View unanswered posts    View active topics

Board index Linux MythTV

All times are UTC - 6 hours





Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
glennph93
PostPosted: Sun Jun 03, 2007 1:55 pm 
Offline
Joined: Thu Oct 26, 2006 8:40 am
Posts: 45
Location: Ohio
Hi,

I've read the Known issues section of R5F1 hints and hazards. This issue doesn't seem to apply since I'm upgrading from R5E50.
When myth first boots and I go to watchtv it has sound but no picture, when I exit and go back to watchtv the picture is there. Another thing once it went to static after watching for awhile(reboot fixed).

Its a pvr-150 card, a7n266-e board, mx4000 video card, and 768mb ram.

Dmesg seems to have correct card:
Code:
Jun  3 14:57:11 mythtv kernel: ivtv:  ==================== START INIT IVTV ====================
Jun  3 14:57:11 mythtv kernel: ivtv:  version 0.10.1 (tagged release) loading
Jun  3 14:57:11 mythtv kernel: ivtv:  Linux version: 2.6.18-chw-13 SMP preempt mod_unload 586 gcc-4.1
Jun  3 14:57:11 mythtv kernel: ivtv:  In case of problems please include the debug info between
Jun  3 14:57:11 mythtv kernel: ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
Jun  3 14:57:11 mythtv kernel: ivtv:  any module options, when mailing the ivtv-users mailinglist.
Jun  3 14:57:11 mythtv kernel: ivtv0: Autodetected Hauppauge card (cx23416 based)
Jun  3 14:57:11 mythtv kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
Jun  3 14:57:11 mythtv kernel: ivtv0: Encoder revision: 0x02060039
Jun  3 14:57:11 mythtv kernel: tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
Jun  3 14:57:11 mythtv kernel: ivtv0: Autodetected Hauppauge WinTV PVR-150
Jun  3 14:57:11 mythtv kernel: ivtv0: reopen i2c bus for IR-blaster support
Jun  3 14:57:11 mythtv kernel: tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
Jun  3 14:57:11 mythtv kernel: cx25840 1-0044: cx25841-24 found @ 0x88 (ivtv i2c driver #0)
Jun  3 14:57:11 mythtv kernel: wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
Jun  3 14:57:11 mythtv kernel: ivtv0: Registered device video0 for encoder MPEG (4 MB)
Jun  3 14:57:11 mythtv kernel: ivtv0: Registered device video32 for encoder YUV (2 MB)
Jun  3 14:57:11 mythtv kernel: ivtv0: Registered device vbi0 for encoder VBI (1 MB)
Jun  3 14:57:11 mythtv kernel: ivtv0: Registered device video24 for encoder PCM audio (1 MB)
Jun  3 14:57:11 mythtv kernel: ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
Jun  3 14:57:11 mythtv kernel: ivtv:  ====================  END INIT IVTV  ================


Thanks in advance

_________________
HD homerun
Hauppauge WinTV-HVR-1600 ATSC/ClearQAM
1.5 TB
2 GB ram
ASUS M4A78 Plus AM3/AM2+/AM2 AMD 770 ATX AMD Motherboard
AMD Athlon II X2 250 Regor 3.0GHz Socket AM3 65W Dual-Core Processor
Top
 Profile  
 
tjc
 Post subject:
PostPosted: Sun Jun 03, 2007 7:08 pm 
Offline
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location: Arlington, MA
Where's the rest of it? You must have done "grep ivtv" because you're missing all the tveeprom data. See the sed command on this page: http://www.knoppmythwiki.org/index.php?page=CheckingLogFiles

The new drivers used in R5F1 require new firmware which means you need to shut the machine down cold and leave it off long enough (1-2 minutes is usually plenty) for the card to fully clear.
Top
 Profile  
 
glennph93
 Post subject:
PostPosted: Mon Jun 04, 2007 2:05 pm 
Offline
Joined: Thu Oct 26, 2006 8:40 am
Posts: 45
Location: Ohio
tjc wrote:
The new drivers used in R5F1 require new firmware which means you need to shut the machine down cold and leave it off long enough (1-2 minutes is usually plenty) for the card to fully clear.


Yep that solved my problem.

Here is a more complete log: (although my problem is solved)
Code:
ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 0.10.1 (tagged release) loading
ivtv:  Linux version: 2.6.18-chw-13 SMP preempt mod_unload 586 gcc-4.1
ivtv:  In case of problems please include the debug info between
ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
ivtv:  any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 18
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNKD] -> GSI 18 (level, high) -> IRQ 16
ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Encoder revision: 0x02060039
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
tveeprom 1-0050: Hauppauge model 26132, rev F1B2, serial# 9851208
tveeprom 1-0050: tuner model is TCL M2523_5N_E (idx 112, type 50)
tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 1-0050: audio processor is CX25841 (idx 35)
tveeprom 1-0050: decoder processor is CX25841 (idx 28)
tveeprom 1-0050: has no radio, has IR receiver, has IR transmitter
ivtv0: Autodetected Hauppauge WinTV PVR-150
ivtv0: reopen i2c bus for IR-blaster support
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
cx25840 1-0044: cx25841-24 found @ 0x88 (ivtv i2c driver #0)
  Vendor: Sony      Model: Storage Media     Rev: 3.04
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sda: 127840 512-byte hdwr sectors (65 MB)
sda: Write Protect is off
sda: Mode Sense: 45 00 00 08
sda: assuming drive cache: write through
SCSI device sda: 127840 512-byte hdwr sectors (65 MB)
sda: Write Protect is off
sda: Mode Sense: 45 00 00 08
sda: assuming drive cache: write through
 sda: sda1
sd 0:0:0:0: Attached scsi removable disk sda
usb-storage: device scan complete
cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: Registered device video0 for encoder MPEG (4 MB)
ivtv0: Registered device video32 for encoder YUV (2 MB)
ivtv0: Registered device vbi0 for encoder VBI (1 MB)
ivtv0: Registered device video24 for encoder PCM audio (1 MB)
tuner 1-0061: type set to 50 (TCL 2002N)
ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
ivtv:  ====================  END INIT IVTV  ====================


Thanks again for another great version of Knoppmyth and for the help.

_________________
HD homerun
Hauppauge WinTV-HVR-1600 ATSC/ClearQAM
1.5 TB
2 GB ram
ASUS M4A78 Plus AM3/AM2+/AM2 AMD 770 ATX AMD Motherboard
AMD Athlon II X2 250 Regor 3.0GHz Socket AM3 65W Dual-Core Processor
Top
 Profile  
 
tjc
 Post subject:
PostPosted: Mon Jun 04, 2007 7:34 pm 
Offline
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location: Arlington, MA
I've added a note about this to the known IVTV changes.
Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 


Board index Linux MythTV

All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 5 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu