0, mpeg, from '/myth/tv/1628_20061019130000.mpg':
2006-10-19 19:06:44.101   Duration: N/A, bitrate: N/A
2006-10-19 19:06:44.102   Stream #0.0[0x1e0], 25.00 fps(r): Video: mpeg2video, y
uv420p, 352x576, 3200 kb/s
2006-10-19 19:06:44.102   Stream #0.1[0x69]: Data: 0x0000
2006-10-19 19:06:44.102   Stream #0.2[0x1c0]: Audio: mp2, 48000 Hz, stereo, 256
kb/s
2006-10-19 19:06:44.103 Skipping unsupported codec 2 on stream 1
2006-10-19 19:06:44.105 #0 PTS:00:00:00.400 Delta: 0.0ms queue: 11
2006-10-19 19:06:44.106 #2 PTS:00:00:00.396 Delta: 4.28889ms queue: 2
2006-10-19 19:06:44.835 Converting frame #9 from B to I
2006-10-19 19:06:44.848 Converting frame #10 from B to I
2006-10-19 19:06:44.861 Converting frame #11 from P to I
Mux rate: 3.51 Mbit/s
2006-10-19 19:07:12.865 Converting frame #6 from B to I
2006-10-19 19:07:12.878 Converting frame #7 from B to I
2006-10-19 19:07:12.891 Converting frame #8 from P to I
2006-10-19 19:07:44.706 Converting frame #0 from B to I
2006-10-19 19:07:44.720 Converting frame #1 from B to I
2006-10-19 19:07:50.322 Converting frame #6 from B to I
2006-10-19 19:07:50.335 Converting frame #7 from B to I
2006-10-19 19:07:50.346 Converting frame #8 from P to I
2006-10-19 19:08:31.797 Converting frame #3 from B to I
2006-10-19 19:08:31.837 Converting frame #4 from B to I
2006-10-19 19:08:31.854 Converting frame #5 from P to I
2006-10-19 19:08:36.738 Converting frame #6 from B to I
2006-10-19 19:08:36.750 Converting frame #7 from B to I
2006-10-19 19:08:36.763 Converting frame #8 from P to I
2006-10-19 19:08:42.845 Converting frame #9 from B to I
2006-10-19 19:08:42.857 Converting frame #10 from B to I
2006-10-19 19:08:42.869 Converting frame #11 from P to I
2006-10-19 19:08:46.666 Unknown socket closing
2006-10-19 19:08:48.024 Transcode Errored for Alias "Phase One": 1.5 GB => 0 byt
es (Autodetect)
2006-10-19 19:08:48.134 transcode: Transcode Errored: Alias "Phase One"
2006-10-19 19:15:19.635 TFW, Error: Write() -- IOBOUND begin cnt(2048) free(1111
)
2006-10-19 19:15:20.820 TFW, Error: Write() -- IOBOUND end


So looking at the above and the other reference, only using the svn version of 0.19 or upgrading to 0.20 will fix this, yes?
The DVD creation works (CD/DVD->Burn DVD) and respects the cut points, but removing the Ads & dead space before carrying this out would be better.

Though, googling for transcode and IOBOUND results in the following: Ticket #1791 Stop transcode/commflag from hogging the CPU while recording/playback is in progress.
I'll try recording something and then transcoding while nothing else is happening, to see if the above is the cause of my particular problem.

_________________
Updated 2019/10/26: AthlonII X2 265 Gigabyte GA-970A-DS3P
16Gb PC 1866 DDR3, 500GB+2TB+4TB SATA HDD,
SATA DVD-RW Asus DRW-24D5MT , NVIDIA GeForce GT1080
Hauppauage Nova-T 500, Nova-T LinHes R8.6.1
Top
 Profile  
 
tjc
 Post subject:
PostPosted: Thu Oct 19, 2006 6:09 pm 
Offline
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location: Arlington, MA
This is a known breakage with R5D1.
Top
 Profile  
 
bruce_s01
 Post subject:
PostPosted: Fri Oct 20, 2006 3:20 am 
Offline
Joined: Tue Aug 08, 2006 7:08 pm
Posts: 561
Location: UK
Thanks, tjc for that info.
FYI, tried running it against a previously cutlisted recording, when neither in recording or playback modes, it failed but without IOBOUND error messages.
Code:
{last few lines}
2006-10-20 10:04:32.299 Converting frame #1 from B to I
2006-10-20 10:04:32.325 Inserting 2 I-Frames after #5
2006-10-20 10:04:32.369 Unknown socket closing
2006-10-20 10:04:33.124 Transcode Errored for Starkey's Last Word: 569.3 MB => 0
 bytes (Autodetect)
2006-10-20 10:04:33.197 transcode: Transcode Errored: Starkey's Last Word

_________________
Updated 2019/10/26: AthlonII X2 265 Gigabyte GA-970A-DS3P
16Gb PC 1866 DDR3, 500GB+2TB+4TB SATA HDD,
SATA DVD-RW Asus DRW-24D5MT , NVIDIA GeForce GT1080
Hauppauage Nova-T 500, Nova-T LinHes R8.6.1
Top
 Profile  
 
borgednow
 Post subject:
PostPosted: Sun Oct 22, 2006 12:42 am 
Offline
Joined: Wed Aug 23, 2006 3:07 pm
Posts: 339
tjc wrote:
This is a known breakage with R5D1.


Ah ok, thanks.

It's not so much a problem anyway. If I don't burn something to dvd, I'd generally just delete it. If I do burn it to dvd, I use the create dvd iso which works fine.

Worst case, I could always create an iso and put it in the video section if I don't want to make it a dvd.
Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 3
  [ 31 posts ] 
Go to page Previous  1, 2, 3  Next


Board index Linux MythTV

All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 3 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu