Linux version 2.6.17-chw-8 (root@mythtv) (gcc version 3.4.4 20050314 (prerelease) (Debian 3.4.3-13)) #1 SMP PREEMPT Sun Jul 30 12:38:47 PDT 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000ea000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000bbf0000 (usable)
 BIOS-e820: 000000000bbf0000 - 000000000bbffc00 (ACPI data)
 BIOS-e820: 000000000bbffc00 - 000000000bc00000 (ACPI NVS)
 BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
187MB LOWMEM available.
On node 0 totalpages: 48112
  DMA zone: 4096 pages, LIFO batch:0
  Normal zone: 44016 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f72b0
ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x0bbfc7bc
ACPI: FADT (v001 COMPAQ Wrangler 0x06040000 PTL_ 0x000f4240) @ 0x0bbffb8c
ACPI: DSDT (v001 Compaq Wrangler 0x06040000 MSFT 0x0100000b) @ 0x00000000
ACPI: PM-Timer IO Port: 0x8008
Allocating PCI resources starting at 10000000 (gap: 0bc00000:f43e0000)
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=Linux ro root=301 splash=silent apm=power-off nomce
bootsplash: silent mode.
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01182000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 598.242 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 183696k/192448k available (4215k kernel code, 8264k reserved, 1593k data, 252k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1197.00 BogoMIPS (lpj=598504)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 24k freed
ACPI: setting ELCR to 0400 (from 0a00)
CPU0: Intel Celeron (Coppermine) stepping 03
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 56k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd83e, last bus=1
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 8000-80ff claimed by vt82c586 ACPI
PCI quirk: region 8080-808f claimed by vt82c686 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 7 9 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 9) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 7 *9 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 7 9 *11 12)
ACPI: Embedded Controller [EC] (gpe 6) interrupt mode.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:06: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:06: ioport range 0x220-0x22f has been reserved
pnp: 00:06: ioport range 0x388-0x38b has been reserved
pnp: 00:06: ioport range 0x8000-0x808f could not be reserved
pnp: 00:06: ioport range 0x9050-0x9051 has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: disabled.
  MEM window: f4100000-f57fffff
  PREFETCH window: 14000000-140fffff
PCI: Bus 2, cardbus bridge: 0000:00:0a.0
  IO window: 00001800-000018ff
  IO window: 00001c00-00001cff
  PREFETCH window: 10000000-11ffffff
  MEM window: 12000000-13ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 98304 bytes)
TCP bind hash table entries: 4096 (order: 3, 49152 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
JFS: nTxBlock = 1436, nTxLock = 11492
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
PCI: Disabling Via external APIC routing
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 7.0.33-k2
Copyright (c) 1999-2005 Intel Corporation.
pcnet32.c:v1.32 18.Mar.2006 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
winbond-840.c:v1.01-d (2.4 port) Nov-17-2001  Donald Becker <becker@scyld.com>
  http://www.scyld.com/network/drivers.html
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:07.1
    ide0: BM-DMA at 0x1420-0x1427, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1428-0x142f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: TOSHIBA MK6015MAP, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TOSHIBA DVD-ROM SD-C2502, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 11733120 sectors (6007 MB), CHS=12416/15/63, UDMA(33)
hda: cache flushes not supported
 hda: hda1 hda2 hda3
hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
libata version 1.20 loaded.
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: automatically using best checksumming function: pIII_sse
   pIII_sse  :  1136.000 MB/sec
raid5: using function: pIII_sse (1136.000 MB/sec)
raid6: int32x1    183 MB/s
raid6: int32x2    238 MB/s
raid6: int32x4    160 MB/s
raid6: int32x8    152 MB/s
raid6: mmxx1      542 MB/s
input: AT Translated Set 2 keyboard as /class/input/input0
raid6: mmxx2      695 MB/s
atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
raid6: sse1x1     109 MB/s
raid6: sse1x2     222 MB/s
raid6: using algorithm sse1x2 (222 MB/s)
md: raid6 personality registered for level 6
md: multipath personality registered for level -4
md: faulty personality registered for level -5
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 15
Using IPI No-Shortcut mode
Suspend2 Core.
Suspend2 Compression Driver loading.
Suspend2 Encryption Driver loading.
Suspend2 Swap Writer loading.
Suspend2 FileWriter loading.
ACPI wakeup devices:
PWRB PS2K USB0 CRD0
ACPI: (supports S0 S1 S4 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Suspend2 2.2.7.3: You need to use a resume2= command line parameter to tell Suspend2 where to look for an image.
Suspend2 2.2.7.3: Resume2 parameter is empty. Suspending will be disabled.
Suspend2 2.2.7.3: Missing or invalid storage location (resume2= parameter). Please correct and rerun lilo (or equivalent) before suspending.
Synaptics Touchpad, model: 1, fw: 4.6, id: 0xf42a1, caps: 0x80471b/0x0
input: SynPS/2 Synaptics TouchPad as /class/input/input1
(fs/jbd/recovery.c, 255): journal_recover: JBD: recovery, exit status 0, recovered transactions 3215 to 3384
(fs/jbd/recovery.c, 257): journal_recover: JBD: Replayed 647 and revoked 0/0 blocks
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda1, internal journal
ext3_orphan_cleanup: deleting unreferenced inode 474637
ext3_orphan_cleanup: deleting unreferenced inode 439665
ext3_orphan_cleanup: deleting unreferenced inode 439664
EXT3-fs: hda1: 3 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 252k freed
Adding 275932k swap on /dev/hda2.  Priority:-1 extents:1 across:275932k
EXT3 FS on hda1, internal journal
megasas: 00.00.02.04 Fri Feb 03 14:31:44 PST 2006
3ware Storage Controller device driver for Linux v1.26.02.001.
3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
Adaptec aacraid driver (1.1-5[2409]-mh1)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 11, io base 0x00001400
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1.1: new full speed USB device using uhci_hcd and address 3
usb 1-1.1: configuration #1 chosen from 1 choice
usb 1-1.2: new full speed USB device using uhci_hcd and address 4
usb 1-1.2: configuration #1 chosen from 1 choice
usb 1-1.4: new full speed USB device using uhci_hcd and address 5
usb 1-1.4: configuration #1 chosen from 1 choice
ieee1394: Initialized config rom entry `ip1394'
Generic RTC Driver v1.07
ACPI: AC Adapter [AC] (off-line)
ACPI: Battery Slot [BAT0] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Thermal Zone [THRM] (43 C)
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
Yenta: CardBus bridge found at 0000:00:0a.0 [0e11:b103]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0a.0, mfunc 0x01001002, devctl 0x64
Yenta: ISA IRQ mask 0x0038, PCI irq 9
Socket status: 30000006
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
parport_pc: VIA parallel port: io=0x378, irq=7
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA Apollo ProMedia/PLE133Ta chipset
agpgart: AGP aperture is 64M @ 0xf8000000
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:07.5 to 64
Linux video capture interface: v1.00
drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
drivers/usb/net/rtl8150.c: eth0: rtl8150 is detected
usbcore: registered new driver rtl8150
lirc_dev: IR Remote Control driver registered, at major 61

lirc_mceusb2: USB remote driver for LIRC v0.22
lirc_mceusb2: Martin Blatter <martin_a_blatter@yahoo.com>
usb 1-1.4: reset full speed USB device using uhci_hcd and address 5
lirc_dev: lirc_register_plugin: sample_rate: 0
lirc_mceusb2[5]: SMK eHome Infrared Transceiver on usb1:5
usbcore: registered new driver lirc_mceusb2
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bt878: AUDIO driver version 0.0.0 loaded
saa7146: register extension 'dvb'.
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'budget_av'.
usbcore: registered new driver ttusb
usbcore: registered new driver ttusb-dec
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ttyS0: LSR safety check engaged!
ttyS0: LSR safety check engaged!
ttyS1: LSR safety check engaged!
ttyS1: LSR safety check engaged!
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
drivers/usb/net/rtl8150.c: eth0: allmulti set
drivers/usb/net/rtl8150.c: eth0: allmulti set
drivers/usb/net/rtl8150.c: eth0: allmulti set
NET: Registered protocol family 17
drivers/usb/net/rtl8150.c: eth0: allmulti set
drivers/usb/net/rtl8150.c: eth0: allmulti set
drivers/usb/net/rtl8150.c: eth0: allmulti set
Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon!
eth0: no IPv6 routers present
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
via686a 0000:00:07.4: base address not set - upgrade BIOS or use force_addr=0xaddr

usb 1-1.1: USB disconnect, address 3
new full speed USB device using uhci_hcd and address 6
configuration #1 chosen from 1 choice

usb 1-1.1: USB disconnect, address 6
new full speed USB device using uhci_hcd and address 7
configuration #1 chosen from 1 choice